Wera 05051016001
Wera Kraftform Kompakt 20 Tool Finder 1 with Pouch Instruction Manual
Model: 05051016001
Introduction
This manual provides essential instructions for the safe and effective use of your Wera Kraftform Kompakt 20 Tool Finder 1 with Pouch. Please read this manual thoroughly before operating the tool and retain it for future reference.
Product Overview
The Wera Kraftform Kompakt 20 Tool Finder 1 is a compact screwdriver set designed for various applications. It features a multi-component Kraftform handle, an integrated bit magazine, and a Rapidaptor bit holder for quick bit changes. The set includes various bits for common screw profiles, all housed in a durable pouch.
Image: The Wera Kraftform Kompakt 20 Tool Finder 1 set, showing the handle, bit holder, various bits, and the storage pouch.
Image: Detailed view of the Kraftform Kompakt 20 Tool Finder 1 contents, including the handle, bit holder, and specific bit types and sizes (PH1, PH2, PZ1, PZ2, TX25, 0.8x5.5).
Safety Information
Always observe the following safety precautions:
- Wear appropriate personal protective equipment (PPE), such as safety glasses, when using hand tools.
- Ensure the correct bit is selected for the fastener to prevent damage to the fastener or bit.
- Do not use excessive force. If a fastener is stuck, investigate the cause rather than forcing it.
- Keep tools clean and dry to prevent corrosion and ensure proper function.
- Store the tool set in its pouch when not in use to protect the components.
Setup and Assembly
- Accessing Bits: The bits are stored within the handle. To access them, pull the green collar on the handle downwards. The bit magazine will slide out, revealing the stored bits.
- Inserting a Bit: Select the required bit from the magazine. Insert the bit into the Rapidaptor bit holder until it clicks securely into place. The Rapidaptor system ensures a firm hold and quick release.
- Removing a Bit: To remove a bit, simply push the green collar of the Rapidaptor bit holder forward. The bit will be released, allowing for easy removal.
- Storing Bits: After use, return the bits to their designated slots within the handle's magazine. Push the magazine back into the handle until it locks.
Image: The handle with the bit magazine extended, showing the various bits stored inside.
Image: A hand inserting a screwdriver bit into the Rapidaptor bit holder, which is attached to the handle.
Image: A hand demonstrating the removal of a bit from the Rapidaptor holder by pushing the green collar forward.
Operating Instructions
The Wera Kraftform Kompakt 20 is designed for manual screwdriving tasks. Its ergonomic Kraftform handle provides comfortable and efficient operation.
- Ergonomic Handle: The multi-component Kraftform handle is shaped to fit the hand, reducing fatigue during prolonged use.
- Bit Identification: Each bit features a color-coded ring and size marking for easy identification, allowing quick selection of the correct bit for the job.
- Magnetic Bit Holder: The Rapidaptor bit holder is magnetic, ensuring that bits and fasteners are held securely during operation.
- Power Tool Compatibility: The Rapidaptor bit holder can also be used with power tools for increased versatility, provided the power tool is set to a low torque setting suitable for screwdriving.
Image: An illustration showing how the Kraftform handle fits ergonomically in the hand, distributing pressure evenly.
Image: A visual guide to the Wera Tool Finder color coding system, illustrating how different bit types (Phillips, Pozidriv, Torx, Hex, Slotted) are assigned distinct colors for quick recognition.
Image: An illustration showing the magnetic property of the bit holder, attracting metal particles to demonstrate its magnetic function.
Image: The Wera Kraftform Kompakt 20 handle and bit holder shown alongside a power drill, demonstrating compatibility for use with power tools.
Maintenance
- Cleaning: Wipe the handle and bits with a clean, dry cloth after each use. For stubborn dirt, a slightly damp cloth can be used, followed by thorough drying.
- Storage: Always store the tool set in its provided pouch to protect the bits from loss and damage, and to keep the handle clean.
- Inspection: Periodically inspect bits for wear or damage. Replace worn or damaged bits to ensure optimal performance and prevent damage to fasteners.
Image: The Wera Kraftform Kompakt 20 Tool Finder 1 set neatly stored within its black fabric pouch.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bit slips in fastener head | Incorrect bit size/type; Worn bit; Fastener head stripped. | Ensure correct bit is used. Replace worn bit. If fastener head is stripped, use a specialized extractor tool. |
| Bit does not stay in holder | Bit not fully inserted; Rapidaptor mechanism obstructed or damaged. | Push bit firmly until it clicks. Clean Rapidaptor mechanism. If damaged, contact Wera support. |
| Bit magazine difficult to open/close | Mechanism obstructed by debris; Bits not properly seated. | Clean the mechanism. Ensure all bits are correctly placed in their slots. |
Specifications
- Model Name: Kraftform Kompakt 20 Tool Finder 1
- Model Number: 05051016001
- Brand: Wera
- Material: Metal, Plastic
- Head Style: Round (for handle), Multiple (for bits)
- Item Dimensions (L x W x H): 6.7 x 3.15 x 2.17 inches
- Item Weight: 7.1 ounces (200 Grams)
- Included Components: Kraftform Kompakt 20 Tool Finder 1 with pouch
- GTIN: 4013288185327
Warranty and Support
Wera products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the official Wera website or contact their customer support directly. Keep your purchase receipt as proof of purchase.
For technical assistance or further inquiries, please visit the Wera Store on Amazon or the official Wera website.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.