5Rcom Rolling Mobile TV Stand (Model: 13-50inch) Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your 5Rcom Rolling Mobile TV Stand. Designed for 13-inch to 50-inch flat or curved TVs, this stand offers versatile viewing options with height adjustment, tilting, and 90-degree rotation capabilities. Its mobile design with lockable wheels allows for easy relocation, while the option for stable feet provides a stationary setup. Please read this manual thoroughly before installation and use to ensure safe and correct operation.

Safety Information

Always ensure that your TV's mounting holes, dimensions, and weight comply with the stand's specifications (maximum VESA 200x200mm, maximum weight 44 lbs). Improper installation may cause the TV to fall, resulting in injury or property damage. Do not exceed the recommended weight capacity. Keep small parts away from children. This product is intended for indoor use; outdoor use may require additional precautions against weather elements.

Package Contents

Before assembly, verify that all components are present and undamaged. Refer to the parts list below:

• Base components (cross-shaped base, square tubes)
• Central column sections
• Head locking bracket
• VESA plate and TV mounting brackets
• Wheels (with locks) and optional adjustable feet
• Assorted screws, washers, and spacers for TV mounting
• Assembly tools (Allen wrench)
• Cable management clips

Image: All components of the 5Rcom Rolling Mobile TV Stand laid out for assembly.

Setup and Assembly

Follow these steps carefully for proper assembly. An assembly video is provided for visual guidance.

1. Install the Base

• Attach the four square tubes to the central base connector using the provided screws and Allen wrench. Ensure the long square tubes face forward for proper balance.
• Screw the four lockable wheels into the ends of the square tubes. Alternatively, install the adjustable fixed feet if mobility is not desired.

Image: Detailed view of the base with options for rolling wheels or stable feet.

2. Install the Column

• Insert the lower column section into the central base connector. Secure it by tightening the pre-installed screws on the column.
• Insert the upper column section into the lower column section. Align the holes to set the desired height. Secure with the provided screws.

3. Install Head Locking Bracket

• Loosen the screws on the head locking bracket slightly.
• Slide the head locking bracket onto the top of the upper column section. Adjust to your preferred height and tighten the screws to secure it firmly.

4. Install VESA Plate and TV Mounting Brackets

• Attach the VESA plate to the back of your TV using the appropriate screws, washers, and spacers from the provided hardware kit. Ensure the plate is centered and securely fastened.
• The stand supports VESA patterns from 75x75mm to 200x200mm. For 100x200mm, the TV can only be mounted vertically.

Image: VESA mounting patterns compatibility chart.

5. Hang TV and Ensure Security

• Carefully lift your TV and hook the VESA plate onto the head locking bracket on the stand.
• Secure the TV to the bracket using the safety lock mechanism to prevent accidental dislodgement.

Operating Instructions

Height Adjustment

The TV stand offers 6 levels of height adjustment (50mm per level). To adjust the height, loosen the screws on the central column, slide the upper column to the desired position, and re-tighten the screws securely.

Image: Demonstrating height adjustment and tilt feature.

Tilt Adjustment

The TV can be tilted up and down from +20° to -2°. Loosen the tilt adjustment knob on the VESA plate, set your preferred viewing angle, and then tighten the knob to lock the position.

Rotation (Portrait to Landscape)

The TV mount allows for 90° rotation, enabling seamless switching between horizontal (landscape) and vertical (portrait) orientations. This is ideal for viewing different types of content. Ensure the TV is securely locked in place after rotation.

Image: TV rotating 90 degrees for landscape or portrait viewing.

Mobility and Stability

The stand comes with two types of feet: flexible wheels for smooth movement on various surfaces (with locks for stability) and adjustable height feet for stationary use, especially on uneven carpets. Choose the option that best suits your environment.

Cable Management

Utilize the integrated cable management function to keep cables neat and tidy along the back of the TV mount, preventing clutter and potential hazards.

Image: Cable management feature for a tidy setup.

Maintenance

To ensure the longevity and optimal performance of your TV stand, follow these maintenance guidelines:

• Cleaning: Wipe down the stand with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish.
• Fasteners: Periodically check all screws and bolts to ensure they are tight. Re-tighten if necessary to maintain stability.
• Wheels/Feet: If using wheels, ensure they roll smoothly and locks engage properly. If using fixed feet, ensure they are stable and level.
• Storage: When not in use, the stand can be placed in a closet or corner to save space.

Troubleshooting

If you encounter any issues, refer to the following common solutions:

• TV is unstable: Ensure all screws are tightened, especially those connecting the column to the base and the VESA plate to the TV. Verify the TV weight does not exceed 44 lbs.
• Difficulty rolling: Check if the wheel locks are engaged. Clean any debris from the wheels.
• TV not tilting/rotating smoothly: Loosen the adjustment knobs/screws slightly before attempting to move the TV, then re-tighten.
• Missing parts: Contact 5Rcom customer support for assistance.

Specifications

Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact 5Rcom customer service directly. Keep your purchase receipt for any warranty claims.