1. Introduction
The GE Ultra Bright LED Light Bulbs provide a bright and crisp soft white light, designed for various indoor and outdoor applications. These energy-efficient bulbs offer broad beams of dimmable light and are built for longevity, reducing the need for frequent replacements. They are a safer and more convenient alternative to traditional lighting options, providing instant full brightness without harmful materials.
2. Safety Information
- Risk of Electric Shock: Always turn off power to the fixture before installing, removing, or inspecting the bulb.
- Do Not Disassemble: Do not attempt to disassemble or modify the bulb. There are no user-serviceable parts inside.
- Operating Temperature: Ensure the bulb is used within its specified operating temperature range.
- Dimmer Compatibility: Use only with compatible dimmer switches. Refer to the dimmer manufacturer's instructions for compatibility.
- Fixture Compatibility: These bulbs are designed for E26 Medium Base fixtures. Verify your fixture's base type before installation.
- Enclosed Fixtures: Caution: These luminaries are not for use in totally enclosed or recessed luminaries. Using them in such fixtures may lead to premature failure or safety hazards.
- Wet Rated: These bulbs are wet-rated, making them suitable for outdoor use in appropriate fixtures.
3. Setup & Installation
- Power Off: Before beginning installation, ensure the power to the light fixture is turned off at the circuit breaker or wall switch.
- Remove Old Bulb: Carefully unscrew the existing light bulb from the fixture. Allow it to cool if it has been recently in use.
- Insert New Bulb: Gently screw the GE Ultra Bright LED bulb into the E26 Medium Base socket until it is snug. Do not overtighten.
- Power On: Restore power to the fixture.
- Test: Turn on the light switch to confirm proper operation.
The GE Ultra Bright LED bulbs are designed for easy installation into standard E26 medium base fixtures. Their CA12 shape is ideal for decorative applications, including chandeliers and outdoor lanterns.
4. Operation
- Instant Brightness: GE LED bulbs provide instant full brightness upon activation, with no warm-up time required.
- Dimmable Functionality: These bulbs are dimmable and compatible with most standard dimmer switches. Adjust the dimmer to achieve your desired light level.
- Soft White Light: Emitting a 2700 Kelvin color temperature, these bulbs produce a warm, soft white light, ideal for creating a comfortable and inviting atmosphere.
- High Brightness: Each 8W bulb delivers 1080 lumens, providing significant illumination equivalent to a 100-watt incandescent bulb.
5. Maintenance
- Cleaning: Ensure the power is off and the bulb is cool before cleaning. Wipe with a soft, dry cloth. Do not use liquid cleaners.
- Longevity: These LED bulbs are designed for a long lifespan of approximately 15,000 hours, or 13.7 years based on 3 hours of daily use. This significantly reduces maintenance and replacement frequency.
- Energy Efficiency: With a power consumption of only 8 watts, these bulbs are highly energy-efficient, contributing to lower electricity costs.
- Mercury-Free: Unlike CFL bulbs, GE LED bulbs do not contain mercury, simplifying disposal.
Video 1: "LED Energy Savings" by Savant Technologies LLC. This video explains the energy-saving benefits, longevity, and mercury-free nature of GE LED bulbs, along with their instant-on feature and various color temperatures.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bulb does not light up. | No power to fixture, loose connection, or faulty bulb. | Check power supply, ensure bulb is screwed in tightly, or replace bulb. |
| Bulb flickers. | Incompatible dimmer switch, loose connection, or fixture issue. | Ensure dimmer is LED-compatible. Tighten bulb. If flickering persists, consult an electrician. Some flickering may occur briefly upon initial turn-on. |
| Premature bulb failure. | Overheating due to use in enclosed fixtures, voltage fluctuations. | Ensure bulbs are not used in totally enclosed or recessed luminaries. Verify stable voltage supply. |
7. Specifications
| Feature | Detail |
|---|---|
| Brand | GE |
| Model Number | 93130037 |
| Light Type | LED |
| Special Features | Dimmable, Energy Efficient, Wet Rated |
| Wattage | 8 Watts |
| Incandescent Equivalent | 100 Watts |
| Bulb Shape Size | CA12 |
| Bulb Base | E26 Medium |
| Light Color | Soft White |
| Color Temperature | 2700 Kelvin |
| Brightness | 1080 Lumens |
| Voltage | 120 Volts |
| Average Life | 15,000 Hours (13.7 years) |
| Material | Glass |
| Indoor/Outdoor Usage | Outdoor |
| Unit Count | 3 Bulbs per pack |
| Item Weight | 3.52 ounces |
| Product Dimensions | 6.02 x 5.16 x 1.85 inches |
8. Warranty
The GE Ultra Bright LED Light Bulbs come with a 5-year limited warranty. For specific terms and conditions, please refer to the warranty documentation included with your product or contact GE Lighting customer support.
9. Customer Support
For further assistance, technical support, or warranty claims, please contact GE Lighting, a Savant Company. You can find more information and contact details on the official GE Lighting website or through your product's documentation.
Manufacturer: GE Lighting (a Savant Company)
Online Store: Visit the GE Store on Amazon
