Introduction
The Valorise UG-08S Wireless Gaming Headset is designed to provide an immersive audio experience for gamers across multiple platforms. Featuring 7.1 surround sound, versatile connectivity options (2.4GHz wireless, Bluetooth 5.4, and 3.5mm wired), a retractable noise-canceling microphone, and long-lasting battery life, this headset is engineered for comfort and performance.
Image: The Valorise UG-08S Wireless Gaming Headset in black and red, showcasing its design and the included USB-A/Type-C dongle.
Image: A banner highlighting the Valorise Wireless Gaming Headset's key features: 7.1 Channel Mode, 100H Playtime, 2.4Ghz Wireless Tech, and Bluetooth 5.4.
This manual will guide you through the setup, operation, and maintenance of your Valorise UG-08S headset to ensure you get the most out of its advanced features.
What's in the Box
Please check the package contents to ensure all items are present:
- 1 x Valorise Wireless Gaming Headset
- 1 x USB & Type-C 2-in-1 Transmitter (Dongle)
- 1 x Type-C Charging Cable
- 1 x 3.5mm Braided Audio Cable
- 1 x User Manual
Setup Guide
1. Charging the Headset
Before first use, fully charge the headset. Connect the Type-C charging cable to the headset's charging port and the other end to a USB power source (e.g., computer USB port, USB wall adapter). The LED indicator will show charging status.
- Charging Time: Approximately 2-3 hours for a full charge.
- The headset supports simultaneous charging and use.
2. Connectivity Options
The Valorise UG-08S offers three primary connection methods:
Image: The headset's versatile 4-in-1 connection options, showing the USB-A/Type-C dongle connected to a laptop.
Image: A diagram illustrating the four connection modes: 2.4GHz Dongle (USB Type-C), 2.4GHz Dongle (USB Type-A), Bluetooth Mode, and Wired Mode (3.5mm Jack).
2.1. 2.4GHz Wireless Mode (Recommended for Gaming)
This mode provides ultra-low latency (≤5ms) for a seamless gaming experience.
- Identify the appropriate USB port on your device (USB-A or USB-C).
- Plug the 2-in-1 USB & Type-C transmitter (dongle) into your PC, PS5, PS4, or Mac. The dongle automatically adapts to USB-A or USB-C.
- Power on the headset by pressing and holding the Power button. The headset will automatically connect to the dongle.
- Ensure the headset is selected as the audio output and input device in your device's sound settings.
2.2. Bluetooth 5.4 Mode
Ideal for mobile devices, tablets, and Nintendo Switch (audio only).
- Ensure the headset is powered on.
- Triple-tap the 'M' button (or Power button, depending on model) to switch to Bluetooth mode. The LED indicator will flash blue, indicating pairing mode.
- On your mobile device, tablet, or laptop, go to Bluetooth settings and search for 'Valorise UG-08S' (or similar).
- Select the headset to pair. Once connected, the LED will turn solid blue.
2.3. 3.5mm Wired Mode
For universal compatibility with devices featuring a 3.5mm audio jack, including Xbox controllers (audio only, microphone invalid for Nintendo Switch and Xbox).
- Connect one end of the 3.5mm braided audio cable to the headset's 3.5mm audio port.
- Connect the other end to the 3.5mm audio jack on your desired device.
- The headset will automatically switch to wired mode. No power is required for wired audio playback.
Operating Instructions
1. Headset Controls
Image: A detailed view of the headset's controls, including the 7.1 mode/light control, charging port, 3.5mm audio port, power button, volume wheel, and mic mute button.
- Power Button: Press and hold to power on/off. Triple-tap to switch between 2.4GHz and Bluetooth modes.
- Volume Wheel: Scroll up or down to adjust the audio volume.
- Mic Mute Button: Press to mute/unmute the microphone. The microphone will have a small indicator light to show its status.
- 'M' Button (7.1 Mode / Light Control):
- Long-press to activate/deactivate 7.1 Surround Sound.
- Double-click to activate the ambient RGB light.
- Single-click (after activating light) to switch between steady light and gradient light modes.
2. 7.1 Surround Sound
Experience immersive audio with 7.1 virtual surround sound, providing precise positional audio cues in games.
Image: A visual representation of the 7.1 surround sound feature, emphasizing its cinema-grade auditory experience.
To activate 7.1 Surround Sound, long-press the 'M' button on the headset. Long-press again to deactivate.
3. Retractable Noise-Canceling Microphone
The 360° omnidirectional microphone features Environmental Noise Cancellation (ENC) to ensure clear communication with teammates.
Image: A cutaway view of the headset's ear cup showing the retractable microphone mechanism and the mute button.
- Retract/Extend: Gently pull out the microphone from the left ear cup to extend it. Push it back in to retract and conceal it when not in use.
- Mute: Use the dedicated Mic Mute button on the headset to quickly mute or unmute your voice.
4. RGB Lighting
The headset features dynamic RGB lighting on the ear cups to enhance your gaming atmosphere.
- Double-click the 'M' button to turn the RGB lights on.
- Single-click the 'M' button to cycle through different lighting modes (e.g., steady, gradient).
- To turn off the RGB lights, double-click the 'M' button again.
5. Battery Life Management
The Valorise UG-08S boasts an extended battery life, varying by usage mode:
Image: An illustration detailing the headset's battery life: approximately 100 hours in Bluetooth mode (lights/mic off) and 45 hours in 2.4GHz dongle mode (lights/mic on).
- Bluetooth Mode (Lights & Mic Off): Up to 100 hours of playtime.
- 2.4GHz Dongle Mode (Lights & Mic On): Approximately 45 hours of playtime.
- A low battery alert will notify you when recharging is needed.
- You can continue using the headset while it charges.
Maintenance
Proper care will extend the life and performance of your headset:
- Cleaning: Use a soft, dry cloth to wipe down the headset. For ear cushions, a slightly damp cloth can be used, but ensure they are completely dry before use. Avoid harsh chemicals or abrasive materials.
- Storage: Store the headset in a cool, dry place away from direct sunlight and extreme temperatures.
- Cable Care: Avoid sharp bends or kinks in the charging and audio cables to prevent damage.
- Water Resistance: The headset is not water resistant. Avoid exposure to liquids.
Troubleshooting
If you encounter issues with your Valorise UG-08S headset, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from headset | Headset not powered on; Incorrect audio output selected; Low battery; Dongle not properly connected; Bluetooth not paired. | Ensure headset is powered on and charged. Check device's sound settings to select headset as output. Re-insert dongle. Re-pair Bluetooth. |
| Microphone not working | Microphone muted; Incorrect audio input selected; Microphone not extended; Wired mode (for Switch/Xbox). | Unmute microphone. Check device's sound settings to select headset as input. Ensure microphone is fully extended. Note: Microphone is invalid in wired mode for Nintendo Switch and Xbox. |
| Poor audio quality / Disconnections | Interference; Out of range; Low battery. | Move closer to the dongle/Bluetooth device. Ensure no strong interference sources nearby. Charge the headset. |
| Headset not connecting via 2.4GHz | Dongle not recognized; Headset not in 2.4GHz mode. | Try plugging the dongle into a different USB port. Ensure the headset is powered on and automatically connects to the dongle. |
| RGB lights not working | Lights turned off. | Double-click the 'M' button to activate the RGB lights. |
| Cannot connect to Xbox | Wireless function not supported. | The headset's wireless function is not compatible with Xbox Series. Only wired mode via 3.5mm cable is supported for Xbox (audio only). |
| PS5 only supports 2.4GHz dongle mode wireless connection, not Bluetooth connection. | Bluetooth connection attempt on PS5. | For PS5, use the 2.4GHz USB dongle for wireless connection. Bluetooth is not supported for wireless audio on PS5. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | UG-08S-001 |
| Connectivity Technology | Wireless (2.4GHz), Bluetooth 5.4, 3.5mm Removable Wired |
| Wireless Communication | Bluetooth 5.4, 2.4GHz USB-A & Type-C 2-in-1 Dongle |
| Audio Driver Type | Dynamic Driver |
| Frequency Response | 20 Hz - 20,000 Hz |
| Impedance | 32 Ohm |
| Noise Control | Sound Isolation (Passive Noise Cancellation), ENC Noise-Canceling Microphone |
| Microphone | Retractable, 360° Omnidirectional |
| Battery Life | Up to 100 Hours (Bluetooth, lights/mic off); 45 Hours (2.4GHz, lights/mic on) |
| Charging Time | 2-3 Hours |
| Bluetooth Range | 10 Meters |
| Audio Latency | 5 Milliseconds (2.4GHz) |
| Ear Placement | Over Ear |
| Material | Soft Memory Sponge Cushions, Breathable Fabric, Polycarbonate (PC), Acrylonitrile Butadiene Styrene (ABS) |
| Compatible Devices | PlayStation 4/5/Pro/Slim, PC, Mac, Laptop, Desktop, Phone, Pad, Tablet, Nintendo Switch (audio only), Other Bluetooth Enabled Devices |
| Weight | 1.57 pounds |
Warranty and Support
Valorise is committed to providing high-quality products and excellent customer service. Your Valorise UG-08S Wireless Gaming Headset comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions.
For any technical assistance, troubleshooting, or warranty claims, please contact Valorise customer support. Our professional support team and experienced engineers are available to provide comprehensive assistance and aim to respond within 0-24 hours.
For the most up-to-date contact information, please visit the official Valorise website or refer to the contact details provided on your product packaging.
Image: A customer support representative, symbolizing Valorise's commitment to professional service.