EasyAcc 2-in-1 Dehumidifier and Air Purifier User Manual

1. Introduction

Thank you for choosing the EasyAcc 2-in-1 Dehumidifier and Air Purifier. This appliance is designed to reduce excess humidity in your indoor environment while simultaneously purifying the air. It is suitable for various spaces such as bedrooms, bathrooms, and basements, helping to protect your home from moisture damage and improve air quality. Please read this manual thoroughly before operating the device to ensure safe and efficient use.

2. Safety Instructions

To prevent injury to the user or others and property damage, the following instructions must be followed. Incorrect operation due to ignoring instructions may cause harm or damage.

• Always place the unit on a stable, level surface.
• Do not block the air inlet or outlet. Ensure at least 20 cm (8 inches) of space around the unit for proper airflow.
• Do not use the unit near water or in excessively wet environments where water might splash onto it.
• Unplug the unit before cleaning, performing maintenance, or when not in use for extended periods.
• Do not operate the unit with a damaged cord or plug. If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Do not insert fingers or foreign objects into the air inlet or outlet.
• Do not use chemical solvents (such as benzene, alcohol, gasoline) to clean the unit.
• Ensure the water tank is correctly installed before operating the unit.

3. Product Overview

3.1 Components

The EasyAcc Dehumidifier features a compact design with a user-friendly interface. Key components include the main unit, a detachable water tank, a control panel, and a convenient carrying handle.

Figure 1: EasyAcc Dehumidifier Main Unit

The unit incorporates dual semiconductor technology for efficient dehumidification and a built-in filter for air purification.

Figure 2: Internal Components (Dual Semiconductors, Filter, Condensation Sheet)

3.2 Control Panel and Display

The top of the unit features an LED digital touch display for easy control and real-time humidity monitoring. The display shows the current humidity level and various mode indicators.

Figure 3: Touch Control Panel

The control panel includes buttons for power, mode selection, timer, and light control.

4. Setup

1. Unpacking: Carefully remove the dehumidifier from its packaging. Retain packaging materials for future storage or transport.
2. Placement: Place the unit on a firm, level surface in the desired location. Ensure there is adequate space (at least 20 cm or 8 inches) around the air inlet and outlet for optimal performance. Avoid placing it directly against walls or furniture.
3. Power Connection: Plug the power adapter into the DC input port on the back of the dehumidifier, then plug the other end into a suitable electrical outlet.
4. Water Tank: Ensure the 100oz (3000ml) water tank is correctly inserted into the unit. The unit will not operate if the tank is not properly seated or is full.

5. Operating Instructions

5.1 Power On/Off

• Press the Power button () on the control panel to turn the unit ON or OFF.
• Upon powering on, the unit will automatically enter the Strong Mode.

5.2 Mode Selection

The dehumidifier offers three operating modes:

• Strong Mode: Provides powerful and efficient dehumidification for quickly reducing humidity.
• Night Mode: Operates at a lower fan speed for quieter operation, suitable for use during sleep. The noise level is less than 30dB.
• Auto Mode: The unit will automatically turn on or off based on your customized humidity setting. It will restart if the humidity exceeds the target range.

Press the Mode button () to cycle through the available modes.

Figure 4: Sleep Mode Operation

5.3 Humidity Setting

In Auto Mode, you can customize your desired humidity level. The humidity range is 40% to 70%.

• Press the Humidity Setting button () to adjust the target humidity. The digital display will show the current setting.
• The unit will operate to maintain the set humidity level.

5.4 Timer Function

The Smart Timer function allows you to preset the operation time from 2 to 48 hours.

• Press the Timer button () to set the desired operating duration.
• The unit will automatically turn off once the set time has elapsed.

5.5 Light Control

The unit features changeable lights, including a night light and colorful ambient lights.

• Press the Light button () to cycle through different light options or turn them off.

Figure 5: Changeable Light Options

5.6 Auto Shut-Off

The dehumidifier is equipped with a smart auto shut-off feature. When the 100oz (3000ml) water tank is full, the unit will automatically shut down and emit a red light as a reminder to empty the tank.

Figure 6: Water Tank Full Indicator

6. Maintenance

Regular maintenance ensures optimal performance and longevity of your dehumidifier.

6.1 Emptying the Water Tank

1. When the water tank is full, the unit will stop operating and a red light will illuminate.
2. Carefully pull out the water tank from the front of the unit.
3. Pour out the collected water.
4. Slide the empty water tank back into the unit until it clicks into place. The unit will resume operation if it was previously on.

6.2 Cleaning the Air Filter

The built-in filter helps trap fine particles and pollutants. Regular cleaning is recommended.

1. Turn off and unplug the dehumidifier.
2. Locate the rear filter cover. Gently remove it.
3. Remove the filter sheet.
4. Clean the filter with a soft brush or vacuum cleaner. For deeper cleaning, rinse it under running water. Ensure the filter is completely dry before reinserting.
5. Place the clean, dry filter back into its slot and reattach the cover.

Figure 7: Filter Maintenance and Hidden Handle

7. Troubleshooting

If you encounter issues with your EasyAcc Dehumidifier, please refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact EasyAcc Customer Service.

8. Specifications

9. Warranty and Customer Support

EasyAcc provides reliable customer service. If you have any questions about your dehumidifier, including operation of the touch control panel or any other concerns, please contact our customer support team. We are always ready to assist you.