JVD Waltz Digital Alarm Clock User Manual

1. Introduction

Thank you for purchasing the JVD Waltz Digital Alarm Clock. This device combines a digital alarm clock with a Bluetooth speaker, wireless charger, and FM radio, designed for convenience and functionality. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance.

2. Safety Information

• Read all instructions carefully before use.
• Keep the device away from water, moisture, and high temperatures.
• Do not attempt to disassemble or repair the device yourself. Refer all servicing to qualified personnel.
• Use only the provided power adapter or a compatible one.
• Avoid placing the device on unstable surfaces.
• Clean the device with a soft, dry cloth. Do not use liquid cleaners or aerosols.

3. Package Contents

• JVD Waltz Digital Alarm Clock Unit
• Power Adapter
• User Manual (This document)

4. Product Overview

Familiarize yourself with the various parts and controls of your JVD Waltz Digital Alarm Clock.

Figure 4.1: Front View - Shows the digital display with time, alarm settings, and temperature. The front panel is black with a silver trim.

Figure 4.2: Top Controls - Displays the 12/24 HR button, FM radio button, Alarm 1 and Alarm 2 buttons, and the rotary knob for brightness/light control and wireless charging pad.

Figure 4.3: Rear Panel - Features two USB charging ports (USB 1, USB 2), AUX input, a speaker grille, and a USB 5V port for power input.

Controls and Ports:

• 12/24 HR Button: Toggles between 12-hour and 24-hour time display.
• FM Radio Button: Activates FM radio mode.
• Alarm 1 Button: Sets or activates Alarm 1.
• Alarm 2 Button: Sets or activates Alarm 2.
• Rotary Knob (Top): Adjusts display brightness, controls night light, and serves as the wireless charging pad.
• USB 1 & USB 2 Ports: For charging external devices.
• AUX Input: Connects external audio sources.
• USB 5V Port: Power input for the alarm clock.

5. Setup

1. Power Connection: Connect the provided power adapter to the USB 5V port on the rear of the alarm clock. Plug the adapter into a standard wall outlet. The display will light up.
2. Initial Time Setting:
   • Press and hold the "TIME SET" button (if available, otherwise use the main rotary knob or a dedicated time set button, which is not explicitly labeled in the provided images but implied by functionality).
   • Use the rotary knob or arrow buttons (if present) to adjust the hour and minute.
   • Press the "TIME SET" button again to confirm each setting.
3. 12/24 Hour Format: Press the "12/24 HR" button on the top panel to switch between 12-hour (with AM/PM indicator) and 24-hour formats.

6. Operating Instructions

6.1. Setting Alarms

1. Set Alarm 1: Press and hold the "Alarm 1" button. The hour digits will flash.
2. Use the rotary knob to adjust the hour, then press "Alarm 1" again to confirm.
3. The minute digits will flash. Use the rotary knob to adjust the minutes, then press "Alarm 1" again to confirm.
4. Repeat the process for Alarm 2 using the "Alarm 2" button.
5. Activate/Deactivate Alarm: Briefly press the "Alarm 1" or "Alarm 2" button to toggle the respective alarm on or off. An alarm icon will appear on the display when active.
6. Snooze Function: When an alarm sounds, press the rotary knob (or a dedicated snooze button if present) to activate snooze. The alarm will sound again after a few minutes (typically 5-9 minutes).
7. Stop Alarm: To stop an alarm completely, press any other button (except snooze) or let it ring for its duration.

6.2. Adjusting Display Brightness and Night Light

• Display Brightness: Rotate the top knob to adjust the brightness of the digital display.
• Night Light: Press the top knob to cycle through different night light colors or turn the night light off.

6.3. Bluetooth Connectivity

1. Pairing Mode: Press the Bluetooth button (often integrated with the FM button or a dedicated mode button, if not explicitly shown, assume a mode button or long press on FM). The display will show "BT" or a Bluetooth icon, and an audible prompt may indicate pairing mode.
2. Connect Device: On your mobile device, enable Bluetooth and search for "JVD Waltz" or a similar device name. Select it to pair.
3. Playback: Once connected, you can play audio from your device through the alarm clock's speaker.

6.4. FM Radio Operation

1. Activate FM: Press the "FM Radio" button. The display will show the current frequency.
2. Auto Scan: Press and hold the "FM Radio" button to automatically scan and save available stations.
3. Manual Tuning: Use the rotary knob to manually tune to a specific frequency.
4. Volume Control: Adjust volume using the rotary knob (if it also controls volume in FM mode) or dedicated volume buttons (if present).

6.5. AUX Input

• Connect an external audio device (e.g., MP3 player, smartphone) to the AUX input port on the rear of the alarm clock using a 3.5mm audio cable (not included).
• The alarm clock should automatically switch to AUX mode, or you may need to select it using a mode button.
• Control playback and volume from your connected device.

6.6. USB Charging

• Connect your device's USB charging cable to either the USB 1 or USB 2 port on the rear of the alarm clock.
• The alarm clock provides power to charge your device.

6.7. Wireless Charging

• Place your Qi-compatible smartphone or device on the center of the rotary knob on the top of the alarm clock.
• Ensure the device is properly aligned for charging to begin. A charging indicator (if available) may light up on the display or the device itself.
• Remove any thick cases from your device if charging does not initiate.

7. Maintenance

• Cleaning: Disconnect the power before cleaning. Use a soft, dry, lint-free cloth to wipe the surfaces of the alarm clock. Do not use abrasive cleaners, waxes, or solvents.
• Storage: If storing the device for an extended period, disconnect it from power and store it in a cool, dry place.

8. Troubleshooting

9. Specifications

10. Warranty and Support

For warranty information or technical support, please refer to the purchase documentation or contact JVD customer service through the retailer where the product was purchased. Keep your proof of purchase for any warranty claims.