Introduction
This manual provides essential instructions for the safe installation, operation, and maintenance of your EGLO Salvilanas Integrated LED Ceiling Light. Please read this manual thoroughly before installation and retain it for future reference.
The EGLO Salvilanas light features an integrated LED, a black finish, and a white diffuser, designed for indoor use in various rooms such as kitchens, dining rooms, bedrooms, and hallways. It can be mounted on ceilings or walls.
Safety Information
- WARNING: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing.
- All wiring connections must be in accordance with local and national electrical codes. If you are unfamiliar with proper electrical wiring, consult a qualified electrician.
- Do not install this fixture in wet locations. It is designed for indoor use only and is not water resistant.
- Ensure the mounting surface can support the weight of the fixture.
- Do not attempt to modify the integrated LED components.
- Keep packaging materials away from children.
Package Contents
Verify that all components are present before beginning installation:
- EGLO Salvilanas Integrated LED Ceiling Light fixture (1)
- White plastic diffuser (1)
- Mounting hardware kit (screws, wire nuts, etc.) (1 set)
- Instruction Manual (1)
Setup and Installation
This fixture is designed for semi-flush mount installation on ceilings or walls.
1. Preparation
- Turn off power at the main circuit breaker or fuse box.
- Carefully unpack the fixture and its components. Keep all parts organized.
- Identify the mounting location. Ensure it is a dry, indoor area and the electrical box is securely mounted.
2. Mounting the Fixture
Refer to the diagram below for general mounting steps. Specific hardware may vary.
Image: The EGLO Salvilanas Integrated LED Ceiling Light, demonstrating its sleek design suitable for ceiling or wall mounting.
- Attach the mounting bracket (if separate) to the electrical junction box using the provided screws.
- Connect the electrical wires:
- Connect the black wire from the fixture to the black (live) wire from the junction box.
- Connect the white wire from the fixture to the white (neutral) wire from the junction box.
- Connect the ground wire from the fixture to the ground wire from the junction box.
- Secure all connections with wire nuts and electrical tape.
- Carefully tuck all wires into the junction box.
- Align the fixture with the mounting bracket and secure it using the provided screws or twist-lock mechanism.
- Install the white plastic diffuser onto the fixture according to its design (e.g., twist-lock, clips).
3. Final Steps
- Restore power at the circuit breaker.
- Test the light fixture.
Operating Instructions
The EGLO Salvilanas LED Ceiling Light is designed for easy operation.
- Power On/Off: The light can be controlled via a wall switch connected to the fixture's power supply.
- Control Methods: This fixture supports control via a remote control and a compatible app. Refer to the separate instructions provided with your remote control or app for pairing and advanced features.
- Light Color: The integrated LED provides a warm white light.
Maintenance
To ensure the longevity and appearance of your EGLO Salvilanas LED Ceiling Light, follow these simple maintenance guidelines:
- Cleaning: Disconnect power before cleaning. Use a soft, dry, or slightly damp cloth to wipe the exterior surfaces. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or diffuser.
- LED Components: The integrated LED light source is designed for long-term use and is not user-replaceable. Do not attempt to open or service the LED module.
- Diffuser Care: Handle the white plastic diffuser with care to avoid scratches or damage.
Troubleshooting
If you experience issues with your light fixture, try the following solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. Loose wiring connection. Faulty wall switch. | Check circuit breaker. Verify all wire connections are secure (with power off). Test wall switch or replace if necessary. |
| Light flickers. | Loose wiring. Incompatible dimmer switch (if applicable). | Check wiring connections (with power off). Ensure any dimmer switch is LED-compatible. |
| Remote control/App not working. | Batteries dead. Not paired correctly. Signal interference. | Replace remote batteries. Refer to remote/app instructions for pairing. Ensure no obstructions or strong interference sources. |
If these steps do not resolve the issue, contact customer support.
Specifications
| Brand: | EGLO |
| Model Number: | 206019A |
| Light Source: | Integrated LED |
| Wattage: | 21 watts |
| Brightness: | 2850 lumen |
| Efficiency: | 135.71 lumens/watt |
| Light Color: | Warm White |
| Voltage: | 12 Volts (DC) |
| Material: | Alloy Steel, Metal (fixture), Plastic (shade) |
| Finish: | Black (fixture), White (diffuser) |
| Dimensions (L x W x H): | 30.32" x 8" x 1.5" |
| Item Weight: | 5 Pounds |
| Installation Type: | Semi Flush Mount |
| Control Method: | App, Remote Control |
| Indoor/Outdoor Usage: | Indoor |
| Water Resistance Level: | Not Water Resistant |
Warranty
This EGLO product is covered by a 1-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modifications. Please retain your proof of purchase for warranty claims.
Support
For further assistance, technical support, or warranty inquiries, please refer to the contact information provided with your product packaging or visit the official EGLO website. When contacting support, please have your model number (206019A) and proof of purchase readily available.
