1. Introduction
Thank you for choosing the MEIKEE 35W LED Floodlight with Motion Sensor. This manual provides essential information for the safe installation, operation, and maintenance of your floodlight. Please read these instructions carefully before use and retain them for future reference.
2. Safety Information
Always observe basic safety precautions when installing, operating, or maintaining electrical equipment. Failure to do so may result in personal injury or property damage.
- Ensure the power supply is disconnected before installation or maintenance.
- Installation should be performed by a qualified electrician if you are unsure.
- Do not look directly into the LED light source when it is illuminated.
- The product is rated IP66 for the floodlight and IP65 for the sensor, indicating protection against dust and strong jets of water. It is suitable for outdoor use in various weather conditions.
- The lamp body is constructed from high-quality insulating material, and no ground wire is required for safe operation.
- The cable thickness meets the 1mm² standard for enhanced safety.
3. Package Contents
Verify that all components are present in the package:
- 1 x MEIKEE 35W LED Floodlight with Motion Sensor
- 1 x Screw Package (screws and wall plugs)
- 1 x Instruction Manual
Image: Packaging and included components: Floodlight, manual, and mounting screws.
4. Specifications
| Feature | Specification |
|---|---|
| Model Number | FLB035 |
| Power Consumption | 35W |
| Luminous Flux | 3000 lumens |
| Color Temperature | 6500K (Cool White) |
| Beam Angle | 120° |
| Motion Sensor Detection Angle | 180° |
| Motion Sensor Detection Distance | Up to 12 meters (pre-set) |
| Adjustable Lighting Duration | 10s, 45s, 120s, 600s |
| Ingress Protection (Floodlight) | IP66 |
| Ingress Protection (Sensor) | IP65 |
| Dimensions (L x W x H) | 6 x 18 x 16 cm |
| Weight | 620 grams |
| Material | Insulating materials + Nanomaterial (front frame) |
| Power Source | Electric Cable |
| Energy Efficiency Class | F (EPREL Link) |
Image: EU Energy Efficiency Label for MEIKEE FLB035 LED Floodlight.
5. Setup
5.1 Mounting the Floodlight
The floodlight features a 180° adjustable bracket and a sensor that can rotate 360° horizontally and 180° vertically, allowing for flexible installation angles. The widened and thickened steel bracket ensures secure mounting.
- Choose a suitable mounting location. The ideal mounting height for optimal motion detection is between 3.5 and 5 meters.
- Mark the drilling points on the wall, ceiling, or ground using the bracket as a template.
- Drill holes and insert the provided wall plugs.
- Secure the floodlight bracket to the surface using the provided screws.
- Adjust the floodlight and sensor to your desired angle.
Image: Mounting options: Ceiling, wall, and ground installation.
Image: Adjustable bracket (180°) and sensor (360° horizontal, 180° vertical).
5.2 Electrical Connection
The floodlight is designed for direct connection to your electrical system. It is double-insulated and does not require a ground wire.
- Connect the blue wire to the Neutral (N) terminal.
- Connect the brown wire to the Live (L) terminal.
- Ensure all connections are secure and properly insulated.
Image: Product dimensions and wiring diagram (Blue: Neutral, Brown: Live).
6. Operating Instructions
6.1 Motion Sensor Settings
The motion sensor features two adjustable settings: TIME and LUX. These settings are controlled via key switches on the sensor unit.
Image: Easy adjustment of TIME and LUX settings on the sensor.
- TIME Setting: This controls how long the light remains on after motion is detected. Available durations are 10 seconds, 45 seconds, 120 seconds, and 600 seconds. Select the desired duration using the 'TIME' button.
- LUX Setting: This determines the ambient light level at which the sensor becomes active.
- Sun Mode (Day): The light will activate when motion is detected, regardless of ambient light (works all day).
- Moon Mode (Night): The light will only activate when motion is detected and the ambient light is low (works only at night to save energy).
Image: Day and night lighting modes for energy saving.
6.2 Detection Area and Beam Angle
The motion sensor has a detection angle of 180° and a detection distance of up to 12 meters. The floodlight provides a wide 120° beam angle for extensive illumination.
Image: Detection area and optimal light coverage for the floodlight.
Image: Sensor detection angle (180°) and range (12m) with 120° beam angle.
7. Maintenance
Regular maintenance helps ensure the longevity and optimal performance of your MEIKEE LED Floodlight.
- Cleaning: Periodically clean the floodlight and sensor surface with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Inspection: Regularly check the mounting bracket and electrical connections for any signs of wear, damage, or loosening.
- Heat Dissipation: The floodlight features an integrated back design for efficient heat dissipation. Ensure that the rear fins are not obstructed to maintain proper cooling.
Image: Integrated back design for efficient heat dissipation and extended lifespan.
Image: Rear view showing heat dissipation fins.
8. Troubleshooting
If you encounter issues with your floodlight, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply; incorrect LUX setting; sensor malfunction. | Check power connection. Ensure LUX setting is appropriate for ambient light (e.g., Sun mode for daytime operation). Test sensor by waving hand in front. |
| Light stays on continuously. | Continuous motion detected; LUX setting too high (Sun mode at night); sensor malfunction. | Check for constant movement in the detection area. Adjust LUX to Moon mode for night-only operation. |
| Light turns on too frequently or randomly. | Sensor too sensitive; environmental factors (e.g., moving branches, small animals); incorrect LUX setting. | Adjust sensor angle to reduce detection area. Ensure no obstructions are causing false triggers. Verify LUX setting is correct. |
| Light flashes or flickers. | Unstable power supply; loose wiring connection; product defect. | Check electrical connections for tightness. Ensure stable power. If problem persists, contact support. |
| Motion detection range is too short/long. | Sensor angle incorrect; environmental factors. | Adjust the sensor's vertical and horizontal angles to optimize detection. Clear any obstructions. |
9. Warranty and Support
MEIKEE offers a 2-year warranty from the date of purchase for this product. If you have any questions, concerns, or require technical assistance, please do not hesitate to contact MEIKEE customer support. We are committed to providing a satisfactory solution within 24 hours.
For support, please refer to the contact information provided with your purchase or visit the official MEIKEE website.
