Livofloral Side Table with Charging Station User Manual

1. Introduction

Thank you for choosing the Livofloral Side Table with Charging Station. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure safe and efficient use of your new furniture. Please read this manual thoroughly before assembly and retain it for future reference.

Figure 1.1: Livofloral Side Table with Charging Station (Light Gray)

2. Safety Information

WARNING: Electrical safety warning: Avoid using near liquids to prevent potential electrocution hazard.

• Ensure all parts are present and undamaged before assembly.
• Assemble the unit on a soft, clean surface to prevent scratches.
• Do not overtighten screws during assembly.
• Keep small parts away from children.
• Do not exceed the maximum weight recommendation of 110 pounds for the tabletop.
• Ensure the power cord is not pinched or damaged during or after assembly.

3. Package Contents

Please verify that all components listed below are included in your package. Refer to the included assembly diagram for visual identification of parts.

Figure 3.1: Product Dimensions and Charging Station Overview

Parts List:

• Tabletop (1)
• Side Frames (2)
• Drawer Panels (various)
• Shelves (various)
• Charging Station Unit (1)
• Drawer Slides (4 sets)
• Adjustable Feet (4)

Hardware List:

• Screws (various types and sizes)
• Allen Wrench
• Screwdriver (recommended, not always included)

4. Assembly Instructions

Follow these step-by-step instructions carefully. Numbered parts and hardware are included in the package. A screwdriver is recommended for easier assembly, though basic tools are provided.

Step 1: Assemble the Drawer Boxes

Attach the side and back panels to the front panel of each drawer using the provided screws. Ensure the grooves for the bottom panel are aligned.

Step 2: Attach Drawer Slides

Secure the drawer slides to the sides of the assembled drawer boxes and to the internal frame of the side table using the designated screws. Ensure smooth operation.

Step 3: Assemble the Main Frame

Connect the metal side frames to the wooden shelves and panels. Pay attention to the orientation of each piece as indicated in the instructions.

Step 4: Install the Charging Station

Carefully place the charging station unit into its designated slot on the second board. Secure it with the provided screws. Route the power cord through the cable management opening.

Figure 4.1: Integrated Safe Charging Station

Step 5: Insert Drawers and Attach Adjustable Feet

Slide the completed drawers into the frame. Attach the adjustable feet to the bottom of the table. Adjust them to ensure stability on uneven surfaces.

Figure 4.2: Adjustable Foot for Enhanced Stability

5. Operating Instructions

Using the Charging Station:

1. Plug the table's main power cord into a wall outlet.
2. Flip the power switch on the charging station to the 'ON' position.
3. Connect your devices to the 2 AC outlets, 2 USB ports, or 1 Type-C port.
4. To turn off power to the outlets, flip the switch to the 'OFF' position.

Figure 5.1: Charging Station in Use

Using the Storage Drawers:

The two wooden drawers feature smooth metal slide rails for easy opening and closing. They are suitable for storing personal essentials, books, or other small items.

Figure 5.2: Wooden Storage Drawers

Versatile Placement:

This side table is designed to fit various spaces, functioning as a nightstand, bedside table, sofa side table, or even an office desk/printer stand.

Figure 5.3: Table in a Narrow Living Room Space

6. Maintenance and Care

• Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals.
• Keep the table away from direct sunlight and extreme temperatures to prevent warping or discoloration.
• Regularly check and tighten all screws to ensure stability.
• Do not place hot items directly on the surface; use coasters.

7. Troubleshooting

Issue: Drawers are difficult to open/close.

• Solution: Check if the drawer slides are correctly installed and lubricated. Ensure no items are obstructing the drawer's path. Verify that all assembly screws are tightened appropriately.

Issue: Charging station is not working.

• Solution: Ensure the table's power cord is securely plugged into a functional wall outlet. Check that the power switch on the charging station is in the 'ON' position. Test with a different device to rule out device-specific issues.

Issue: Table is wobbly.

• Solution: Adjust the leveling feet at the bottom of the table to compensate for uneven flooring. Ensure all frame screws are securely tightened.

8. Specifications

9. Warranty and Support

Livofloral is committed to providing quality products and customer satisfaction. If you have any questions, concerns, or require assistance with your Livofloral Side Table, please do not hesitate to contact our customer support team. We will endeavor to reply as soon as possible.

For more information or to explore other products, visit the Livofloral Store on Amazon.