Lukirch Light Therapy Glasses-Pro Instruction Manual

Introduction

The Lukirch Light Therapy Glasses-Pro are designed to provide UV-free blue and white LED light therapy. This device aims to support natural relief for improved sleep, mood, energy levels, and to assist with jet lag or seasonal changes. This manual provides essential information for the safe and effective use of your light therapy glasses.

The Lukirch Light Therapy Glasses-Pro are designed to support energy, mood, sleep, and alleviate winter blues.

Safety Information

Please read all safety instructions before using the device. Keep this manual for future reference.

• Eye Safety: These light therapy glasses are designed to be safe for your eyes. They adhere to the IEC 62471 photobiological safety testing standard. The spectrum used is free from infrared and any wavelengths considered harmful to the human body.
• Gradual Brightness: The glasses feature a gradual brightness increase, allowing your eyes to adapt slowly to the blue and white light within 60 seconds when you begin using them.
• Chemical Odor: Some users have reported a strong plastic/chemical smell upon initial unboxing. If you experience this, air out the product in a well-ventilated area before use. Discontinue use if the odor causes discomfort, headache, or respiratory irritation.
• Dizziness/Headaches: If you experience dizziness or headaches during use, discontinue therapy immediately. Consult a healthcare professional if symptoms persist.
• Medical Conditions: Consult your doctor before use if you have any pre-existing eye conditions, light sensitivity, or are taking medications that increase light sensitivity.
• Children: Keep out of reach of children. This device is not intended for use by children.
• Water Exposure: The device is not waterproof. Avoid exposure to water or excessive moisture.

Package Contents

Ensure all items are present in the package:

• Lukirch Light Therapy Glasses-Pro
• Charging Cable (USB)
• Protective Hard Shell Case
• Alternate Nose Piece (if included)
• Instruction Manual (this document)

Product Overview

Familiarize yourself with the components of your Lukirch Light Therapy Glasses-Pro.

Detailed diagram of the light therapy glasses components.

1. Charging Interface: USB port for charging.
2. Switching and Timing Button: Controls power, light mode, and timer settings.
3. Charging and Power Indicator: LEDs indicating charging status and power level.
4. Timing Indicator Lamp: Displays selected timer duration.
5. Nose Pads: Adjustable for comfort.
6. Illuminant Module: Contains the blue and white LED light sources.

Side view of the Lukirch Light Therapy Glasses-Pro.

Setup

1. Initial Charging

Before first use, fully charge the device. Connect the provided USB charging cable to the charging interface on the glasses and to a suitable USB power source (e.g., computer, wall adapter). The charging indicator will show the charging status and turn off or change color when fully charged.

2. Adjusting Nose Pads

Adjust the nose pads for a comfortable and secure fit. The glasses are designed to be lightweight and compatible with prescription glasses or contact lenses without obstructing vision.

Operating Instructions

The Light Therapy Glasses-Pro feature a simple one-button operation for power, light mode, and timer settings.

1. Power On/Off

• To Power On: Press and hold the Switching and Timing Button for a few seconds until the light turns on. The brightness will gradually increase over 60 seconds.
• To Power Off: Press and hold the Switching and Timing Button again until the light turns off, or wait for the timer to automatically shut off the device.

2. Selecting Light Mode (Blue or White)

The glasses offer a dual-light (2-in-1 White and Blue) design. Studies indicate varying sensitivities to blue and white light. You can try each mode to determine which best suits your needs.

The glasses offer both blue and white light therapy modes.

• While the device is on, short press the Switching and Timing Button to cycle between Blue Light mode and White Light mode.
• Observe the light emitted from the illuminant module to confirm the selected mode.

3. Setting the Timer

The glasses are equipped with a timer function offering three preset durations:

• 15 minutes
• 30 minutes
• 45 minutes

To set the timer:

• After selecting your desired light mode, short press the Switching and Timing Button repeatedly to cycle through the timer options.
• The Timing Indicator Lamp will show the selected duration (e.g., one dot for 15 mins, two for 30 mins, three for 45 mins).
• Once the chosen time is reached, the glasses will automatically power off.

4. Recommended Usage

Wear the glasses for 15-45 minutes daily. Consistent use for over 7 days typically yields visible results. The portable design allows for therapy on the go, whether exercising, traveling, or working.

5. Compatibility with Vision Aids

These light therapy glasses are designed to be seamlessly compatible with contact lenses or prescription glasses, ensuring your vision is not interfered with during use.

The glasses can be worn comfortably over prescription glasses.

Maintenance

• Cleaning: Wipe the glasses gently with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
• Storage: Store the glasses in their protective hard shell case when not in use to prevent damage. Keep in a cool, dry place away from direct sunlight.
• Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the device regularly, even if not in daily use.

Troubleshooting

Specifications

Warranty and Support

For warranty information, technical support, or any questions regarding your Lukirch Light Therapy Glasses-Pro, please refer to the contact information provided with your purchase or visit the official Lukirch website. Please retain your proof of purchase for warranty claims.