Brightever ST648W-50-ND-C

Brightever ST64 LED Edison Bulb Instruction Manual

Model: ST648W-50-ND-C

Introduction

Thank you for choosing the Brightever 12-Pack LED Edison Bulb. These ST64 vintage filament light bulbs are designed to provide high brightness and energy efficiency, offering a long-lasting lighting solution for your home or commercial space. With a daylight white 5000K color temperature, 1400 lumens, and a CRI of 90+, they ensure vivid and accurate color representation. Please read this manual carefully before installation and use.

Safety Information

  • Always turn off power at the main circuit breaker before installing or replacing bulbs.
  • Do not use with dimmers. These bulbs are non-dimmable.
  • Ensure the bulb is securely screwed into the E26 medium base socket.
  • Do not exceed the maximum wattage rating of your fixture.
  • Avoid touching the bulb with wet hands.
  • For indoor use only.
  • If the bulb is damaged, discontinue use immediately.

What's in the Box

  • LED Edison Bulbs (12 Count)
  • User Manual

Setup

  1. Power Off: Before installation, ensure the power to the light fixture is turned off at the circuit breaker to prevent electrical shock.
  2. Unpack: Carefully remove the LED Edison bulb from its packaging.
  3. Install: Screw the bulb clockwise into a standard E26 medium base socket until it is snug. Do not overtighten.
  4. Power On: Restore power to the fixture at the circuit breaker.
A single Brightever ST64 LED Edison bulb next to a 12-pack of the same bulbs.

Image: Brightever ST64 LED Edison Bulb and 12-pack. These bulbs feature a clear glass design with visible LED filaments, resembling traditional Edison bulbs.

Diagram showing dimensions and specifications of the ST64 LED Edison Bulb, including 2.51 inch width, 5.65 inch height, E26 base, 1400 Lumens brightness, 120V voltage, 8W power, 100W incandescent equivalent, 25000 hours lifespan, non-dimmable, and CRI 90+.

Image: Detailed specifications and dimensions of the ST64 LED Edison Bulb, highlighting its E26 base for easy installation.

Operating Instructions

Once installed, operate the Brightever LED Edison Bulb like any standard light bulb using your fixture's switch.

  • Turning On/Off: Use the wall switch or fixture switch to turn the light on or off.
  • Non-Dimmable: These bulbs are designed for on/off operation only and are not compatible with dimmer switches. Using them with a dimmer may cause damage to the bulb or the dimmer.

Video: Demonstrates the Brightever ST64 LED Edison Bulb in various lighting fixtures, showcasing its brightness and vintage aesthetic. The video highlights features like 360-degree beam angle and high CRI for vivid colors.

Maintenance

  • Cleaning: To clean the bulb, ensure the power is off and the bulb is cool. Wipe gently with a soft, dry cloth. Do not use liquid cleaners.
  • Replacement: With an average lifespan of 25,000 hours, these bulbs require infrequent replacement. When replacement is needed, follow the setup instructions.

Troubleshooting

ProblemPossible CauseSolution
Bulb does not light up.No power to the fixture, loose connection, or faulty bulb.Check circuit breaker. Ensure bulb is screwed in tightly. Test bulb in another working fixture.
Bulb flickers or buzzes.Incompatible dimmer switch, loose connection, or electrical interference.Ensure no dimmer switch is being used. Tighten bulb. Consult an electrician if problem persists.
Light is too dim/bright.Incorrect bulb for desired brightness.These bulbs provide 1400 lumens (100W equivalent). If different brightness is needed, consider other Brightever models.
Comparison image showing a Brightever ST64 bulb with no flicker versus other brand bulbs with frequent flicker, emphasizing eye protection.

Image: Visual comparison demonstrating the flicker-free operation of Brightever ST64 bulbs compared to flickering from other brands, highlighting eye protection.

Specifications

FeatureDetail
BrandBrightever
Model NameST648W-50-ND-C
Light TypeLED
Wattage8 Watts
Incandescent Equivalent100 Watts
Brightness1400 Lumens
Color Temperature5000 Kelvin (Daylight White)
Color Rendering Index (CRI)90+
Bulb Shape SizeST64
Bulb BaseE26 Medium Base
DimmableNo
Lifespan25,000 Hours
Voltage120 Volts
Beam Angle360 Degrees
MaterialGlass
Indoor/Outdoor UsageIndoor
Special FeaturesEnergy Efficient, Eye-Friendly, High Efficiency, Long Lasting, Flicker-Free
Circular icons illustrating key features of the ST64 LED Edison Bulb: No Harsh Glare, Energy Saving, No Flicker, High Brightness, No Buzzing, and 360° Emitting Angle.

Image: Visual representation of the bulb's features including energy saving, high brightness, and eye-friendly design.

Comparison of fruit colors under CRI 90+ lighting (left) versus CRI 70+ lighting (right), showing more vibrant and natural colors with higher CRI.

Image: Demonstrates the high Color Rendering Index (CRI 90+) of the bulb, ensuring colors appear natural and vibrant.

Warranty & Support

Brightever products are manufactured to high-quality standards. For any questions, concerns, or warranty claims, please contact Brightever customer support through the retailer's platform or visit the official Brightever website for assistance.

Please retain your purchase receipt as proof of purchase for warranty purposes.

© 2025 Brightever. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.