ROOMTEC Queen Vertical Murphy Bed Hardware Kit Instruction Manual

1. Product Overview

This document provides detailed instructions for the assembly, operation, and maintenance of your ROOMTEC Queen Vertical Murphy Bed Hardware Kit. This kit is designed to facilitate the construction of a space-saving queen-sized vertical wall bed. The hardware components are crafted from high-quality alloy steel, ensuring strength and durability.

Important Note: This hardware kit does not include the wood panels or mattress required for the complete Murphy bed assembly. These items must be sourced separately according to the specified dimensions and weight requirements.

Figure 1: Illustration of components not included with the hardware kit.

2. Safety Information

Adherence to all safety guidelines is crucial during installation and use to prevent injury or damage.

• Wall Mounting: The completed Murphy bed frame must be securely fastened to a structural wall before attempting to lower or raise the bed. Failure to do so poses a significant risk of the bed falling. Different wall types may require specific fasteners; consult a professional if unsure.
• Material Selection: For the bed frame and cabinet construction, use hardwood only. Plywood is not recommended as it may bend or warp under the pressure exerted by the bed mechanism.
• Mattress Specifications: Ensure the mattress used is less than 12 inches thick and weighs between 50-65 lbs to ensure proper operation of the piston mechanism.
• Professional Assistance: If you are not experienced in carpentry or construction, consider hiring a qualified professional for assembly and installation.

Figure 2: Safety warning regarding wall mounting.

3. Components List

The ROOMTEC Queen Vertical Murphy Bed Hardware Kit includes the following essential components:

• Hydraulic Piston Rods (2 units)
• Heavy-Duty Support Legs (2 units)
• Mounting Plates and Brackets
• Fasteners (screws, nuts, bolts)
• Door Stop Caps (2 units)
• Installation Templates

Figure 3: All hardware components included in the kit.

3.1. Piston Rods

The kit features upgraded hydraulic piston rods designed for smooth, quiet, and effortless lifting. These rods have undergone extensive testing (50,000 lift cycles) to ensure long-term durability and optimal performance. The metal connection ports are engineered to resist wear, extending the product's lifespan.

Figure 4: Easy-lift piston hydraulic rod with durable metal connection.

3.2. Support Legs

The heavy-duty support legs are designed for stability and ease of use. Their square design increases contact area with the floor, enhancing weight bearing capacity. Anti-slip insulating rubber stoppers are included to protect your flooring from scratches. Built-in positioning templates facilitate quick and accurate connection to the bed supports.

Figure 5: Features of the foldable heavy-duty support legs.

3.3. Other Hardware Details

Additional hardware features include 5mm high-strength solid carbon steel construction for critical components, two door stop caps for cushioning protection, a black matte coating for waterproofing and rustproofing, and a fine welding process ensuring no visible welding marks.

Figure 6: Close-up of various hardware components and their features.

4. Setup and Installation

This DIY kit is designed to be user-friendly for individuals with basic carpentry skills. It includes all necessary hardware, detailed instructions, and a video guide to assist you in building your folding bed frame and cabinet.

4.1. Required Tools (Not Included)

• Drill
• Screwdriver
• Measuring Tape
• Saw (for cutting wood panels)
• Level
• Safety Glasses and Gloves

4.2. Assembly Steps Overview

The kit includes a comprehensive assembly guide, positioning cardboard, and a wood panel cutting and installation guide. Follow these resources carefully for successful assembly.

Figure 7: Example of detailed assembly guides and templates provided.

4.3. Online Installation Video

For visual guidance, an official installation video is available. It demonstrates the step-by-step process of assembling the Murphy bed hardware and integrating it with your chosen wood panels.

4.4. Dimensions and Space Requirements

Before purchasing or cutting wood, ensure you have adequate space for the completed Queen Vertical Murphy Bed. The approximate dimensions are:

• Height: 87 inches
• Width: 66 inches
• Depth (Closed): 16 inches
• Unfolded Depth (Open): 86 inches

Figure 8: Queen Size Vertical Murphy Bed dimensions in open and closed positions.

5. Operating Instructions

Once properly installed and secured to the wall, operating your Murphy bed is straightforward:

1. To Lower the Bed: Gently pull the bed frame downwards from the top. The hydraulic piston mechanism will assist in a controlled and smooth descent.
2. To Raise the Bed: Lift the bed frame upwards from the bottom. The hydraulic pistons will engage to help lift and hold the bed securely in its vertical, closed position.

Always ensure the area around the bed is clear before lowering or raising it.

6. Maintenance

To ensure the longevity and optimal performance of your ROOMTEC Murphy Bed Hardware Kit, follow these simple maintenance guidelines:

• Cleaning: Wipe all hardware components with a dry cloth to remove dust and debris. Avoid using abrasive cleaners or solvents that could damage the finish.
• Inspection: Periodically inspect all screws, bolts, and connections to ensure they remain tight. Re-tighten any loose fasteners as needed.
• Piston Functionality: Check the hydraulic piston rods for any signs of wear or damage. Ensure they operate smoothly and quietly.
• Lubrication: If any moving parts begin to squeak or feel stiff, apply a small amount of silicone-based lubricant to the pivot points.

7. Troubleshooting

If you encounter issues with your Murphy bed, consider the following troubleshooting steps:

• Bed Does Not Close Completely:
  • Verify that the mattress weight is within the recommended range (50-65 lbs). An incorrect mattress weight can affect piston performance.
  • Check for any obstructions preventing the bed from fully closing.
  • Ensure the piston rods are correctly installed and securely attached at both ends.
• Bed Feels Too Heavy/Light to Operate:
  • This is often related to an incorrect mattress weight. Refer to the specifications for the recommended mattress weight.
  • Confirm that the piston rods are the correct type and strength for your bed size.
• Squeaking or Grinding Noises:
  • Apply lubricant to moving parts and pivot points as described in the Maintenance section.
  • Check for any loose fasteners and tighten them.
• Bed Wobbles or Feels Unstable:
  • Re-verify that the bed cabinet is securely anchored to the wall.
  • Ensure all connections within the bed frame and cabinet are tight.
  • Confirm that the wood used for construction is hardwood and not plywood, which can lead to instability.

If these steps do not resolve the issue, please contact ROOMTEC customer service for further assistance.

8. Specifications

9. Warranty and Support

ROOMTEC stands behind the quality of its products. All hardware components included in this kit come with a lifetime warranty. Additionally, the upgraded piston rods are covered by a free replacement policy for damage within three years.

For any questions, technical assistance, or warranty claims, please contact our US customer service center. We offer 24-hour online support to ensure you receive prompt and helpful service.

Visit the ROOMTEC Store for more information and support resources.