Moimhear Loft Bed 90 x 200 cm Instruction Manual

1. Introduction

This manual provides comprehensive instructions for the assembly, safe use, and maintenance of your Moimhear Loft Bed (Model LDB00050). Please read all instructions carefully before assembly and use to ensure safety and proper function.

2. Important Safety Information

WARNING: Failure to follow these safety instructions could result in serious injury.

• Exercise caution during assembly and use.
• Do not allow children to climb onto the loft bed unsupervised.
• Observe the maximum load capacity of the bed.
• Handle metal bed frame components with care to prevent injury.
• The bed must be securely fastened to a wall to prevent tipping. Use appropriate wall anchors for your wall type (M10 anchors recommended, not always included).
• Ensure all connections are tight before use and periodically check for tightness.
• Only use a mattress of the specified size (90 x 200 cm). The mattress height should not exceed 12 cm to maintain adequate guardrail height.

3. Product Overview

The Moimhear Loft Bed is designed to maximize space in smaller rooms, offering a sleeping area above and versatile space below. It features a robust metal frame, integrated storage stairs, and a wardrobe section.

Key Features:

• Stable Structure: Constructed from high-quality metal for excellent stability and load-bearing capacity.
• Space-Saving Design: Creates a functional area below the bed for study, work, or relaxation.
• Integrated Storage Stairs: Features a safe ladder design with integrated storage compartments and a wardrobe space underneath.
• Full Mesh Guardrail: The upper bed includes a secure iron mesh guardrail for safety.

Figure 3.1: Moimhear Loft Bed (White) with integrated stairs and space for a sofa underneath.

4. Package Contents

Your Moimhear Loft Bed is delivered in three separate packages, which may arrive on different days. Please ensure all packages have arrived before beginning assembly.

Upon receipt, verify that all components listed in the assembly instructions are present and undamaged. The package includes:

• Metal bed frame components
• Staircase components with integrated storage
• Guardrails
• Assembly instructions
• Necessary assembly tools (e.g., Allen wrench)
• Note: Mattress is not included. Wall mounting hardware (e.g., M10 anchors) may not be included and should be purchased separately based on your wall type.

5. Setup and Assembly

Assembly requires two people. Follow the detailed assembly instructions provided in your package. Ensure you have sufficient space for assembly.

General Assembly Steps:

1. Unpack and Identify Parts: Carefully unpack all components and lay them out. Compare them with the parts list in the assembly manual.
2. Assemble the Main Bed Frame: Connect the main vertical and horizontal metal beams according to the diagrams. Do not fully tighten screws until all parts are aligned.
3. Install Bed Slats and Guardrails: Secure the bed slats onto the frame. Attach the mesh guardrails to the upper bed frame.
4. Assemble the Stairs and Storage Unit: Construct the staircase and integrated storage/wardrobe unit.
5. Attach Stairs to Bed Frame: Securely attach the assembled staircase unit to the main bed frame.
6. Final Tightening: Once all components are in place and aligned, fully tighten all screws and bolts.
7. Wall Anchoring: For maximum stability and safety, it is essential to anchor the loft bed to a sturdy wall. Use appropriate wall anchors (e.g., M10) for your wall material.

Figure 5.1: Dimensions of the Moimhear Loft Bed. Note the overall dimensions and specific heights for the bed and under-bed space.

Figure 5.2: Detail of the integrated staircase with storage shelves and a wardrobe section.

6. Usage Guidelines

Mattress Requirements:

• The bed is designed for a mattress size of 90 x 200 cm.
• The recommended maximum mattress height is 12 cm to ensure the safety height of the guardrails.

Safe Use:

• Always use the provided staircase for climbing up and down the bed. Do not jump onto or off the bed.
• Do not exceed the maximum weight capacity of the bed.
• Ensure children are supervised when using the loft bed.
• Keep the area around the bed clear of obstructions.

7. Care and Maintenance

• Cleaning: Wipe the metal frame and wooden surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals.
• Regular Inspection: Periodically check all bolts and screws to ensure they remain tight. Re-tighten if necessary.
• Structural Integrity: Inspect the bed frame and slats for any signs of damage or wear. Replace damaged parts immediately.

8. Troubleshooting

9. Product Specifications

10. Warranty and Support

For warranty information or technical support, please refer to your purchase documentation or contact the retailer where the product was purchased. Keep your proof of purchase for any warranty claims.

If you have questions regarding assembly or missing parts, please contact Moimhear customer service through the platform of purchase.