Nerf MXXIV-1200

Nerf Rival Challenger MXXIV-1200 Motorized Blaster Instruction Manual

Model: MXXIV-1200

Introduction

This manual provides essential information for the safe and effective operation of your Nerf Rival Challenger MXXIV-1200 Motorized Blaster. Please read all instructions carefully before use.

Safety Information

WARNING: Small parts may be generated. Not for children under 3 years.

Eyewear is recommended (not included) for all users and bystanders. Do not aim at eyes or face. Use only official Nerf Rival rounds. Other rounds may not be safe. Do not modify the blaster or rounds.

What's in the Box

  • Nerf Rival Challenger MXXIV-1200 Blaster
  • Curved 12-Round Magazine
  • 18 Nerf Rival Accu-Rounds
  • Instruction Manual

Setup

1. Battery Installation

The Nerf Rival Challenger MXXIV-1200 requires 8 AA batteries (not included). To install batteries:

  1. Locate the battery compartment on the blaster.
  2. Using a Phillips head screwdriver, unscrew the battery compartment cover.
  3. Insert 8 AA batteries, ensuring correct polarity (+/-).
  4. Replace the battery compartment cover and secure it with the screw.

2. Loading the Magazine

The blaster uses a curved 12-round magazine and comes with 18 Nerf Rival Accu-Rounds. Accu-Rounds feature an improved aerodynamic design for consistent flight.

  1. Hold the curved magazine.
  2. Insert the Nerf Rival Accu-Rounds into the top opening of the magazine, pushing them down against the spring.
  3. Ensure all rounds are seated correctly and the magazine is not overfilled.

A hand loading blue Nerf Rival Accu-Rounds into the orange curved magazine of the Nerf Rival Challenger MXXIV-1200 blaster.Image: Loading the curved magazine with Nerf Rival Accu-Rounds.

3. Attaching the Magazine

Once loaded, insert the magazine into the blaster's magazine well until it clicks securely into place.

The fully assembled Nerf Rival Challenger MXXIV-1200 Motorized Blaster with its curved orange magazine and 18 blue Accu-Rounds displayed next to it.Image: The Nerf Rival Challenger MXXIV-1200 Blaster with magazine and rounds.

Operating Instructions

1. Powering On and Firing

  1. Ensure the magazine is loaded and securely inserted.
  2. Press and hold the rev trigger (located below the main trigger) to power up the motor. You will hear the motor spinning.
  3. While holding the rev trigger, pull the main firing trigger to unleash one Nerf Rival Accu-Round at a time.

2. Trigger Lock

The blaster features a trigger lock for safety. Engage the trigger lock when the blaster is not in use to prevent accidental firing.

3. Tactical Rails and Carabiner Clip

The blaster includes tactical rails for customizing with Nerf accessories (not included) and a spring-loaded carabiner clip to attach the blaster to belt loops or backpacks.

Close-up of the Nerf Rival Challenger MXXIV-1200 blaster highlighting the trigger lock, tactical rails, and carabiner clip.Image: Key features of the Nerf Rival Challenger MXXIV-1200.

A person holding the Nerf Rival Challenger MXXIV-1200 blaster, demonstrating its ergonomic design and size.Image: Nerf Rival Challenger MXXIV-1200 in hand.

4. Official Product Video

Watch this video for a demonstration of the Nerf Rival Challenger MXXIV-1200's features and operation.

Video: Official overview of the Nerf Rival Challenger MXXIV-1200, demonstrating loading, firing, and key features.

Maintenance

1. General Care

  • Keep the blaster clean and free from dirt or debris.
  • Store the blaster in a dry place away from extreme temperatures.
  • Remove batteries when storing for extended periods to prevent corrosion.

2. Cleaning

Wipe the blaster with a damp cloth as needed. Do not submerge the blaster in water or use harsh chemicals.

3. Round Compatibility

The magazine is compatible with most standard Nerf Rival magazine-fed blasters. However, some older Nerf Rival magazines may not be fully compatible with the Challenger MXXIV-1200 due to design changes in the magazine retention mechanism. Always use official Nerf Rival Accu-Rounds for optimal performance and safety.

Troubleshooting

  • Blaster Not Firing:
    • Check if batteries are correctly installed and have sufficient charge. Replace if necessary.
    • Ensure the rev trigger is fully pressed and held before pulling the firing trigger.
    • Verify the trigger lock is disengaged.
    • Confirm the magazine is securely inserted and loaded with rounds.
  • Rounds Not Feeding:
    • Check if the magazine is properly loaded and inserted.
    • Ensure only official Nerf Rival Accu-Rounds are used. Damaged or unofficial rounds may cause feeding issues.
    • Inspect the magazine for any obstructions or damage.
  • Motor Issues:
    • If the motor does not rev up or sounds weak, replace the batteries.
    • If issues persist after replacing batteries, contact customer support.

Specifications

Product Dimensions2.63 x 16 x 10.5 inches
Item Weight2.46 pounds
Item Model NumberF8442
Manufacturer Recommended Age14 years and up
Batteries Required8 AA batteries
Release DateJanuary 15, 2024
ManufacturerHasbro

Warranty and Support

For warranty information, product support, or to purchase additional accessories and official Nerf Rival rounds, please visit the official Hasbro website or contact their customer service department. Keep your proof of purchase for any warranty claims.

You can also visit the Nerf Store on Amazon for more products and information.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.