JOINLGO V80-4GW 4-Channel Vehicle Truck DVR System

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your JOINLGO V80-4GW 4-Channel Vehicle Truck DVR System. This system is designed for fleet management and vehicle surveillance, offering 1080P video recording, GPS tracking, 4G/WiFi connectivity, and remote viewing capabilities.

Figure 1: Overview of the JOINLGO V80-4GW DVR System components.

Package Contents

Verify that all items listed below are present in your package:

• Mobile DVR Unit (1)
• 7" IPS VGA Screen (1)
• Side IR Camera (2)
• Rear IR Camera (1)
• Front IR Camera (1)
• 1TB SSD (1)
• Power Cable (1)
• Adapter Alarm Cable (1)
• WiFi Antenna (1)
• GPS Antenna (3m) (1)
• Key (1)
• Remote Controller (1)
• Remote Extension Cable (1.5m) (1)
• User Manual (1)
• Warranty Card (1)
• 5m (16ft) Camera Cable (1)
• 10m (33ft) Camera Cable (2)
• 15m (50ft) Camera Cable (1)

Figure 2: Visual representation of the included components.

Setup and Installation

1. DVR Unit Installation

Mount the DVR unit securely in a suitable location within the vehicle, ensuring it is protected from excessive vibration and moisture. The aluminum die-cast chassis is designed for durability in various environments.

2. SSD Installation

The system includes a 1TB SSD for storage. Insert the SSD into the designated slot on the DVR unit. Ensure it is properly seated to enable recording functionality.

3. Camera Installation

Install the four cameras (two side, one rear, one front) in their respective positions on the vehicle. The cameras are IP68 waterproof and feature IR LEDs for night vision. Use the provided cables to connect each camera to the DVR unit via the specialized 4-pin aviation connectors.

• Side Cameras: Mount on the sides of the vehicle for blind spot monitoring.
• Rear Camera: Mount at the rear for reverse assistance and rear surveillance.
• Front Camera: Mount at the front for forward-facing recording.

Figure 3: Recommended camera placement for comprehensive vehicle coverage.

Refer to the 4-PIN port definition for correct wiring:

Figure 4: 4-PIN connector definition for camera wiring.

4. Monitor Connection

Connect the 7-inch IPS monitor to the DVR unit using the appropriate VGA or HDMI cable. The monitor provides a 1024x600 resolution display for live view and playback.

5. Power and Accessory Connections

Connect the power cable to the DVR unit and the vehicle's power source. Attach the WiFi and GPS antennas to their respective ports on the DVR. The GPS module enables precise vehicle positioning and location recording in video streams.

Figure 5: DVR unit interface and connection points.

Operation

1. Basic Recording

The DVR system supports 4-channel 1920x1080 @30fps real-time recording. It operates on a loop recording principle, continuously recording and overwriting the oldest footage when the storage is full. The included 1TB SSD provides ample storage capacity.

Figure 6: Enhanced recording performance with 30fps and H.265 coding.

2. G-Sensor Functionality

The built-in G-sensor detects sudden movements such as hard acceleration, abrupt braking, speeding, and impacts. In such events, the system automatically saves and locks the relevant footage to prevent it from being overwritten.

3. Remote Live View and Tracking

Utilize the 4G and Wi-Fi modules for data transmission, enabling remote live viewing on PC, web browsers, and iOS/Android smartphones. The built-in GPS module records location information, allowing for playback of vehicle tracks and comprehensive fleet management.

Figure 7: Remote monitoring and data management interfaces.

4. Motion Detection

The system supports motion detection with customizable alarm times and detection areas. When motion is detected, the system can trigger an alarm, lock video footage, send app push notifications, and generate alarm reports. This feature is active when the engine is off.

Figure 8: Intelligent alarm processes including motion detection.

5. 4-Channel Alarm Input

The DVR supports four trigger inputs. Upon activation of a trigger, the system can automatically switch to a full-screen display of the relevant camera and lock the footage.

6. Delay Record

The system can continue recording for up to 24 hours after the vehicle's engine is shut down, drawing power from the vehicle's battery. Additionally, built-in capacitors provide an 8-second backup recording in case of immediate power loss.

7. Geo Fence

Set up geographical boundaries (geo-fences) and receive alerts if the vehicle deviates from the defined routes or enters/exits specified areas.

8. Mirror Image and Multi-mode Display

The system supports horizontal and vertical image flipping for any camera channel via the menu, allowing for flexible camera mounting. Multiple display modes are available for viewing camera feeds simultaneously on the monitor.

Figure 9: Image flip and multi-view display options.

9. USB Functionality

The USB port allows for backing up video footage or connecting a mouse for easier navigation of the DVR's graphical user interface (GUI).

10. Remote Control

Use the included remote controller and extended remote receiver to operate the DVR system conveniently without direct access to the unit.

Figure 10: Remote control and receiver for convenient operation.

Maintenance

1. DVR Unit Care

The DVR unit features an aluminum die-cast chassis with a fanless design, making it adaptable to various working environments. Keep the unit free from dust and ensure proper ventilation around its mounting location.

2. Camera Care

The cameras are IP68 waterproof and constructed with full metal for durability. Regularly clean the camera lenses to ensure clear image quality. Avoid using abrasive materials that could scratch the lens.

3. Storage Management

The system utilizes loop recording, automatically managing storage space. Periodically review recorded footage and back up any critical events via the USB port to an external storage device.

Troubleshooting

If you encounter issues with your JOINLGO V80-4GW DVR system, please refer to the following common troubleshooting steps:

• No Power: Ensure all power connections are secure and the vehicle's battery has sufficient charge. Check fuses if applicable.
• No Video Display: Verify that cameras are properly connected to the DVR and the monitor is correctly connected to the DVR via VGA or HDMI. Check cable integrity.
• Recording Issues: Confirm the SSD is correctly installed and has sufficient space (though loop recording manages this automatically, a faulty SSD could cause issues).
• GPS/4G/WiFi Connectivity Problems: Ensure antennas are securely attached and positioned for optimal signal reception. Check network settings on the DVR and your mobile device/PC.
• Remote Access Failure: Verify internet connectivity for both the DVR (via 4G/WiFi) and your remote viewing device. Ensure correct login credentials for the app/web platform.
• Image Quality Issues: Clean camera lenses. Check for physical damage to cameras or cables.

For further assistance, please contact JOINLGO customer support.

Specifications

Figure 11: Dimensions of the 7-inch IPS monitor.

Figure 12: SONY sensor and WDR technology for optimal image clarity.

Warranty Information

The JOINLGO V80-4GW DVR System comes with a 2-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.

For detailed warranty terms and conditions, please refer to the included Warranty Card.

Customer Support

If you require technical assistance, have questions about installation, or need to report a product issue, please contact JOINLGO customer support.

Please visit the official JOINLGO website or refer to the contact information provided on your Warranty Card for the most up-to-date support channels.