Goldair Pedestal Mist Fan (Model GPFM-401) User Manual

1. Introduction

This manual provides essential information for the safe operation, maintenance, and troubleshooting of your Goldair Pedestal Mist Fan, Model GPFM-401. Please read these instructions thoroughly before use and retain them for future reference.

The Goldair Pedestal Mist Fan is designed to provide effective cooling and humidification. Key features include a powerful 40 cm fan, a 3-liter water tank for misting, 90-degree oscillation, and convenient remote control operation.

2. Safety Instructions

WARNING: To reduce the risk of fire, electric shock, or injury, observe the following safety precautions:

• Always ensure the fan is placed on a stable, level surface.
• Do not operate the fan with a damaged cord or plug.
• Keep the fan away from water and other liquids. Do not immerse the fan in water.
• Unplug the fan from the power outlet before cleaning, servicing, or moving.
• Do not insert fingers or other objects through the grille when the fan is operating.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Use only clean tap water in the water tank. Do not add any chemicals or fragrances.
• Ensure the water tank cap is securely closed before operating the mist function.

3. Package Contents

Verify that all components are present in the packaging:

• Fan Head Assembly (Grille, Blades, Motor)
• Adjustable Stand Pole
• Water Tank Base Unit
• Remote Control
• User Manual (this document)

An image showing the Goldair Pedestal Mist Fan, black in color, with its main fan head, adjustable stand, water tank base, and a separate remote control unit.

4. Setup

4.1 Assembly

1. Carefully unpack all components from the packaging.
2. Attach the adjustable stand pole to the water tank base unit, ensuring it is securely fastened.
3. Mount the fan head assembly onto the top of the adjustable stand pole. Secure all locking mechanisms.
4. Ensure the front and rear grilles are properly aligned and secured to prevent access to the fan blades.

4.2 Filling the Water Tank

1. Ensure the fan is unplugged from the power outlet.
2. Remove the water tank from the base unit.
3. Unscrew the cap at the bottom of the water tank.
4. Fill the tank with clean tap water. Do not exceed the maximum fill line.
5. Securely screw the cap back onto the water tank.
6. Place the filled water tank back into the base unit, ensuring it is seated correctly.

4.3 Placement and Power Connection

• Place the fan on a firm, level surface, away from curtains or other objects that could obstruct airflow.
• Ensure there is adequate space around the fan for oscillation.
• Plug the power cord into a standard 230V AC electrical outlet.

5. Operating Instructions

The Goldair Pedestal Mist Fan can be operated using the control panel on the unit or the provided remote control.

5.1 Control Panel and Remote Control Functions

• Power Button: Turns the fan On or Off.
• Speed Button: Adjusts fan speed (Low, Medium, High).
• Mist Button: Activates or deactivates the mist function.
• Oscillation Button: Starts or stops the 90-degree oscillation.
• Timer Button: Sets the operating timer (if applicable, refer to specific model features).
• Mode Button: Selects different fan modes (e.g., Normal, Natural, Sleep - if applicable).

5.2 Remote Control Battery Installation

1. Open the battery compartment on the back of the remote control.
2. Insert the required batteries (typically AAA, not included) according to the polarity markings (+/-).
3. Close the battery compartment securely.

6. Maintenance

Regular cleaning and maintenance will ensure optimal performance and extend the lifespan of your fan.

6.1 Cleaning the Fan

1. Always unplug the fan before cleaning.
2. Use a soft, damp cloth to wipe down the exterior surfaces of the fan. Do not use abrasive cleaners or solvents.
3. To clean the fan blades, carefully remove the front grille (refer to assembly instructions in reverse). Wipe the blades with a soft cloth. Reattach the grille securely.

6.2 Cleaning the Water Tank and Misting Unit

1. Empty any remaining water from the tank.
2. Rinse the water tank thoroughly with clean water. For stubborn deposits, a mild detergent and soft brush can be used, followed by thorough rinsing.
3. Periodically clean the misting nozzle to prevent mineral buildup. Use a soft brush or cotton swab.
4. Ensure all parts are dry before reassembling and refilling.

6.3 Storage

When not in use for extended periods, unplug the fan, empty and clean the water tank, and store the fan in a cool, dry place, preferably in its original packaging.

7. Troubleshooting

Before contacting customer support, please refer to the following common issues and solutions:

8. Specifications

9. Warranty and Support

Information regarding spare part availability is not provided. For warranty claims, technical assistance, or further inquiries, please contact Goldair customer support through their official website or the retailer where the product was purchased.