1. Introduction
This instruction manual provides essential information for the safe and effective use of your CDCASA Dual Motor Lay Flat Lift Recliner Chair, Model PE206. Designed for comfort and ease of use, this chair features dual motors for independent backrest and footrest control, massage and heating functions, and a power lift mechanism to assist users with standing. Please read this manual thoroughly before assembly and operation.
2. Setup and Assembly
The recliner is delivered in two boxes and requires minimal assembly. Follow the numbered steps provided in the included detailed instruction guide. No additional tools are required, and installation typically takes 10-15 minutes.
2.1 Unpacking and Component Identification
Carefully unpack all components from the two boxes. Ensure all parts are present before beginning assembly.
2.2 Attaching Armrests
Align the metal guides on the armrests with the corresponding slots on the chair base. Gently slide the armrests into place until they securely click. Repeat for both sides.
2.3 Installing the Backrest
Carefully align the backrest with the metal brackets on the chair base. Slide the backrest down until it locks into position. Ensure it is firmly seated.
2.4 Connecting Wires and Power
Locate the various wires underneath the chair. Connect the color-coded wires for the massage and heating functions. Connect the lift remote control cable. Finally, connect the power adapter to the chair and then to a power outlet. Ensure all connections are secure.
2.5 Assembly Videos
3. Operating Instructions
Your CDCASA recliner offers multiple functions for personalized comfort, controlled via the included remote controls.
3.1 Dual Motor Functions (Recline and Lift)
The chair features dual OKIN motors, allowing independent adjustment of the backrest and footrest. Use the remote control to customize your position from 45° to 180°. The infinite position locking allows the chair to lay flat, suitable for sleeping or extended relaxation. The power lift function assists users in standing up easily.
3.2 Vibration Massage and Lumbar Heating
Activate the massage and heating functions using the dedicated remote control. The chair offers 8 massage points, 4 custom area settings (back, lumbar, thighs, legs), and 5 vibration modes. Lumbar heating provides additional comfort. A timed remote control allows you to set the duration of these functions.
3.3 USB and Type-C Charging Ports
Conveniently located on the side of the chair, integrated USB and Type-C ports allow you to charge your electronic devices while relaxing.
3.4 Operating Videos
4. Maintenance
Proper maintenance ensures the longevity and optimal performance of your recliner chair.
4.1 Cleaning Instructions
To clean the breathable faux leather upholstery, simply wipe it clean with a damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these may damage the material.
5. Troubleshooting
If you encounter any issues with your recliner, please refer to the following common troubleshooting tips:
- Chair not responding to remote: Ensure the power cord is securely plugged into both the chair and a working electrical outlet. Check that all internal wire connections are firm.
- Massage or heat not working: Verify that the massage and heating remote control is properly connected and powered on. Check the settings on the remote to ensure the desired functions are activated.
- Unusual noises during operation: Inspect the area underneath and around the chair for any obstructions that might be interfering with the motor or reclining mechanism. Ensure the chair is on a level surface.
6. Specifications
| Feature | Detail |
|---|---|
| Brand | CDCASA |
| Model Name | PE206 |
| Color | Grey |
| Product Dimensions | 37.4"D x 40.2"W x 41.7"H |
| Item Weight | 122 pounds |
| Maximum Weight Recommendation | 400 Pounds |
| Material | Wood, Alloy Steel, High Rebound Sponge, Breathable Faux Leather |
| Special Features | Dual OKIN Motors, Infinite Position, Reclining, Massage, Heated, Vibration, Side Pocket, Remote Control, Arm Rest, Ergonomics, Adjustable backrest, Adjustable footrest |
| Included Components | Chair x1, Remote Control x2 |
7. Safety Information
Please adhere to the following safety guidelines to prevent injury and ensure the proper functioning of your recliner:
- Always ensure the chair is on a stable surface.
- Do not exceed the maximum weight capacity of 400 pounds.
- Use the remote control to operate the lift and recline functions slowly and carefully.
- Keep fingers and other body parts away from moving parts of the mechanism.
- Unplug the chair when not in use or when leaving it unattended.
- Always follow the assembly instructions carefully to ensure the chair is properly assembled and stable.
8. Warranty and Support
Your CDCASA recliner chair comes with a 1-year technical support warranty for the lift motor and steel frame. This warranty covers manufacturing defects and ensures the core mechanical components are free from faults.
For any shipping damage upon arrival or defects encountered during usage, please contact our customer service team. We are committed to providing the best after-sales service to ensure your satisfaction.
Customer Service Contact: Please refer to your purchase documentation or the manufacturer's website for specific contact details.