1. Important Safety Information
Please read and understand all instructions before beginning assembly and use. Failure to follow these instructions may result in injury or damage to the product.
- Keep all small parts away from children during assembly.
- Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as necessary.
- Do not stand or jump on the bed frame.
- Use the bed frame on a flat, level surface.
- Do not exceed the maximum weight capacity of 900 lbs.
- Disconnect power to the charging station before cleaning or if any electrical issues arise.
2. Package Contents
Verify that all components are present before starting assembly. If any parts are missing or damaged, contact customer support.
- Headboard with integrated LED light and charging station
- Metal bed frame components
- Wood slats with rubber strips
- Assembly hardware (bolts, screws, Allen wrench)
- Installation Manual
Image: Overview of components and assembly recommendations. Two people are recommended for assembly.
3. Setup and Assembly
3.1 Before You Begin
- Clear a spacious area for assembly.
- It is recommended that two people assemble this bed frame.
- Lay out all components and hardware, comparing them with the parts list in the included manual.
3.2 Assembly Steps
The bed frame features a snap-fit design for simplified assembly. Refer to the detailed installation manual included in your package for step-by-step instructions and diagrams.
- Attach the side rails to the headboard and footboard using the provided hardware.
- Install the central support beam and legs.
- Place the wood slats onto the frame. Ensure the rubber strips on each slat are properly positioned to increase mattress stability and reduce noise.
- Connect the power cord for the LED lights and charging station.
- Verify all connections are secure before placing a mattress on the frame.
4. Operating Instructions
4.1 LED Light Operation
The integrated LED light strip in the headboard offers customizable illumination.
- Use the control panel or remote (if included) to power on/off the lights.
- Select from 19 dynamic effects and 20 static color options.
- Adjust the dynamic speed across 5 levels.
- Set the brightness to one of 5 available levels.
Image: The bed frame showcasing its RGB LED lighting capabilities.
Image: Detailed view of the RGB LED light strip and its customizable settings.
4.2 Charging Station Usage
The 2-tier storage headboard includes a built-in charging station for convenience.
- The charging station features two 110V/12A AC outlets and two 3V/2A USB ports.
- Connect the bed frame's power cord to a standard wall outlet.
- Use the AC outlets for devices requiring standard power, such as lamps or laptops.
- Use the USB ports to charge compatible devices like smartphones and tablets.
Image: The headboard's integrated charging station with power outlets and USB ports.
Image: The 2-layer storage space and charging station, showing devices being charged.
5. Maintenance and Care
- Cleaning the Frame: Wipe the metal and PU leather surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
- Cleaning the Headboard: For the PU leather headboard, use a mild leather cleaner if necessary, following the product instructions.
- Regular Inspection: Periodically check all bolts and screws to ensure they remain tight. Re-tighten as needed to maintain stability and prevent noise.
- Electrical Components: Ensure the charging station and LED light connections are dry and free from debris. Do not attempt to repair electrical components yourself.
6. Troubleshooting
- LED Lights Not Working:
Check if the power cord is securely plugged into both the bed frame and the wall outlet. Ensure the control panel or remote is functioning and batteries (if applicable) are not depleted. - Charging Station Not Functioning:
Verify the bed frame's power cord is properly connected. Test the outlets/USB ports with different devices to rule out device-specific issues. If still not working, ensure the wall outlet itself is operational. - Bed Frame is Noisy/Wobbly:
Inspect all assembly points. Tighten any loose bolts or screws. Ensure the bed frame is on a level surface. The rubber strips on the slats are designed to reduce noise; ensure they are correctly positioned. - Missing or Damaged Parts:
If you received missing or damaged parts, refer to the customer support section for assistance.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | YF10227 |
| Size | Full |
| Product Dimensions | 83"L x 56"W x 42.3"H |
| Material | Engineered Wood, Metal, PU Leather |
| Color | Rustic Brown |
| Weight Capacity | 900 lbs |
| Under-bed Clearance | 12 Inches |
| Charging Station | 2 AC Outlets (110V/12A), 2 USB Ports (3V/2A) |
| LED Lights | RGB, 19 Dynamic Effects, 20 Static Effects, 5 Speed Levels, 5 Brightness Levels |
| Box Spring Needed | No |
| Recommended Mattress Thickness | 10-14 inches |
Image: Detailed dimensions of the LUXOAK Full Size Bed Frame.
Image: Mattress thickness recommendations for optimal fit.
Image: Visual representation of the under-bed clearance for storage.
8. Warranty Information
This LUXOAK product is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase or contact customer support for specific details regarding coverage and duration.
9. Customer Support
For assistance with assembly, missing parts, troubleshooting, or warranty claims, please contact LUXOAK customer support.
- Online Support: Visit the official LUXOAK store for FAQs and contact options: LUXOAK Store
- Email: Refer to your purchase documentation for direct email contact.
