JIGOO T600 Anti-Mite Mattress Vacuum Cleaner User Manual

1. Introduction

Thank you for choosing the JIGOO T600 Anti-Mite Mattress Vacuum Cleaner. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your device. Please read it thoroughly before first use and keep it for future reference.

Image 1.1: The JIGOO T600 Anti-Mite Mattress Vacuum Cleaner, showcasing its sleek grey design and transparent dust bin.

2. Safety Instructions

To ensure safe operation, always adhere to the following precautions:

• Do not immerse the main unit in water or other liquids.
• Keep the appliance away from heat sources and direct sunlight.
• Do not use the vacuum cleaner on wet surfaces or to pick up liquids.
• Ensure the power cord is not damaged and avoid pulling it to unplug the device.
• This appliance is for household use only.
• Keep out of reach of children.
• The UV lamp emits ultraviolet light. Avoid direct exposure to eyes and skin. The UV light automatically turns off when lifted from the surface by more than 15 degrees for safety.

Image 2.1: Close-up of the JIGOO T600's UV light, illustrating its 800mW power and the automatic safety protection that turns off the UV light when tilted.

3. Product Features

The JIGOO T600 is designed for efficient and thorough cleaning of mattresses and upholstered surfaces. Key features include:

• High Power and Suction: Equipped with a 700W motor and 15kPa suction power to effectively remove dust mites and bed bugs.
• UV Sterilization: Features a 253.7nm UV lamp for deep sterilization, eliminating up to 99.9% of mites and bacteria.
• 60°C Hot Air System: Rapid heating to 60°C in 5 seconds helps to kill mites and dry surfaces, preventing moisture buildup.
• Dual Dust Bin Design: Independent dust bins for optimal filtration and easy disposal, ensuring hygienic cleaning.
• Silent Operation: Operates at a low noise level of 72dB for discreet use.
• LED Display: Provides real-time dust mite index and operational status for intelligent cleaning.
• Ultrasonic Sterilization: High-frequency ultrasonic waves disrupt the dust mite reproductive cycle.

Image 3.1: The JIGOO T600 demonstrating its 700W power and 15kPa suction, highlighting the metal brush roller for effective dust mite removal.

Image 3.2: Visual representation of the JIGOO T600's ability to reduce dust mite density by 99.99% through high-frequency ultrasonic waves, with a "Before" and "After" comparison.

Image 3.3: The JIGOO T600's LED display showing real-time dust mite index, indicating a high level before cleaning and a low level after cleaning.

4. Setup

The JIGOO T600 is designed for ease of use. Follow these steps for initial setup:

1. Unpacking: Carefully remove the vacuum cleaner and all accessories from the packaging. Retain packaging for future storage or transport.
2. Inspect Components: Verify that all components are present and undamaged. Refer to the packing list for details.
3. Power Connection: Plug the power cord into a suitable electrical outlet (220 Volts).

5. Operating Instructions

To operate your JIGOO T600, follow these steps:

1. Power On: Press the power button to turn on the vacuum cleaner. The LED display will illuminate.
2. Select Mode (if applicable): The device automatically adjusts based on the dust mite index. Observe the LED display for real-time feedback.
3. Cleaning Surfaces: Gently glide the vacuum cleaner over the mattress, sofa, or other upholstered surfaces. Ensure the UV lamp is in contact with the surface for effective sterilization.
4. UV Light Safety: The UV light will automatically turn off if the device is lifted or tilted more than 15 degrees from the surface. This is a safety feature to prevent direct UV exposure.
5. Power Off: Press the power button again to turn off the vacuum cleaner after use.

Image 5.1: The JIGOO T600 being used for multiple purposes, including cleaning mattresses, carpets, and sofas, demonstrating its versatility in a household setting.

6. Maintenance and Cleaning

Regular maintenance ensures optimal performance and extends the lifespan of your JIGOO T600. Always unplug the device before cleaning.

1. Emptying the Dust Bin:

   The JIGOO T600 features a dual dust bin design for easy disposal. To empty:

   • Press the release button to detach the dust bin assembly.
   • Separate the two dust bins and empty their contents into a waste receptacle.
2. Cleaning Filters:

   The device uses a HEPA filter and a stainless steel filter screen. For thorough cleaning:

   • Remove the HEPA filter and stainless steel filter screen from the dust bin assembly.
   • Rinse the filters under running water. Ensure they are completely dry before reinserting them into the vacuum cleaner.
   • Do not use detergents or abrasive cleaners on the filters.
3. Cleaning the Brush Roller:

   Periodically check the metal brush roller for tangled hair or debris. Remove any obstructions to maintain effective tapping and suction.
4. Cleaning the Main Unit:

   Wipe the exterior of the vacuum cleaner with a soft, damp cloth. Do not use harsh chemicals.

Image 6.1: Step-by-step guide on how to disassemble and clean the JIGOO T600, showing the removal of the dust bin, filters, and brush roller for washing.

Image 6.2: Diagram illustrating the JIGOO T600's filtration system, including the detachable dust cup, stainless steel filter screen, and static filter sponge, emphasizing easy disposal and up to 99.5% filtration efficiency.

7. Troubleshooting

If you encounter issues with your JIGOO T600, refer to the table below for common problems and solutions.

8. Specifications

9. Warranty and Support

For warranty information and customer support, please refer to the product packaging or contact JIGOO customer service directly. Keep your purchase receipt as proof of purchase.

Return Policy: The product typically comes with a 30-day return/replacement policy. Please check with your retailer for specific terms.

Manufacturer: JIGOO