1. Introduction
Thank you for choosing the PPLEE Wireless Vibrating Alarm Clock. This device is designed to provide a reliable and effective wake-up solution, especially for heavy sleepers, individuals with hearing impairment, or those who prefer a silent alarm. It features wireless vibration, dual alarms, multiple awake modes, and a rechargeable battery for portability and convenience.
Please read this manual thoroughly before using the product to ensure proper operation and to maximize its features.
Image 1: Front view of the PPLEE Wireless Vibrating Alarm Clock, displaying the time and alarm indicators.
2. Product Overview
Package Contents:
- PPLEE Wireless Vibrating Alarm Clock
- USB Type-C Charging Cable
- User Manual
Device Layout:
Image 2: Overview of the alarm clock showing its compact size and key features like Dual Alarms, 12/24 Hour mode, Child Lock, USB Charger, Snooze, Battery Powered, 3 Awake Modes, and 3-Levels Vibration Strength.
The alarm clock features a clear LCD display on the front. Control buttons are located on the top and sides for easy access. A Type-C charging port is located on the side.
3. Setup
3.1 Charging the Device
Before first use, fully charge the alarm clock. Connect the provided USB Type-C cable to the charging port on the device and plug the other end into a USB power adapter (not included) or a computer USB port. The battery indicator on the display will show charging status. A full charge takes approximately 4 hours and provides up to 3 months of operation.
Image 3: The alarm clock connected to a USB charging port, illustrating the Type-C connection.
3.2 Setting the Time
- Press the TIME/SNOOZE button to enter time setting mode. The hour digits will flash.
- Use the + and - buttons to adjust the hour.
- Press TIME/SNOOZE again to confirm the hour and move to minute setting. The minute digits will flash.
- Use the + and - buttons to adjust the minutes.
- Press TIME/SNOOZE to confirm the minutes and exit time setting.
12/24 Hour Format:
While in time setting mode, press the VIBRATION SETTING button to switch between 12-hour (AM/PM) and 24-hour formats.
Daylight Saving Time (DST) Function:
Press the + button on the top of the clock to activate or deactivate the DST function. When activated, the time will automatically advance by one hour.
3.3 Setting Alarms (Alarm 1 & Alarm 2)
The clock supports two independent alarms. Follow these steps for each alarm:
- Press the ALARM 1 or ALARM 2 button to select the desired alarm. The alarm time will flash.
- Use the + and - buttons to adjust the hour.
- Press the selected ALARM button again to confirm the hour and move to minute setting.
- Use the + and - buttons to adjust the minutes.
- Press the selected ALARM button to confirm the minutes and exit alarm time setting.
Image 4: The alarm clock displaying two different alarm settings, one for a weekday and one for the weekend, illustrating the dual alarm functionality.
Weekday/Weekend Mode:
After setting the alarm time, use the WEEKDAY MODE switch (located on the side/back) to select the alarm schedule:
- MON-FRI: Alarm activates Monday to Friday.
- SAT-SUN: Alarm activates Saturday and Sunday.
- MON-SUN: Alarm activates every day.
Selecting Awake Modes:
The alarm clock offers three awake modes: vibrate only, ring only, or vibrate + ring. Press the ALARM MODE button (usually near the alarm setting buttons) repeatedly to cycle through these options. The corresponding icon will appear on the display.
Image 5: The alarm clock illustrating the three selectable alarm modes: Buzzer Sound & Vibration, Louder Buzzer Sound, and Vibration only.
Adjusting Vibration Strength:
The device has 3 levels of vibration strength (Low, Medium, High). Use the VIBRATION SETTING switch/button to select your preferred intensity.
Image 6: Close-up of the alarm clock indicating the three vibration strength levels (L, M, H) via a switch.
Adjusting Alarm Volume:
If you select a ring or vibrate + ring mode, you can adjust the alarm volume. Use the VOLUME buttons (often combined with +/-, or a dedicated switch) to set the desired sound level. There are 5 adjustable volume levels.
Image 7: The alarm clock displaying adjustable alarm volume levels and different alarm types (Buzzer & Vibration, Vibrating, Buzzer).
4. Operating the Alarm Clock
4.1 Snooze Function
When an alarm sounds or vibrates, press the large SNOOZE/TIME button on the top of the clock to temporarily silence it. The alarm will reactivate after 9 minutes.
Image 8: The alarm clock with the snooze function activated, indicating a 9-minute delay before the alarm reactivates.
4.2 Child Lock Function
To prevent accidental changes to settings or to save battery power, activate the child lock. Locate the CHILD LOCK switch (usually on the side or bottom) and slide it to the 'ON' position. This will disable most buttons.
Image 9: The alarm clock demonstrating the child lock feature, showing a small switch to enable or disable it.
4.3 Backlight Operation
The LCD display has a built-in backlight. The screen will automatically dim after 30 seconds to save power. Press any button to activate the backlight for clear viewing in low-light conditions.
4.4 Optimal Placement for Vibration
For effective vibration, place the alarm clock in one of the following locations:
- Under your pillow.
- Under a fitted sheet.
- Between the mattress and box spring.
Image 10: Illustrations showing recommended placements for the vibrating alarm clock: under a pillow, under a fitted sheet, and between the mattress and box spring.
5. Maintenance
5.1 Cleaning
Wipe the device with a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents as they may damage the surface. Avoid exposing the device to excessive moisture.
5.2 Battery Care
To prolong battery life, avoid fully discharging the battery frequently. Recharge the device when the low battery indicator appears. If storing the device for an extended period, charge it fully every few months.
6. Troubleshooting
- Alarm not activating:
- Ensure the alarm is set correctly (time, AM/PM, weekday/weekend mode).
- Check that the alarm mode (vibrate, ring, or both) is selected.
- Verify the child lock is not engaged.
- Ensure the battery is charged.
- Display is dim or blank:
- Press any button to activate the backlight.
- Charge the device if the battery is low.
- Device not charging:
- Check the USB Type-C cable for damage and ensure it is securely connected.
- Try a different USB power adapter or port.
- Time inaccuracy:
- Reset the time manually.
- Ensure the DST function is correctly set for your region.
- Buttons unresponsive:
- Check if the child lock is engaged.
- Try resetting the device by pressing the RESET button (if available, often a small pinhole).
7. Specifications
| Feature | Description |
|---|---|
| Brand | PPLEE |
| Model Number | CR1027 |
| Color | Black |
| Display Type | LCD Digital |
| Power Source | Battery Powered (Rechargeable Lithium Ion) |
| Battery Capacity | 3000mAh |
| Charging Port | USB Type-C |
| Product Dimensions | 3.35"W x 3.35"H (approximate) |
| Item Weight | 1.6 ounces |
| Alarm Features | Dual Alarms, Weekday/Weekend Modes, 3 Awake Modes (Vibrate Only, Ring Only, Vibrate + Ring), 3 Vibration Strengths, 5 Adjustable Volumes, 9-Minute Snooze |
| Additional Features | Backlight, 12/24H Mode, DST Function, Child Lock |
8. Warranty and Support
8.1 Warranty Information
The PPLEE Wireless Vibrating Alarm Clock comes with a Lifetime Warranty. This warranty covers manufacturing defects and ensures the product's quality and performance under normal use.
8.2 Customer Support
For any questions, technical assistance, or warranty claims, please contact PPLEE customer support through the retailer's platform or visit the official PPLEE website for contact information. Please have your model number (CR1027) and purchase details ready when contacting support.
