1. Introduction
Thank you for choosing the BoxWave AccuPoint Active Stylus. This electronic stylus is designed to provide a natural and precise writing experience on your compatible touchscreen devices, specifically the Teclast M40 Pro. It requires no pairing, allowing for immediate use by simply pressing the power button. The stylus emits quick electronic pulses to interact seamlessly with your screen, enabling accurate tapping, swiping, and drawing.
Image: The BoxWave AccuPoint Active Stylus shown alongside a Teclast M40 Pro tablet, illustrating its compatibility and sleek design.
2. Product Overview
The AccuPoint Active Stylus features a robust design and advanced functionality for enhanced interaction with your device.
- Ultra Fine Tip: Equipped with an ultra-accurate 2mm tip for precise input, mimicking the feel of a real pen.
- Dual Functionality: Includes both the active 1.9mm fine tip and a removable FiberMesh tip for versatile use.
- Long Battery Life: A built-in battery provides approximately 12 hours of continuous use on a single charge.
- Durable Construction: Crafted with a solid brushed aluminum barrel for strength, stability, and a comfortable grip.
- No Bluetooth Required: Operates without the need for Bluetooth pairing, simplifying setup.
- Convenient Charging: Recharges via an included MicroUSB cable.
Image: A detailed diagram highlighting key features of the stylus, including the built-in charging port, indicator light, 1.9mm extra fine tip, FiberMesh tip, and confirmation that no Bluetooth is required.
Image: The stylus shown next to a device, emphasizing its slim 9mm brushed aluminum profile and ergonomic design.
3. Setup
Setting up your BoxWave AccuPoint Active Stylus is straightforward:
- Initial Charge: Before first use, fully charge the stylus using the provided MicroUSB cable. Connect the cable to the stylus's charging port and plug the other end into any standard USB power source (e.g., computer USB port, wall adapter). The indicator light will show charging status.
- Power On: Press the power button located on the stylus barrel. The indicator light will illuminate, signifying the stylus is active and ready for use.
- No Pairing: The AccuPoint Active Stylus does not require Bluetooth pairing. It is ready to interact with your touchscreen device immediately after being powered on.
Image: The stylus being charged via its MicroUSB cable connected to a laptop, demonstrating the convenient charging method.
4. Operating Instructions
Using your AccuPoint Active Stylus is intuitive:
- General Use: Hold the stylus like a traditional pen. Gently tap, swipe, or draw on your device's screen. The stylus's electronic pulses will accurately register your input.
- Precision Tasks: For detailed work such as drawing, fine-tuning images, or precise text selection, utilize the ultra-fine tip.
- Navigation: Use the stylus for general navigation, opening apps, scrolling, and interacting with user interfaces.
- Natural Writing: The stylus is designed to allow for natural writing positions, providing comfort during extended use.
Image: A hand holding the stylus and interacting with application icons on a tablet screen, demonstrating its use for precise input.
Image: A person holding the stylus and a smartphone, illustrating its versatility for use with smaller touchscreen devices.
5. Maintenance
To ensure the longevity and optimal performance of your stylus, follow these maintenance guidelines:
- Charging: Recharge the stylus when the indicator light signals low battery. A full charge provides up to 12 hours of use. Avoid overcharging for extended periods.
- Cleaning: Wipe the stylus barrel with a soft, dry cloth to remove dust or smudges. For the tips, use a slightly damp, lint-free cloth if necessary, ensuring no moisture enters the stylus body.
- Storage: Store the stylus in a clean, dry place away from extreme temperatures and direct sunlight.
- Tip Care: Handle the fine tip with care to prevent bending or damage. The FiberMesh tip is removable and can be replaced if worn.
Image: An illustration showing the indicator light colors for power on (blue), charging (red), and full charge (green), aiding in battery management.
6. Troubleshooting
If you encounter issues with your AccuPoint Active Stylus, consider the following:
| Problem | Possible Cause | Solution |
|---|---|---|
| Stylus not responding | Stylus is off or battery is depleted. | Press the power button to turn it on. If it doesn't turn on, charge the stylus fully. |
| Inaccurate input | Tip may be dirty or damaged. | Clean the tip gently. If the tip is visibly damaged, consider replacing the FiberMesh tip or contacting support for the fine tip. |
| Stylus not recognized by device | Device screen may be dirty or have a protective film interfering with conductivity. | Ensure your device screen is clean. Remove any screen protectors that are not stylus-compatible. |
| No Palm Rejection/Pressure Sensitivity | This feature is not supported by the stylus. | The AccuPoint Active Stylus does not support palm rejection or pressure sensitivity. This is normal operation. |
7. Specifications
- Model Name: AccuPoint Active Stylus
- Color: Metallic Silver
- Tip Size: 2mm (Ultra Fine Tip)
- Battery Life: Approximately 12 hours of continuous use
- Charging Port: MicroUSB
- Material: Solid brushed aluminum barrel
- Weight: 1.3 ounces
- Batteries: 1 Product Specific battery required (included)
Image: A visual representation of the stylus highlighting its protected charging port, 9mm fingerprint-proof brushed aluminum body, 1.9mm tip, removable FiberMesh tip, easy-on LED button and power indicator, and the fact that no pairing is required.
8. Warranty and Support
For information regarding product warranty, returns, or technical support, please refer to the official BoxWave website or contact BoxWave Corporation directly. Details are typically available on the product packaging or the manufacturer's official online resources.
Manufacturer: BoxWave Corporation
