Introduction
Thank you for choosing the CDCASA Dual Motor Lay Flat Lift Chair Recliner. This manual provides essential information for the safe and efficient operation, assembly, and maintenance of your new recliner. Please read it thoroughly before use and retain it for future reference.
Safety Instructions
Always follow basic safety precautions when operating electrical appliances to reduce the risk of burns, fire, electric shock, or injury to persons.
- Ensure all connections are secure before plugging into a power outlet.
- Keep children and pets away from the chair's moving parts.
- Do not allow more than one person to sit on the chair at a time.
- Avoid placing objects under or around the chair that could obstruct its movement.
- Unplug the chair from the power outlet before cleaning or performing any maintenance.
- Do not operate the chair if the power cord or plug is damaged.
- Do not expose the chair to water or excessive moisture.
Package Contents
Your CDCASA Dual Motor Lay Flat Lift Chair Recliner package includes the following items:
- 1 x Chair (delivered in 2 boxes)
- 2 x Remote Controls
Setup
The recliner is designed for super easy assembly, typically taking 10-15 minutes with no tools required. It arrives in two separate boxes.
- Unpack all components from both boxes.
- Align the backrest with the base and slide it into place until it clicks securely.
- Connect the power cables from the backrest to the base, ensuring a snug fit.
- Connect the remote control cable to the designated port.
- Plug the power adapter into a wall outlet.
For a visual guide on assembly and initial setup, please refer to the official product video below:
Operating Instructions
Your CDCASA recliner is equipped with dual OKIN motors and a user-friendly remote control for various functions.
Dual Motor Operation
The dual OKIN motors allow for independent control of the backrest and footrest. Use the remote control to adjust the chair to your desired position.
- Backrest Adjustment: The backrest can be adjusted from 100° (upright) to 180° (fully flat).
- Footrest Adjustment: The footrest can be adjusted from 90° (down) to 180° (fully extended).
- Infinite Position: The chair offers infinite position locking, allowing it to lay completely flat like a bed, suitable for sleeping.
Vibration Massage & Lumbar Heating
The electric recliner features an 8-point vibration massage system and lumbar heating for enhanced relaxation.
- Massage Points: 8 massage points target the back, lumbar, thighs, and legs.
- Custom Settings: Choose from 4 custom area settings and 5 vibration modes.
- Lumbar Heating: Activate the lumbar heating function for warmth and comfort.
- Timed Control: Use the remote control to set massage and heating durations.
Lift Assist Function
The lift assist function is particularly beneficial for seniors or individuals with limited mobility, providing assistance when standing up from the chair.
- Press the designated button on the remote control to gently lift the chair, tilting it forward to assist in standing.
- The chair can also be lowered smoothly back into a seated position.
Maintenance
Proper maintenance ensures the longevity and optimal performance of your recliner.
Cleaning
- For daily cleaning, wipe the breathable faux leather with a soft, damp cloth.
- Avoid using harsh chemicals or abrasive cleaners, as they may damage the material.
- For spills, blot immediately with a clean, dry cloth.
General Care
- Regularly check all connections and fasteners to ensure they are tight.
- Keep the chair away from direct sunlight and heat sources to prevent material degradation.
- Ensure the area around the chair is clear to allow for full range of motion.
Troubleshooting
If you encounter any issues with your recliner, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair does not operate | Power cord unplugged; Remote control not connected; Power outlet malfunction. | Check power cord connection; Ensure remote control cable is securely plugged in; Test power outlet with another device. |
| Motor makes unusual noise | Obstruction in mechanism; Loose components. | Inspect for obstructions under the chair; Check for loose screws or connections. |
| Massage/Heat not working | Connection issue; System overload. | Ensure all cables are properly connected; Unplug and replug the chair to reset. |
If the issue persists after attempting these solutions, please contact customer service for further assistance.
Specifications
| Feature | Detail |
|---|---|
| Brand | CDCASA |
| Model Name | PE206 |
| Color | Brown |
| Product Dimensions (D x W x H) | 37.4"D x 40.2"W x 41.7"H |
| Maximum Weight Recommendation | 400 Pounds |
| Reclining Position Count | Infinite Position (100° to 180° backrest, 90° to 180° footrest) |
| Special Features | Dual OKIN Motors, Massage (8-point vibration), Lumbar Heating, Lift Assist, Side Pockets, Remote Control |
| Fill Material | High-Density 26D Foam |
| Upholstery Material | Breathable Faux Leather |
| Frame Material | Sturdy Steel Frame |
| Item Weight | 122 pounds |
| Included Components | Chair, 2 Remote Controls |
Warranty and Support
CDCASA provides comprehensive support for your product:
- Warranty: We offer 1 year technical support for the lift motor and steel frame.
- Customer Service: If you experience any shipping damage upon arrival or encounter defects during usage, please do not hesitate to contact us. We are committed to providing the best after-sales service to ensure your satisfaction.
For assistance, please refer to the contact information provided with your purchase or visit the official CDCASA store online.