1. Introduction
This manual provides essential information for the safe and efficient operation of your Bear YSJ-D05M1 Foldable Automatic Water Dispenser. Please read these instructions thoroughly before initial use and retain them for future reference.
Image: The Bear YSJ-D05M1 Foldable Automatic Water Dispenser actively dispensing water into a glass. The compact, folded design is shown in the top-left corner.
2. Safety Information
- This product is designed for dispensing pure drinking water only (e.g., mineral water, pure water). Do not use it to pump wine, milk, oil, or other liquids.
- Do not immerse the main dispenser unit in water for cleaning. Use a damp cloth to wipe the exterior.
- Ensure the silicone pipe is securely connected to prevent leaks.
- Keep out of reach of children to prevent misuse or accidents.
- For optimal performance and safety, ensure the water bucket is placed lower than the dispenser when using the tabletop setup.
Image: Visual guide illustrating the correct placement of the water bucket relative to the dispenser and a warning against using the dispenser for liquids other than pure water.
3. Package Contents
Please check the package for the following items:
- 1x Foldable Water Pump
- 1x BPA-free Silicone Pipe (43.3 inches)
- 1x Type-C Charging Cable
- 1x Pipe Adapter
Image: A visual representation of all items included in the product package.
4. Product Overview
The Bear YSJ-D05M1 water dispenser features a foldable design for hygiene and portability, quantitative water dispensing, and dual-use functionality for both tabletop and bucket setups. It is equipped with a built-in 1200mAh battery for long-lasting use.
Key Features:
- Foldable Design: The water outlet can be folded to prevent dust accumulation, ensuring clean water.
- Quantitative Water Dispensing: Offers 3 preset water volumes (0.5L, 0.8L, 1.5L) with automatic stop.
- Dual-use Functionality: Can be used directly on water buckets or as a tabletop dispenser.
- Portable: Compact size makes it suitable for home, office, camping, and travel.
- Rechargeable Battery: Built-in 1200mAh battery with Type-C charging for convenience.
- Low Noise Operation: Operates at less than 30 dB.
Image: An infographic detailing the main features of the water dispenser.
Image: A comparison illustrating how the dispenser simplifies water access compared to traditional methods.
5. Setup
5.1 Attaching the Silicone Pipe
- Connect one end of the BPA-free silicone pipe to the inlet port at the bottom of the dispenser unit.
- Ensure the connection is firm to prevent any leakage.
5.2 Using with a 5-Gallon Bottle (Bucket Mode)
- Remove the cap from your 5-gallon water bottle.
- Insert the free end of the silicone pipe into the water bottle, ensuring it reaches the bottom.
- Place the dispenser unit directly on top of the water bottle opening. The dispenser is designed to fit most 1-5 gallon bottles.
5.3 Using as a Tabletop Dispenser
- If the pipe adapter is installed, gently remove it from the bottom of the dispenser.
- Connect one end of the silicone pipe to the inlet port at the bottom of the dispenser.
- Insert the other end of the silicone pipe into the water bottle.
- Place the dispenser unit on a stable tabletop surface. Ensure the water bottle is placed lower than the dispenser for proper water flow.
Image: Detailed steps for both bucket and tabletop usage.
Image: Examples of the dispenser being used on a tabletop and directly on a water bucket.
5.4 Bottle Compatibility
The dispenser is compatible with most 1-5 gallon water bottles. Note: The water pump does not fit screw-top bottles or bottles without a cap.
Image: Guide to compatible and incompatible water bottle types.
5.5 Charging the Dispenser
The dispenser has a built-in 1200mAh battery. Connect the provided Type-C charging cable to the charging port on the back of the unit and to a suitable USB power source. A full charge takes approximately 4 hours and can dispense up to 21 gallons of water.
Image: Charging instructions and battery life indicators.
6. Operating Instructions
6.1 Powering On/Off and Folding Mechanism
- To unfold the water outlet, press the 'Open' button on the top of the dispenser. The spout will automatically extend.
- To fold the water outlet back, gently push it down until it clicks into place.
6.2 Dispensing Water
- Place your cup or container under the water outlet.
- Select the desired water volume by pressing the capacity button (0.5L, 0.8L, or 1.5L). The corresponding indicator light will illuminate.
- Press the power button to start dispensing. The dispenser will automatically stop once the selected volume is reached.
- To manually stop dispensing at any time, press the power button again.
Image: Instructions for quantitative water dispensing.
6.3 Video Demonstration
Video: A demonstration of the portable electric water dispenser in use, showing its setup and dispensing function.
Video: A comprehensive overview of the Bear water dispenser, demonstrating its foldable design, dual-use functionality, and automatic water pumping for 5-gallon bottles.
7. Maintenance
7.1 Cleaning the Dispenser
- Wipe the exterior of the dispenser with a soft, damp cloth. Do not immerse the main unit in water.
- Regularly clean the silicone pipe by flushing it with clean water.
- Ensure the water outlet is free from dust and debris by utilizing the foldable design.
Image: The foldable design helps maintain hygiene by protecting the water outlet from dust.
8. Troubleshooting
- No water dispensed: Ensure the unit is charged. Check if the silicone pipe is properly connected and submerged in water.
- Slow water flow: Check for any kinks or blockages in the silicone pipe. Ensure the water bottle has sufficient water.
- Leakage: Verify that all connections, especially the silicone pipe to the dispenser and the dispenser to the bottle/adapter, are secure.
- Unit not turning on: Charge the unit fully.
9. Specifications
| Specification | Detail |
|---|---|
| Model Number | YSJ-D05M1 |
| Color | White |
| Material | Acrylonitrile Butadiene Styrene (ABS), Silicon |
| Capacity (Dispensing) | 0.5L, 0.8L, 1.5L |
| Product Dimensions | 4.27"D x 4.27"W x 9.57"H |
| Item Weight | 1.17 Pounds |
| Wattage | 25 watts |
| Power Source | Battery Powered (1200mAh) |
| Charging Interface | Type-C |
| Noise Level | Less than 30 dB |
10. Warranty and Support
If you encounter any problems during the use of your Bear YSJ-D05M1 Foldable Automatic Water Dispenser, please contact our customer support. We are committed to resolving your issues within 24 hours.
