EUGAD 0054SZT LED Mirror Dressing Table and Chair User Manual

Introduction

This manual provides essential instructions for the assembly, operation, and maintenance of your EUGAD 0054SZT LED Mirror Dressing Table with Velvet Chair. Please read this manual thoroughly before use to ensure proper function and longevity of your product.

Safety Information

• Ensure all components are securely fastened during assembly.
• Do not exceed the maximum load capacity: Table: 50kg; Chair: 135kg.
• Keep electrical components (LED mirror) away from water.
• Use the provided anti-tip strap to secure the dressing table to a wall, if necessary, to prevent accidental tipping.

Package Contents

Verify that all items listed below are present before beginning assembly:

• Dressing Table (1)
• Velvet Chair (1)
• LED Mirror (1)
• Table Legs (4)
• Chair Legs (4)
• Mounting Accessories (1 set)
• Installation Instruction Manual (1)

Setup and Assembly

The EUGAD 0054SZT dressing table is largely pre-assembled. Only the mirror and legs require attachment.

1. Attach the Table Legs: Carefully turn the dressing table upside down. Securely attach the four metal legs to the designated mounting points on the underside of the table using the provided screws and tools. Ensure they are tightened firmly.
2. Attach the Chair Legs: Similarly, attach the four metal legs to the velvet chair base.
3. Install the LED Mirror: Insert the LED mirror into the designated slot on the dressing table surface. Ensure it is stable and properly seated.
4. Connect Power: Connect the USB cable from the LED mirror to a suitable USB power source (e.g., a USB wall adapter, not included).
5. Positioning: Place the assembled dressing table and chair in your desired location. Consider using the anti-tip strap for added stability, especially if placing near a wall.

Image 1: Fully assembled EUGAD 0054SZT LED Mirror Dressing Table with Velvet Chair.

Image 2: Diagram illustrating the dimensions of the dressing table and chair, including drawer sizes and overall height.

Operating Instructions

LED Mirror Operation

The integrated LED mirror features adjustable lighting and a touch control switch.

• Power On/Off: Touch the smart touch switch on the mirror surface to turn the LED light on or off.
• Adjust Brightness/Color Temperature: With the light on, press and hold the touch switch to cycle through the three adjustable light settings: warm light, neutral light, and cold light. Release the switch when the desired setting is reached.
• Mirror Rotation: The mirror can be rotated 360° to adjust the viewing angle as needed.
• Detachable Design: The mirror is detachable for convenience.

Image 3: Illustration of the LED mirror's features, including 3 adjustable brightness levels (natural, warm, cold light), 360° rotation, smart touch switch, USB port, and detachable design.

Drawer Usage

The dressing table includes three drawers for organized storage.

• Opening/Closing: The drawers are equipped with quality rails for smooth opening and closing. Gently pull or push the drawers.
• Storage: Utilize the separate compartments within the drawers to organize cosmetics, skincare products, jewelry, and other items.

Image 4: View of the dressing table with drawers partially open, highlighting the spacious worktop and internal storage capacity.

Velvet Chair Adjustment

The accompanying velvet chair features an adjustable backrest for comfort.

• Backrest Adjustment: The ergonomic backrest can be adjusted to various angles to find a comfortable sitting position.

Image 5: Illustration of the velvet chair's features, including sponge padding, velvet surface, and adjustable backrest.

Care and Maintenance

• Cleaning the Table: The dressing table surface (MDF E1 with PVC sides) is water-repellent and easy to clean. Wipe with a dry cloth to remove dust. For spills, use a slightly damp cloth and dry immediately. Avoid abrasive cleaners.
• Cleaning the Mirror: Use a soft, lint-free cloth and a non-abrasive glass cleaner specifically designed for mirrors. Do not spray cleaner directly onto the mirror; apply it to the cloth first.
• Cleaning the Chair: The velvet upholstery can be gently spot cleaned with a mild fabric cleaner. Test on an inconspicuous area first.
• Regular Checks: Periodically check all screws and fasteners to ensure they remain tight.

Image 6: Visual representation of the product's durable construction, highlighting water-repellent, easy-to-clean, scratch-resistant, and glossy surfaces, along with metal legs and adjustable feet.

Troubleshooting

This section addresses common issues you might encounter.

• LED Mirror Not Lighting Up:
  • Ensure the USB cable is securely connected to both the mirror and a functioning USB power source.
  • Verify the power source is active.
  • Gently touch the smart touch switch on the mirror surface to activate the light.
• Drawers Sticking:
  • Check if any items inside the drawer are obstructing its movement.
  • Ensure the drawer rails are clean and free of debris.
• Table/Chair Wobbling:
  • Check that all leg screws are securely tightened.
  • Adjust the leveling feet on the table legs to compensate for uneven floor surfaces.

Specifications

Warranty and Support

Specific warranty information for the EUGAD 0054SZT LED Mirror Dressing Table and Chair is not provided in this manual. For warranty details or customer support, please refer to the purchase documentation or contact EUGAD customer service directly through their official website or the retailer from whom the product was purchased.