Introduction
This manual provides detailed instructions for the Auxbeam Wireless Remote Control, designed specifically for the AC-1200 12 Gang Switch Panel. Please read this manual thoroughly before use to ensure proper operation and to maximize the product's functionality.
Image: The Auxbeam Wireless Remote Control, featuring 12 numbered buttons and an ON/OFF button.
Setup
Battery Installation
The remote control comes with a pre-installed CR2477/3V battery, ready for immediate use. If battery replacement is needed, refer to the Maintenance section.
Pairing the Remote Control
Follow these two steps to pair your wireless remote control with the AC-1200 12 Gang Switch Panel:
- Step 1: Simultaneously press the ON/OFF button and any numbered button on the AC-1200 Switch Panel. Hold until the red indicator light on the panel illuminates.
- Step 2: Press the ON/OFF button on the 12-channel wireless remote control. The green indicator light on the panel will flash twice, confirming successful pairing.
Image: Visual guide demonstrating the two-step pairing process and the unpairing method for the remote control and switch panel.
Unpairing the Remote Control
To unpair the remote control from the switch panel, long press the ON/OFF button on the AC-1200 Switch Panel for 12 seconds. This will clear the pairing.
Multiple Remote Control Usage
One AC-1200 circuit control box can be paired with up to four wireless remote controls simultaneously. Additional remote controls are sold separately.
Image: Illustration showing one AC-1200 switch panel paired with four separate wireless remote controls.
Operating Instructions
The Auxbeam Wireless Remote Control allows for convenient operation of your AC-1200 12 Gang Switch Panel from a distance.
- Functionality: Each numbered button (1-12) on the remote corresponds to a specific circuit on the AC-1200 switch panel, allowing you to turn connected accessories ON or OFF. The ON/OFF button on the remote controls the overall power state or memory function of the panel.
- Range: The remote operates with a range of up to 165 feet (50 meters) in an interference-free environment.
- Synchronization: The operation of the remote control, the AC-1200 panel, and the Bluetooth mobile app (if used) is synchronized.
- Placement: The remote control features a magnet on its back, allowing it to be easily attached to any metal surface for convenient storage and access.
Image: Diagram illustrating the wireless remote control's effective operating range of 165 feet (50 meters) from a vehicle.
Image: Visual representation of the remote control synchronizing with the AC-1200 switch panel, showing corresponding button states.
Image: The remote control's compact size (2.3" x 4") and integrated magnet for easy attachment to metal surfaces.
Maintenance
Battery Replacement
The remote control uses a CR2477/3V lithium metal battery. To replace the battery:
- Carefully open the battery compartment on the back of the remote control.
- Remove the old battery.
- Insert a new CR2477/3V battery, ensuring correct polarity.
- Close the battery compartment securely.
Cleaning
To clean the remote control, use a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these may damage the surface or internal components.
Troubleshooting
- Remote not pairing: Ensure the AC-1200 switch panel is powered on. Re-attempt the pairing steps carefully. If issues persist, try unpairing any existing connections from the switch panel before re-pairing.
- Limited operating range: Check for potential sources of interference (e.g., other wireless devices, large metal objects) between the remote and the switch panel. Ensure the remote's battery is not low.
- Remote unresponsive: Check the battery. If the battery is low or depleted, replace it with a new CR2477/3V battery.
- Buttons not responding: Ensure the remote is properly paired. If only specific buttons are unresponsive, there might be an internal issue; contact customer support.
Specifications
| Feature | Specification |
|---|---|
| Model | AC-1200 Remote Control |
| Compatibility | Auxbeam AC-1200 12 Gang Switch Panel |
| Frequency | 433MHz |
| Channels | 12-Channel |
| Operating Range | Up to 165 feet (50 meters) in interference-free environment |
| Battery Type | 1 x CR2477/3V Lithium Metal (included) |
| Dimensions | 2.3" x 4" (approximate) |
| Special Feature | Ergonomic design, Magnetic back |
Warranty and Support
Auxbeam products are designed for reliability and performance. This product is covered by a 2-year service period from the manufacturer. For technical assistance, troubleshooting, or warranty claims, please contact Auxbeam customer support through their official channels.
For more information, visit the Auxbeam Store.
