iFlight BLITZ Whoop 5.8G 2.5W VTX
iFlight BLITZ Whoop 5.8G 2.5W VTX Instruction Manual
Model: BLITZ Whoop 5.8G 2.5W VTX
Introduction
The iFlight BLITZ Whoop 5.8G 2.5W VTX is a high-power video transmitter designed for FPV (First Person View) applications. It features robust construction, multiple power levels, and an integrated cooling system to ensure stable performance. This VTX offers fast frequency lock and built-in output power self-check functionality, minimizing interference with other pilots. This manual provides detailed instructions for installation, operation, and maintenance of your VTX.
Important Safety Information
- Please read these instructions carefully before use to ensure proper wiring and operation.
- Always ensure the antenna is installed before powering on the VTX. Operating without an antenna can severely damage the module and shorten its lifespan.
- Verify the correct voltage range (7-34V DC) and polarity (positive/negative) before connecting power to prevent component damage.
- Ensure adequate airflow and space around the VTX for proper heat dissipation during operation. Insufficient cooling may trigger overheat protection, reducing power transmission or causing shutdown.
- Power levels above 25mW may require a HAM license or approval from local authorities. Always ensure you are flying within legal frequency and power limits for your region. The VTX is set to 25mW by default.
Package Contents
The following items are included in your iFlight BLITZ Whoop 5.8G 2.5W VTX package:
- 1 x BLITZ Whoop 5.8G 2.5W VTX
- Necessary cables and connectors
- Antenna (if included with specific kit)
Image: The BLITZ Whoop VTX shown alongside its included cables, connectors, and antenna, illustrating the complete package contents.
Product Overview
The iFlight BLITZ Whoop 5.8G 2.5W VTX features a compact design with clearly labeled ports and control buttons. Its robust CNC cooling casing and integrated cooling fan offer dual heat dissipation, ensuring reliable performance even at high power outputs.
VTX Components
Image: A front-angled view of the iFlight BLITZ Whoop VTX, highlighting its compact form factor and the "BLITZ VTX 2.5W" and "5.8G" markings on the top casing.
Control Buttons
The VTX is equipped with two main control buttons for easy configuration:
- Power Button: Used to control output power and PIT mode.
- Band and Channel Button: Used to select the operating band and channel.
Image: A side view of the iFlight BLITZ Whoop VTX, clearly showing the "Band/CH" and "Power" buttons located on the side panel.
Ports and Connections
The VTX features several ports for power, video input/output, and telemetry:
- VBAT: 2-8S (7-34V DC) Positive Input
- GND: Negative Input/Ground
- 5V Out: 5V Voltage Output for external devices
- IRC: IRC Tramp Signal Input for VTX telemetry
- Video In: Video Signal Input
- Camera In: Camera video Input
- Camera Out: Camera video output
Image: The underside of the iFlight BLITZ Whoop VTX, displaying the labels for all connection ports including Vbat, GND, IRC, Video in, Camera out, 5V-out, GND, and Camera in.
Setup and Installation
Proper installation is crucial for the optimal performance and longevity of your BLITZ Whoop VTX. Follow these guidelines:
- Mounting: The VTX has a 25.5x25.5mm mounting pattern with Φ1.6 holes. Securely mount the VTX to your drone frame using appropriate hardware. Ensure enough space around the VTX for air convection and heat dissipation.
- Antenna Connection: Connect your 5.8G antenna to the MMCX interface on the VTX. Always ensure the antenna is securely connected before applying power to the VTX.
- Power Connection: Connect the VBAT port to your flight battery (7-34V DC, 2-8S) and GND to the negative terminal. Double-check polarity before powering on.
- Video and Camera Connections: Connect your FPV camera to the "Camera In" port and the video signal from your flight controller or camera to the "Video In" port if applicable. Use "Camera Out" for video passthrough if needed.
- IRC Tramp Connection: Connect the IRC port to a UART TX pad on your flight controller for VTX telemetry and configuration via Betaflight OSD.
Operation
The BLITZ Whoop VTX is configured using its onboard buttons and LED indicators. It also supports IRC Tramp protocol for configuration via your flight controller.
Power Button Functions
- Press and hold for 2 seconds: Enters or exits PIT mode. A solid green light indicates that PIT mode is active. In PIT mode, the VTX transmits at a very low power to prevent interference during setup or before a race.
- Short press: Changes the VTX output power level. The green LED will flash to indicate the current power setting:
- 1 flash = 25mW
- 2 flashes = 400mW
- 3 flashes = 1000mW
- 4 flashes = 2500mW
Band and Channel Button Functions
- Press and hold for 2 seconds: Switches the operating band (A-R). The red LED will flash to indicate the current band.
- Short press: Switches the operating channel (1-8) within the selected band. The blue LED will flash to indicate the current channel.
IRC Tramp Configuration (Betaflight)
The VTX supports IRC Tramp protocol, allowing you to configure settings directly from your Betaflight OSD or configurator. Ensure the IRC port is connected to a UART TX pad on your flight controller and the VTX protocol is set to IRC Tramp in Betaflight. Download and import the provided VTX table for full functionality.
Specifications
| Feature | Description |
|---|---|
| Input Voltage | 7-34V DC (2-8S LiPo) |
| Output Power | PIT/25mW/400mW/1000mW/2500mW |
| Interface | MMCX |
| VTX Telemetry | IRC Tramp |
| Mounting Pattern | 25.5x25.5mm / Φ1.6 |
| Weight | 32g (excluding antenna) |
| Channels | 40 (including Raceband) |
| Cooling | CNC cooling casing with integrated cooling fan |
| Built-in Microphone | Yes |
Maintenance
To ensure the longevity and optimal performance of your BLITZ Whoop VTX, consider the following maintenance tips:
- Keep Clean: Regularly clean the VTX to prevent dust and debris buildup, especially around the cooling fan and heatsink fins. Use a soft brush or compressed air.
- Check Connections: Periodically inspect all cable connections (power, video, antenna) for signs of wear, corrosion, or loose connections.
- Antenna Care: Protect your antenna from physical damage. A damaged antenna can lead to poor video quality and VTX damage.
- Heat Management: Always ensure the VTX has adequate airflow during operation. Avoid enclosing it in tight spaces without ventilation.
Troubleshooting
If you encounter issues with your BLITZ Whoop VTX, refer to the common problems and solutions below:
| Problem | Possible Cause | Solution |
|---|---|---|
| No video signal or poor video quality | Loose antenna connection, incorrect channel/band, VTX in PIT mode, damaged antenna, insufficient power, interference. | Ensure antenna is securely connected. Verify VTX is on the correct band/channel matching your receiver. Check if VTX is in PIT mode (solid green LED) and exit if necessary. Inspect antenna for damage. Confirm correct voltage supply. Move away from sources of interference. |
| VTX gets excessively hot and reduces power | Insufficient cooling, no antenna connected. | Ensure adequate airflow around the VTX. Do not operate without an antenna connected. Check if the cooling fan is obstructed or not functioning. |
| VTX does not power on | Incorrect wiring, reverse polarity, voltage outside specified range, faulty unit. | Double-check all wiring connections, especially power (VBAT and GND). Verify correct polarity. Ensure input voltage is within 7-34V DC. If all checks fail, the unit may be faulty. |
| Cannot change settings via Betaflight OSD | IRC Tramp not connected or configured correctly. | Ensure the IRC port is connected to a UART TX pad on your flight controller. Verify that the VTX protocol is set to IRC Tramp in Betaflight configurator. Ensure the correct VTX table is loaded. |
Related documentsBLITZ Whoop 5.8G 2.5W VTX
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.