ANJANK Multi-functional Wooden Alarm Clock

Introduction

This manual provides comprehensive instructions for the ANJANK Multi-functional Wooden Alarm Clock (Model: Clock AC190-Nature BT). Please read this manual carefully before use to ensure proper operation and to fully utilize all features, including the Bluetooth speaker, FM radio, wireless charging, and customizable alarm settings.

Product Overview

The ANJANK Multi-functional Wooden Alarm Clock is a versatile device designed to enhance your daily routine. It combines several essential functions into a single, stylish unit.

Key Features:

• Digital LED Display with 0-100% Dimmer
• Bluetooth 5.0 Speaker for wireless audio streaming
• FM Radio (76-108MHz) with automatic and manual tuning
• Wireless Charging Pad (5W/7.5W/10W output)
• USB Charging Port for additional device charging
• Multiple Alarm Settings with 9 customizable alarm sounds
• Sleep Timer Function (10-120 minutes)
• Stylish Wooden Design

Components:

The device features a front LED display, control buttons on the top panel, a wireless charging pad on the top surface, and various ports on the rear.

Image: The ANJANK multi-functional alarm clock, highlighting its core features: clock, FM radio, wireless charging, and Bluetooth speaker.

Setup

1. Power Connection:

Connect the provided power adapter to the DC 5V input port located on the back of the alarm clock. Plug the adapter into a standard wall outlet. The LED display will illuminate, indicating the device is powered on.

2. Initial Time Synchronization:

The clock may automatically synchronize its time when first connected to a Bluetooth device. If not, you can set the time manually as described in the Operating Instructions section.

Image: Rear view of the ANJANK alarm clock, illustrating the DC 5V power input and the USB charging port.

Operating Instructions

Setting Time:

1. Press and hold the TIME SET button.
2. Use the + and - buttons to adjust the hour, then press TIME SET to confirm.
3. Repeat the process to set the minutes.
4. Press TIME SET again to exit the time setting mode.

Setting Alarms:

1. Press and hold the AL SET button.
2. Use the + and - buttons to set the alarm time (hour, then minute), pressing AL SET to confirm each.
3. Select an alarm sound from the 9 available options using + and -. Press AL SET to confirm.
4. Adjust the alarm volume using the volume buttons.
5. Press AL SET to exit the alarm setting mode.
6. To activate or deactivate an alarm, short press the AL SET button. An alarm icon will appear or disappear on the display.
7. To snooze the alarm, press the SNOOZE button when the alarm sounds.
8. To stop the alarm, press any other button.

Image: An illustration showcasing the nine distinct alarm sounds available on the device, including natural sounds and musical tones.

Bluetooth Speaker Function:

1. Press the MODE button until "BT" appears on the display.
2. On your mobile device, enable Bluetooth and search for "ANJANK Clock".
3. Select "ANJANK Clock" to pair. A confirmation sound will indicate successful pairing.
4. You can now stream audio wirelessly from your device.
5. Adjust playback volume using the volume buttons on the clock or your connected device.

Image: A smartphone wirelessly connected to the ANJANK alarm clock via Bluetooth, demonstrating audio streaming capabilities.

FM Radio Function:

1. Press the MODE button until "FM" appears on the display.
2. Automatic Scan: Press and hold the PLAY/PAUSE button to automatically scan for and save available FM stations.
3. Manual Tuning: Short press the + or - buttons to manually tune to a specific frequency.
4. Recall Saved Stations: Short press the PLAY/PAUSE button to cycle through your saved stations.
5. Adjust the volume using the volume buttons.

Image: A visual representation of the FM radio function, showing the frequency range and the clock displaying an FM station.

Wireless Charging:

1. Place your Qi-compatible smartphone or device on the wireless charging pad located on the top surface of the clock.
2. Ensure the device is centered on the charging pad for optimal charging efficiency.
3. The charging indicator on your device will confirm the charging status.
4. The pad supports 5W, 7.5W, and 10W charging outputs, adapting to your device's requirements.

USB Charging Port:

1. Connect your device's USB charging cable to the USB-A port on the back of the clock.
2. This port provides standard USB charging for devices that are not Qi-compatible or for simultaneous charging.

Image: A smartphone undergoing wireless charging on the clock's top surface, alongside a smartwatch charging via the rear USB port, detailing various power outputs.

Display Dimmer:

1. Press the DIMMER button to cycle through the available brightness levels (0-100%).
2. Select the desired brightness for comfortable viewing in various lighting conditions, from bright daylight to complete darkness.

Image: A visual demonstration of the clock's 0-100% dimmer function, showing the LED display at different brightness settings.

Sleep Timer:

1. While playing audio (via Bluetooth or FM radio), press the SLEEP button.
2. Repeatedly press SLEEP to cycle through the sleep timer options (10, 20, 30, 60, 90, 120 minutes, or OFF).
3. The audio will automatically turn off after the selected duration.

Maintenance

Cleaning:

Use a soft, dry cloth to gently clean the surface of the alarm clock. Avoid using liquid cleaners, abrasive materials, or chemical solvents, as these may damage the finish or internal components.

Storage:

When not in use for extended periods, store the device in a cool, dry place, away from direct sunlight and extreme temperatures.

Avoid Moisture:

Keep the device away from water, high humidity, and any liquids to prevent electrical damage.

Troubleshooting

• Clock not powering on:
  Ensure the power adapter is securely connected to both the clock and a functional wall outlet. Try a different outlet to rule out power supply issues.
• Wireless charging not working:
  Verify that your device is Qi-compatible. Ensure your device is centered correctly on the charging pad. Remove any thick phone cases or metallic objects between your phone and the charging pad that might interfere with charging.
• Alarm not stopping:
  To stop the alarm, press any button on the clock except the SNOOZE button. If the alarm continues, try resetting the alarm settings.
• Poor FM radio reception:
  Try repositioning the clock to a different location to improve signal reception. Perform an automatic station scan again to find stronger signals.
• Bluetooth connection issues:
  Ensure the clock is in Bluetooth mode ("BT" displayed). Make sure Bluetooth is enabled on your mobile device and it is within the effective range (typically 10 meters). Try forgetting the "ANJANK Clock" device on your phone and re-pairing. Restarting both the clock and your mobile device can also resolve connection problems.
• Display too bright or too dim:
  Use the DIMMER button to adjust the display brightness to your preferred level.

Specifications

Warranty and Support

ANJANK products come with a standard manufacturer's warranty. For warranty claims, technical support, or any inquiries regarding your ANJANK Multi-functional Wooden Alarm Clock, please contact ANJANK customer service through the retailer where you purchased the product or visit the official ANJANK website for contact information.