SimonRack Officlick Boltless Metal Storage Shelf Instruction Manual

1. Introduction and Overview

Thank you for choosing the SimonRack Officlick Boltless Metal Storage Shelf. This robust and versatile shelving unit is designed for efficient storage in various environments, including offices, garages, and workshops. Its boltless design ensures quick and easy assembly, providing a stable and durable storage solution without the need for wall mounting.

The shelf features a thoughtful design with OSB wood shelves and lateral covers for enhanced aesthetics and functionality. Each shelf is engineered to withstand significant loads, offering reliable performance for your storage needs.

2. Safety Information

• Always handle metal components with care to avoid cuts or pinches. Wearing protective gloves is recommended during assembly.
• Ensure the assembly area is clear and well-lit.
• Do not exceed the maximum load capacity of 200 kg per shelf. Distribute weight evenly across each shelf.
• The shelving unit is designed for stability without wall fixing, but ensure it is placed on a flat, level, and stable surface.
• Keep children and pets away from the assembly area.
• The product includes plastic feet to protect your floor from scratches and marks. Ensure these are properly installed.

3. Package Contents

Please verify that all components are present before beginning assembly:

• Vertical metal profiles (uprights)
• Horizontal metal beams (long and short)
• OSB wood shelves (4 units)
• OSB wood lateral covers
• Plastic feet (4 units)
• Instruction Manual (this document)

4. Setup and Assembly Instructions

The SimonRack Officlick shelving unit features a boltless assembly system for quick and easy setup. An illustrated manual is included with the product to guide you step-by-step. Follow these general guidelines:

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, flat surface. Verify all components are present as per the package contents list.
2. Attach Plastic Feet: Secure the four plastic feet to the bottom ends of the vertical metal profiles. These protect your floor.
3. Assemble Frame: Begin by connecting the vertical profiles with the horizontal beams. The boltless system uses interlocking tabs and slots. Ensure each connection is fully engaged and secure. A rubber mallet (not included) may be helpful to gently tap connections into place.
4. Install Shelves: Once the frame is stable, insert the OSB wood shelves into the designated slots on the horizontal beams. The height of each shelf is adjustable, allowing you to customize the spacing to your needs. Ensure shelves are seated firmly and evenly.
5. Add Lateral Covers: Attach the OSB wood lateral covers to the sides of the unit for a finished aesthetic.
6. Final Check: Once assembled, gently rock the unit to ensure it is stable and all connections are secure.

Figure 1: Assembled SimonRack Officlick shelf with key dimensions and load capacity.

Figure 2: Front view of the assembled SimonRack Officlick shelf, showcasing its structure.

5. Operating Instructions (Usage)

Your SimonRack Officlick shelf is ready for use once fully assembled and stable. Follow these guidelines for optimal performance:

• Load Capacity: Each shelf can support a maximum weight of 200 kg. Do not exceed this limit to prevent damage or instability.
• Weight Distribution: Distribute items evenly across each shelf. Avoid concentrating heavy loads in one small area.
• Stability: The shelf is designed to be stable on its own. However, for added safety, especially in areas with high traffic or seismic activity, consider securing it to a wall (mounting hardware not included).
• Adjustable Shelves: You can reconfigure the shelf heights at any time by disassembling and reassembling the horizontal beams at different slot levels.

6. Maintenance

To ensure the longevity and appearance of your SimonRack Officlick shelving unit, follow these simple maintenance tips:

• Cleaning: Wipe down metal and wood surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• Corrosion Protection: The metal components are treated with an epoxy polyester coating and galvanized (Z275) for enhanced corrosion protection. While highly resistant, avoid prolonged exposure to excessive moisture or corrosive substances.
• Regular Inspection: Periodically check all connections to ensure they remain tight and secure. Re-engage any loose connections if necessary.

7. Troubleshooting

Issue: Shelf appears unstable or wobbly.

Solution: Ensure all horizontal beams are fully engaged in the vertical profile slots. Check that the unit is placed on a completely flat and level surface. Verify that the plastic feet are securely attached.

Issue: Shelf bows or bends under load.

Solution: Immediately remove some weight. Check that the total load on the shelf does not exceed 200 kg. Ensure weight is distributed evenly. The steel used (DC 01, EN 10130 standard) allows for recovery after bending, but repeated overloading can cause permanent deformation.

Figure 3: Flex Point Certificate illustration, demonstrating the shelf's resilience under load.

8. Specifications

9. Warranty and Support

SimonRack products are manufactured in Spain under strict European quality standards (EN 10130 for steel DC 01). This commitment to quality ensures durability and performance. For any questions regarding assembly, parts, or product functionality, please refer to this manual or contact your retailer for support.