Product Overview
The MSI MAG CORELIQUID E360 White is an All-in-One (AIO) ARGB CPU Liquid Cooler designed for efficient heat dissipation from your processor. It features a 360mm radiator, triple 120mm ARGB PWM fans, and a unique rotating cap design for aesthetic customization. This cooler is compatible with various Intel (LGA1150/1151/1155/1156/1200, LGA1366, LGA2011, LGA2011-3, LGA2066, LGA1700/1851) and AMD (AM4, FM2+, FM2, FM1, AM3+, AM3, AM2+, AM2) sockets.
Figure 1: Overview of the MSI MAG CoreLiquid E360 White AIO CPU Liquid Cooler, showcasing the radiator, three ARGB fans, and the pump with its rotating cap.
Key Features
- TIMELESS RELIABILITY: The motor ceramic bearing is engineered for a 100,000-hour lifespan, ensuring long-term durability.
- TOTAL ARGB FAN CONTROL: Included RGB fans support custom speed via PWM fan control and customizable lighting through software.
- RADIATOR PUMP DESIGN: The pump is integrated into the radiator, contributing to sound dampening and noise reduction.
- FULL CPU COVERAGE: Enlarged contact area between the coolant and the copper base of the water block maximizes heat dissipation.
- PUMP COOLING DESIGN: Ensures optimal cooled water temperature delivery to the heat source, effectively reducing its temperature.
- PUMP MOTOR RESONANCE ELIMINATION: A durable three-phase motor minimizes vibrations for stable operation.
- EVAPORATION PROOF TUBING: Multi-layer structure prevents liquid evaporation, reinforced with mesh plastic tube for enhanced durability.
- FAN CONSTRUCTION: Features FDB bearing for noise reduction and low impurity acrylic blades for better ARGB lighting.
What's in the Box
The MSI MAG CoreLiquid E360 White package includes:
- 1x MAG CORELIQUID E360 WHITE Liquid Cooler
- 3x 120mm ARGB PWM Fans
- Mounting hardware for Intel and AMD sockets
- Thermal paste
- Cables and accessories for installation
Figure 2: All components included in the MSI MAG CoreLiquid E360 White retail package, laid out for inspection.
Setup and Installation Guide
Follow these steps for proper installation of your MSI MAG CoreLiquid E360 White AIO CPU Liquid Cooler.
1. Prepare the Motherboard and CPU
Ensure your motherboard is compatible with the cooler. Identify the correct mounting brackets for your CPU socket (Intel LGA 1700/1851 / AM5/AM4 Compatible). Carefully unbox your CPU and motherboard.
Video 1: A detailed guide on preparing your motherboard and CPU for cooler installation, including CPU placement and initial setup steps.
2. Install the CPU and NVMe Drive
Align the CPU correctly with the socket on the motherboard, paying attention to the arrow indicators. Gently place the CPU into the socket and secure it with the retention arm. If installing an NVMe drive, locate the M.2 slot and secure the drive with the provided screw.
Figure 3: Illustration of CPU socket compatibility for both AMD (AM5, AM4, TR4, sTRX4) and Intel (LGA 1700, LGA 1200, LGA 1150, 1151, 1155, 1156) platforms.
3. Install RAM Modules
Open the retention clips on the RAM slots. Align the RAM modules with the slots, ensuring the notch on the module matches the key in the slot. Press firmly on both ends until the clips snap into place. For dual-channel performance, refer to your motherboard manual for optimal slot configuration (typically slots 2 and 4).
4. Mount the AIO Backplate and Standoffs
Attach the appropriate backplate to the rear of the motherboard, aligning it with the CPU socket holes. Secure the standoffs through the motherboard from the front side. These standoffs will provide the mounting points for the cooler's pump block.
Figure 4: The rotatable blockhead design of the AIO cooler, allowing for flexible mounting orientation while keeping the MSI logo upright.
5. Apply Thermal Paste
Apply a small, pea-sized amount of thermal paste to the center of your CPU's integrated heat spreader (IHS). The pressure from the cooler will spread it evenly. Avoid applying too much or too little.
Figure 5: Diagram illustrating the full CPU coverage design, showing the enlarged copper base for maximum heat dissipation.
6. Mount the Pump Block
Carefully place the pump block onto the CPU, aligning the mounting holes with the standoffs. Secure the pump block with the provided screws, tightening them in a diagonal pattern until snug. Do not overtighten.
Figure 6: Visual representation of the pump cooling design, ensuring efficient heat transfer from the CPU.
7. Install the Radiator and Fans
Mount the 360mm radiator to an available fan mounting location in your PC case (e.g., top, front). Attach the three 120mm ARGB PWM fans to the radiator using the longer screws, ensuring proper airflow direction (typically blowing air through the radiator and out of the case). Connect the fan cables to the fan headers on the motherboard or a fan controller.
Figure 7: Close-up of the evaporation-proof tubing, highlighting its multi-layer structure and reinforced mesh for durability.
Figure 8: Details of the fan construction, including the FDB bearing and low impurity acrylic for optimal performance and lighting.
8. Connect Power and RGB Cables
Connect the pump's power cable to the CPU_FAN or AIO_PUMP header on your motherboard. Connect the ARGB cables from the fans and pump to the appropriate ARGB headers on your motherboard or a dedicated RGB controller. Ensure all connections are secure.
9. Install Graphics Card (GPU)
Locate the primary PCIe x16 slot on your motherboard. Remove the necessary expansion slot covers from your PC case. Carefully insert the graphics card into the PCIe slot until it clicks into place. Secure the graphics card with the retention clip and a screw to the case.
Video 2: Demonstrates the installation process of a graphics card into a PC case, including aligning with the PCIe slot and securing it.
10. Connect Power Supply Cables
Connect the 24-pin ATX power cable and the 8-pin (or 4+4-pin) CPU power cable from your power supply to the corresponding headers on the motherboard. Connect the PCIe power cables to your graphics card. For modular power supplies, only connect the necessary cables to reduce clutter.
Video 3: Illustrates the process of connecting power supply cables, emphasizing the benefits of modular power supplies for cable management.
11. Cable Management
Route all cables neatly behind the motherboard tray and through cable management grommets. Use zip ties or Velcro straps to secure cables and maintain good airflow within the case. This improves both aesthetics and cooling performance.
12. Final Checks and Power On
Double-check all connections to ensure they are secure. Close the side panels of your PC case. Connect your monitor, keyboard, and mouse. Power on your system and verify that all components, including the AIO cooler and fans, are functioning correctly.
Video 4: A final overview of the assembled PC, demonstrating the successful installation and power-on sequence with RGB lighting.
Operating Instructions
Once your system is assembled and powered on, you can manage the cooler's performance and RGB lighting through MSI's dedicated software (e.g., MSI Center). This software allows you to:
- Monitor CPU temperatures in real-time.
- Adjust fan speeds (PWM control) for optimal cooling or noise levels.
- Customize ARGB lighting effects and colors for the fans and pump cap.
- Set up performance profiles for different usage scenarios (e.g., gaming, silent operation).
Maintenance
Regular maintenance ensures the longevity and optimal performance of your AIO cooler:
- Dust Cleaning: Periodically clean dust from the radiator fins and fan blades using compressed air. Ensure fans are not spinning during cleaning.
- Thermal Paste: Reapply thermal paste every 1-2 years or if you notice a significant increase in CPU temperatures.
- Tubing Inspection: Check the tubing for any signs of leaks, kinks, or damage. While the tubing is evaporation-proof, regular inspection is recommended.
- Fan Bearings: The FDB bearings are designed for long life, but listen for any unusual noises from the fans, which might indicate an issue.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| High CPU Temperatures | Insufficient thermal paste, poor pump contact, dust buildup on radiator, incorrect fan orientation. | Reapply thermal paste, ensure pump is securely mounted, clean radiator/fans, check fan airflow. |
| Fans Not Spinning / RGB Not Working | Loose cable connections, incorrect header connection, software issue. | Check all fan/RGB cable connections, ensure connected to correct headers (PWM/ARGB), restart system, reinstall MSI software. |
| Pump Noise / Malfunction | Air bubbles in the loop, pump failure. | Orient radiator higher than pump to allow air to collect in radiator, gently shake system to dislodge bubbles. If persistent, contact support. |
| System Not Booting After Installation | Loose power cables, incorrectly seated components (CPU, RAM, GPU). | Double-check all power connections (24-pin, CPU, PCIe), reseat CPU, RAM, and GPU. Ensure CPU is correctly oriented. |
Specifications
| Feature | Specification |
|---|---|
| Product Dimensions | 15.39 x 4.69 x 1.06 inches; 5.25 Pounds |
| Item Model Number | MAG CORELIQUID E360 WHITE |
| Date First Available | September 26, 2023 |
| Manufacturer | MSI |
| Power Connector Type | 4-Pin |
| Voltage | 12 Volts |
| Wattage | 35 watts |
| Cooling Method | Water |
| Compatible Devices | Desktop |
| Noise Level | 18 dB |
| Material | Ceramic |
| Maximum Rotational Speed | 1200 RPM |
| UPC | 824142372227, 824142333068 |
Warranty and Support
MSI products typically come with a manufacturer's warranty. Please refer to the official MSI website or the warranty card included in your product packaging for detailed warranty terms and conditions. For technical support, driver downloads, or further assistance, visit the official MSI support page or contact their customer service.
