1. Introduction
This manual provides essential instructions for the safe and efficient use of your Baseus Qpow2 10000mAh 22.5W Dual-Cable Fast Charge Power Bank. Please read this manual thoroughly before operating the device and retain it for future reference.
Product Features:
- Integrated Type-C and Lightning charging cables for convenience.
- 22.5W fast charging capability.
- Ability to charge up to four devices simultaneously.
- Portable lanyard-cable design for easy carrying.
- Digital LED display for real-time battery status.
- Advanced safety charging mechanisms.
- Approved for international travel on major airlines.
2. Product Overview
Familiarize yourself with the components of your Baseus Qpow2 Power Bank.
Image 2.1: Front view of the Baseus Qpow2 Power Bank, showcasing the digital display and integrated cables.
Components:
- Digital Display: Shows remaining battery percentage.
- Built-in Type-C Cable: For charging compatible Android devices and the power bank itself.
- Built-in Lightning Cable: For charging Apple devices.
- USB-C Port: Input/Output for charging devices or recharging the power bank.
- USB-A Port: Output for charging devices.
- Power Button: Activates the display and initiates charging.
- Lanyard: Integrated into the Type-C cable for portability.
Image 2.2: Illustration of the four available charging outputs on the power bank.
3. Setup and Initial Use
3.1 Initial Charging of the Power Bank
- Before first use, fully charge your Baseus Qpow2 Power Bank.
- Connect the built-in Type-C cable or a separate USB-C cable to the power bank's USB-C port.
- Connect the other end of the cable to a compatible USB wall charger (not included).
- The digital display will show the charging progress. The power bank is fully charged when the display shows "100%".
Image 3.1: Recharging the power bank using the two-way USB-C port.
4. Operating Instructions
4.1 Charging Your Devices
The Baseus Qpow2 Power Bank offers multiple ways to charge your electronic devices.
- Using Built-in Cables:
- Pull out the integrated Type-C or Lightning cable from its storage slot.
- Connect the appropriate cable directly to your device's charging port.
- Charging will begin automatically. If not, press the power button once.
- Using USB-A or USB-C Ports:
- Use your device's original charging cable.
- Connect one end of the cable to your device and the other end to either the USB-A or USB-C output port on the power bank.
- Press the power button once to initiate charging.
Image 4.1: Charging two devices simultaneously using the integrated cables.
4.2 Digital Display
The digital display shows the current battery percentage of the power bank. It activates when the power button is pressed or when a device is connected for charging.
4.3 Simultaneous Charging
The power bank supports charging up to four devices concurrently using a combination of its built-in cables and USB ports. Note that total output power will be distributed among connected devices.
5. Maintenance and Care
- Cleaning: Use a soft, dry cloth to clean the power bank. Avoid liquid cleaners, aerosols, or solvents.
- Storage: Store the power bank in a cool, dry place away from direct sunlight, extreme temperatures, and humidity.
- Battery Care: To prolong battery life, fully charge the power bank at least once every three months if not in regular use. Avoid fully discharging the battery frequently.
- Handling: Do not drop, disassemble, or attempt to repair the power bank yourself. This may void the warranty and cause damage.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Power bank not charging devices. | Low battery on power bank; cable not connected properly; device incompatible. | Recharge power bank; ensure cables are securely connected; verify device compatibility. |
| Power bank not recharging. | Charging cable or adapter faulty; power bank port damaged. | Try a different charging cable and wall adapter; contact support if issue persists. |
| Slow charging. | Using a non-fast charging adapter; multiple devices connected; cable quality. | Use a fast-charging wall adapter; disconnect other devices; use original or high-quality cables. |
| Digital display not working. | Power bank is off; internal malfunction. | Press the power button; if still unresponsive, contact customer support. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | LFZ107 |
| Battery Capacity | 10000mAh |
| Max Output Power | 22.5W |
| Input (USB-C) | 18W (Max) |
| Output (USB-C) | 20W (Max) |
| Built-in Cables | 1x Type-C, 1x Lightning |
| Additional Ports | 1x USB-A Output, 1x USB-C Input/Output |
| Product Dimensions | 13.8 x 9 x 2 cm |
| Item Weight | 245 g |
| Special Features | Built-in cables, compact, digital display, fast charging, pocket size |
| Country of Origin | China |
8. Safety Information
- Do not expose the power bank to water, moisture, or extreme temperatures.
- Avoid dropping or subjecting the device to strong impacts.
- Keep out of reach of children.
- Do not attempt to disassemble, open, or repair the power bank.
- Dispose of the power bank responsibly according to local regulations. Do not dispose of it in household waste.
- Use only certified charging cables and adapters.
9. Warranty and Support
Your Baseus Qpow2 Power Bank comes with a standard manufacturer's warranty. An optional 1-year extended warranty may be available for purchase.
For technical support, warranty claims, or further assistance, please contact the authorized distributor:
MP International - Authorized Distributor
Phone: +91-8369646880
Please have your product model number (LFZ107) and proof of purchase ready when contacting support.