1. Introduction
This manual provides essential information for the installation, operation, and maintenance of your EdvenA Motorcycle Handguard. These handguards are designed to protect your motorcycle's handlebars, levers, and controls from impacts and wind.
Constructed from extremely tough plastic, these handguards offer flexibility, absorbing impact effectively without transferring it directly to your handlebars or bar mounts, unlike rigid aluminum or steel alternatives.
2. Compatibility and Fitment
The EdvenA Handguard is compatible with a range of BMW motorcycle models. Please verify your motorcycle's model and year against the list below:
- Compatible with BMW R1200GS LC (2013-2019)
- Compatible with BMW R1200GS ADV (2013-2019)
- Compatible with BMW R1250GS LC (2019-2023)
- Compatible with BMW R1250GS ADV (2019-2023)
- Compatible with BMW F750GS (2018-2023)
- Compatible with BMW F850GS (2018-2023)
- Compatible with BMW F850GS ADV (2018-2023)
- Compatible with BMW S1000XR (2016-2019)
- Compatible with BMW F800GS ADV (2013-2019)
- Compatible with BMW F900XR (2020-2022)
- Compatible with BMW F900R (2020-2022)
This product includes one pair of hand windshields without the full handguard assembly, designed to install directly into your existing hand protector setup.
3. Product Features
- Material: High-quality ABS Plastic, ensuring durability and flexibility.
- Protection: Designed to shield motorcycle bars, levers, and controls.
- Impact Absorption: Flexible construction absorbs impact, reducing stress on handlebars.
- Wind Protection: Acts as a windshield to protect hands from wind and debris.
- Ease of Installation: Comes with all necessary mounting hardware for efficient setup.
4. Setup and Installation
Installation of the EdvenA Handguard is straightforward. It is designed to be installed on both sides of the handlebar, integrating with your existing hand protector system.
Installation Steps:
- Ensure your motorcycle is stable and turned off.
- Identify the mounting points on your existing hand protectors or handlebars.
- Align the EdvenA Handguard with the designated mounting points.
- Use the provided hardware (screws and washers) to secure the handguard.
- Tighten all fasteners firmly but do not overtighten, as this may damage the plastic or mounting points.
- Repeat the process for the other side of the handlebar.
- After installation, gently test the handguards to ensure they are securely attached and do not interfere with the operation of levers or controls.
Figure 4.1: EdvenA Handguard installed on a motorcycle handlebar, showing its integration with the existing setup.
Figure 4.2: A pair of EdvenA Handguards in grey, shown with the included mounting screws and washers.
5. Operating Instructions
The EdvenA Handguard operates passively once installed. Its primary function is to provide continuous protection to your motorcycle's controls and hands from environmental elements and minor impacts during riding. No active operation or user input is required after proper installation.
6. Maintenance
To ensure the longevity and effectiveness of your handguards, follow these simple maintenance guidelines:
- Cleaning: Clean the handguards regularly with mild soap and water. Avoid abrasive cleaners or solvents that could damage the plastic finish.
- Inspection: Periodically inspect the handguards for any signs of damage, cracks, or loose mounting hardware.
- Fastener Check: Ensure all mounting screws remain tight. Retighten if necessary, but avoid overtightening.
Figure 6.1: EdvenA Handguards are available in multiple colors, including Black, Grey, Clear, Green, and Yellow. Regular cleaning helps maintain their appearance.
7. Troubleshooting
Most issues related to the handguards can be resolved by ensuring proper installation.
| Problem | Possible Cause | Solution |
|---|---|---|
| Handguard feels loose or vibrates | Mounting screws are not tight enough. | Check and tighten all mounting screws. Ensure they are securely fastened to the handlebar or existing hand protector. |
| Handguard interferes with lever operation | Incorrect positioning during installation. | Loosen mounting screws, adjust the handguard's position to ensure clearance for levers, then retighten. |
| Visible damage to handguard | Impact or wear and tear. | If the damage compromises protection, consider replacing the handguard. |
8. Specifications
| Attribute | Detail |
|---|---|
| Brand | EdvenA |
| Model | Handguard Hand Shield Protector Windshield (A Grey) |
| Material | High-quality ABS Plastic |
| Color | Grey |
| Auto Part Position | Front (Handlebar) |
| Number of Pieces | 2 (One Pair) |
| Item Weight | 0.035 ounces |
9. Warranty Information
Specific warranty details for the EdvenA Handguard are not provided in this manual. For information regarding warranty coverage, terms, and conditions, please refer to the product packaging, the seller's website, or contact EdvenA customer support directly.
10. Customer Support
For technical assistance, installation queries, or any other support needs related to your EdvenA Handguard, please contact the seller or manufacturer. Contact information can typically be found on the product's purchase page or within the packaging materials.
Note: Always ensure to purchase genuine EdvenA products from authorized sellers to guarantee product authenticity and eligibility for support.
