SiOnyx Nightwave Camera User Manual

1. Introduction

The SiOnyx Nightwave is an ultra-low light marine camera designed to enhance situational awareness and navigation in challenging low-light conditions. Utilizing advanced Black Silicon CMOS sensor technology, it provides vivid color digital night vision, allowing users to see well beyond human eyesight. This manual provides detailed instructions for the proper setup, operation, and maintenance of your Nightwave camera.

Figure 1: SiOnyx Nightwave Camera

2. Safety Information

• Ensure all connections are secure and properly insulated to prevent electrical hazards, especially in a marine environment.
• Do not attempt to disassemble or modify the camera. This will void the warranty and may cause damage or injury.
• Keep the camera away from extreme temperatures and direct sunlight for prolonged periods.
• While the camera is water-resistant (IP67 rated), avoid submerging it beyond its specified depth and duration.
• Always consult with a qualified marine technician for complex installations or if you are unsure about any wiring procedures.

3. What's in the Box

Verify that all the following components are included in your package:

• SiOnyx Nightwave Camera
• Analog Video Cable [5M]
• SMA to BNC adapter
• BNC to RCA adapter
• Power Fuse & Fuse Holder
• Digital Video Cable USB [3M]

Figure 2: Package Contents

4. Product Overview

The Nightwave camera is designed for robust marine use, featuring a durable UV-resistant polycarbonate material and an IP67 water resistance rating. It provides a 44-degree viewing angle and a night vision range of up to 150 meters.

Key Features:

• Ultra-Low Light Performance: Captures crisp, shareable videos in near-moonless starlight conditions.
• Vivid Color Digital Night Vision: Provides enhanced visibility and detail compared to traditional monochrome night vision.
• Flexible Connectivity: Supports direct integration with marine multifunction displays (MFDs) and Wi-Fi streaming to mobile devices.
• Rugged Design: IP67 rated for water, sand, salt, and dust resistance, with dry nitrogen purging to prevent lens fogging.
• Easy Installation: Designed for both permanent surface mounting or temporary center mount applications.

Figure 3: Nightwave Camera Dimensions (5 inches x 5 inches x 6 inches)

5. Setup

5.1 Mounting Options

The Nightwave camera offers versatile mounting solutions:

• Permanent Mounting: The camera can be permanently mounted to a flat surface on your vessel using the provided hardware. Ensure the mounting location provides a clear field of view and is secure.
• Temporary Mounting: For flexible use, the camera can be temporarily mounted on a center mount (not included, but compatible with standard camera mounts).

Video 1: Easy Installation Guide

5.2 Power and Video Output Options

The Nightwave camera supports multiple power and video output configurations:

Notes:

• When powered by 12V DC using the factory-installed cable, Wi-Fi live streaming is available via the SiOnyx app, and analog video output is available via the SMA-BNC-RCA connector. USB video output is not available.
• When powered by USB (5V DC) using the provided USB cable, Wi-Fi live streaming is available via the SiOnyx app. USB video out can be used when the camera is plugged into a PC or laptop. Analog video output is not available.

Figure 4: Power and Video Output Options

5.3 Mobile App Installation

Download the official SiOnyx mobile app from the App Store (iOS) or Google Play Store (Android). The app allows for Wi-Fi video streaming and control of your Nightwave camera.

Figure 5: Flexible Connectivity Options

6. Operating Instructions

6.1 Powering On/Off

Connect the camera to a 12V DC power source or via the USB cable. The camera will automatically power on. To power off, disconnect the power source.

6.2 Using the Mobile App

Once the camera is powered on, open the SiOnyx app on your mobile device. Connect to the camera's Wi-Fi network (refer to the app for specific network name and password details). You can then view live video, capture images, and adjust settings directly from your device.

Figure 6: Mobile App Integration

6.3 MFD Integration

For integration with marine multifunction displays (MFDs), connect the camera using the appropriate analog video cables and adapters (SMA to BNC, BNC to RCA) to your MFD's video input. Consult your MFD's manual for specific video input configuration.

Figure 7: Night Vision Performance

Figure 8: Enhanced Situational Awareness

7. Maintenance

• Cleaning: Gently wipe the lens and camera body with a soft, clean, damp cloth. Avoid abrasive materials or harsh chemicals that could damage the lens coating or housing.
• Storage: When not in use for extended periods, store the camera in a cool, dry place, away from direct sunlight and extreme temperatures.
• Water Resistance: The IP67 rating ensures protection against water immersion up to 1 meter for 30 minutes. Always ensure all cable connections are secure before exposing the camera to water.
• Lens Fogging: The camera is dry nitrogen purged to prevent internal lens fogging. If external fogging occurs, allow the camera to acclimate to the ambient temperature or wipe gently.

8. Troubleshooting

9. Specifications

10. Warranty and Support

The SiOnyx Nightwave Camera comes with a manufacturer's warranty. For detailed warranty information, including terms and conditions, please refer to the warranty card included with your product or visit the official SiOnyx website. For technical support, troubleshooting assistance, or service inquiries, please contact SiOnyx customer support through their official channels.

Online Resources: www.sionyx.com