Thamtu L100
Thamtu L100 Robot Vacuum User Manual
Model: L100
Introduction
Welcome to the Thamtu L100 Robot Vacuum User Manual. This guide provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new robotic vacuum cleaner. Please read this manual thoroughly before using the product and retain it for future reference.
Safety Instructions
To reduce the risk of injury or damage, read these safety instructions carefully and keep them accessible during product use.
- This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Cleaning and user maintenance shall not be made by children without supervision.
- Only use the original power adapter provided by the manufacturer.
- Do not use the robot in environments with open flames or fragile objects.
- Ensure the charging base is placed on a level surface against a wall, with clear space around it.
- Do not immerse the robot or its components in water.
- Regularly clean the brushes and sensors to maintain optimal performance.
What's in the Box
Verify that all components are present and in good condition upon unpacking.

The Thamtu L100 Robot Vacuum, accompanied by its remote control and a smartphone displaying the control application.

Detailed view of the packing list, illustrating all accessories included with the Thamtu L100 Robot Vacuum.
- L100 Robot Vacuum
- Remote and AAA Batteries
- Fastening Cable Ties
- Filter
- Cleaning Brush
- Side Brushes
- APP User Guide
- User Manual
- Power Adapter
- Charging Base
Product Overview
The Thamtu L100 Robot Vacuum is designed for efficient home cleaning with smart navigation and powerful suction.

The L100 features 2500Pa super suction, effectively cleaning both wooden floors and low pile carpets.

An illustration of the robot's powerful suction and no-entanglement design, highlighting the main brush and edge-sweeping brush for comprehensive cleaning.

The ultra-thin 2.9-inch design allows the robot vacuum to glide effortlessly under furniture for a thorough clean.
Setup
1. Charging Base Placement
Place the charging base against a wall on a hard, level surface. Ensure there is at least 0.5 meters (1.6 feet) of clear space on either side and 1.5 meters (4.9 feet) in front of the charging base to allow the robot to dock properly.
2. Initial Charging
Before first use, fully charge the robot. Connect the power adapter to the charging base and plug it into a wall outlet. Place the robot onto the charging base, ensuring the charging contacts align. The indicator light on the robot will show charging status.

The robot vacuum automatically returns to its charging base when the battery is low, ensuring it's always ready for the next cleaning cycle.
3. App Download and Connection
For smart control features, download the "Hi Robot" app from the App Store or Google Play. Follow the in-app instructions to connect your robot to your home 2.4 GHz Wi-Fi network.

The 'Hi Robot' app provides customized smart control, including schedule cleaning, spot cleaning, and manual control.
Operating the Robot Vacuum
Cleaning Modes
The L100 offers multiple cleaning modes to suit your needs:
- Automatic Sweeping: The robot intelligently navigates and cleans your entire floor area.
- Edge Sweeping: The robot cleans along walls and furniture edges.
- Spot Sweeping: The robot focuses on a specific dirty area, cleaning in a spiral pattern.

Visual representation of the robot's cleaning patterns for edge, spot, and automatic sweeping modes.
Starting a Cleaning Cycle
You can start a cleaning cycle using the following methods:
- Robot Button: Press the power button on the robot once to start automatic cleaning.
- Remote Control: Use the 'Auto' button on the remote control.
- Mobile App: Select your desired cleaning mode and start cleaning from the 'Hi Robot' app.
- Voice Control: Connect to Amazon Alexa or Google Assistant and use commands like "Alexa, turn on L100."

The L100 Robot Vacuum supports control via its dedicated app, remote control, and voice commands through Alexa or Google Assistant.

Effortlessly start cleaning tasks using voice commands, app control, or the remote control.
Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your robot vacuum.

An innovative user-friendly structure design features a 450 ml large capacity dust box, portable carrying handle, and high-efficiency air filter for easy maintenance.
1. Emptying the Dustbin
Empty the dustbin after each cleaning cycle. Press the dustbin release button, remove the dustbin, open its lid, and discard debris. Rinse the dustbin with water if necessary, and allow it to air dry completely before reinserting.
2. Cleaning the Filter
The high-efficiency filter should be cleaned weekly using the provided cleaning brush. Replace the filter every 2-3 months, or more frequently depending on usage.
3. Cleaning Brushes
Main Brush: Remove the main brush cover and lift out the main brush. Use the cleaning tool to remove hair and debris tangled around the brush. Reinstall the brush and cover.
Side Brushes: Check the side brushes regularly for wear or damage. If they are bent or damaged, replace them. Remove tangled hair or debris from the side brushes.

The 2-stage cleaning system features dual multi-surface brushes and an edge-sweeping brush to effectively grab dirt from carpets and hard floors, and clean corners and edges.
4. Cleaning Sensors and Charging Contacts
Wipe the anti-drop sensors, anti-collision sensors, and charging contacts on both the robot and the charging base with a clean, dry cloth. This ensures proper navigation and charging.
Troubleshooting
If your robot vacuum encounters an issue, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Robot does not turn on | Low battery; Power switch off | Charge the robot; Ensure power switch is ON |
| Robot cannot charge | Charging contacts dirty; Charging base not powered | Clean charging contacts; Check power connection to base |
| Reduced suction power | Dustbin full; Filter clogged; Brushes tangled | Empty dustbin; Clean/replace filter; Clean main/side brushes |
| Robot gets stuck frequently | Obstacles; Sensors dirty | Clear obstacles; Clean anti-drop/anti-collision sensors |
| Cannot connect to Wi-Fi | Incorrect Wi-Fi password; Router issues; 5GHz network | Verify password; Restart router; Ensure 2.4GHz network is used |
Specifications
Detailed technical specifications for the Thamtu L100 Robot Vacuum.
- Model Name: L100
- Brand: Thamtu
- Product Dimensions: 12.6"L x 12.6"W x 3"H (32 x 32 x 7.6 cm)
- Item Weight: 6.1 Pounds (2.77 kg)
- Suction Power: 2500 Pa (Max)
- Battery: 1 Lithium Ion battery (included)
- Runtime: Up to 120 minutes on hardwood surfaces
- Dustbin Capacity: 450 ml
- Special Features: Anti-Collision, Anti-Fall, Smart Navigation, WiFi Connected, Self-Charging
- Color: Steel Black
Warranty and Support
Thamtu products are designed and manufactured to the highest standards. For warranty information and customer support, please refer to the warranty card included in your product packaging or visit the official Thamtu website. If you encounter any issues not covered in this manual, please contact our customer service team for assistance.
Thamtu Customer Service: Please refer to the contact information provided on the product packaging or the official Thamtu website for the most up-to-date support channels.
Related Documents - L100
![]() |
Thamtu Robotic Vacuum Cleaner: Frequently Asked Questions & Troubleshooting Guide Find solutions to common issues with your Thamtu robotic vacuum cleaner, including activation, remote control, charging, Wi-Fi connection, suction power, and abnormal movements. This FAQ provides troubleshooting steps and contact information for support. |
![]() |
THAMTU G11 Robotic Vacuum Cleaner Instructions Manual This manual provides detailed instructions for the Thamtu G11 Robotic Vacuum Cleaner, covering setup, operation, maintenance, and troubleshooting for optimal performance. |
![]() |
Thamtu G2 Robotic Vacuum Cleaner - User Manual Comprehensive user manual for the Thamtu G2 Robotic Vacuum Cleaner, covering setup, operation, cleaning modes, mopping, maintenance, specifications, and troubleshooting. |
![]() |
L100 Inverter Error Codes and Descriptions A comprehensive guide to L100 inverter error codes, providing detailed names and descriptions for effective troubleshooting and maintenance. |
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.



