1. Important Safety Information
Please read all instructions carefully before assembly and use. Failure to follow these instructions may result in injury or damage to the product.
- Handle Glass with Care: ESG glass is tempered for safety, but can still break if subjected to sharp impacts. Always wear appropriate safety gloves and eye protection when handling glass panels.
- Two-Person Assembly: Due to the size and weight of the door panel, assembly and installation require at least two people.
- Secure Mounting: Ensure the wall structure where the sliding door hardware will be mounted is strong enough to support the door's weight. Consult a professional if unsure.
- Proper Tools: Use only the recommended tools for assembly and installation.
- Children and Pets: Keep children and pets away from the assembly area.
- Check for Damage: Inspect all components for damage before beginning assembly. Do not proceed with assembly if any parts are damaged.
2. Package Contents
Verify that all components are present before starting assembly. If any parts are missing or damaged, contact customer support.
Image: Overview of the vidaXL Aluminum Sliding Door with ESG Glass.
The package typically includes:
- Aluminum frame components
- ESG glass panels (frosted effect)
- Assembly hardware (screws, connectors, gaskets)
- Instruction manual (this document)
Note: Sliding door hardware kits (track, rollers, handle) are sold separately and are required for installation. This manual focuses on the door panel assembly.
3. Setup and Installation
This section outlines the general steps for assembling the door panel and preparing for installation with a compatible sliding door hardware kit.
3.1. Pre-Installation Checks
- Measure Opening: Ensure your door opening is compatible with the door dimensions (35.4" W x 80.7" H).
- Gather Tools: You will need a screwdriver, measuring tape, level, drill, and safety equipment.
- Clear Area: Prepare a clean, flat, and spacious area for assembly.
Image: Detailed dimensions of the door panel (35.4" W x 80.7" H, 1.6" door thickness, 0.2" glass thickness).
3.2. Door Panel Assembly
- Unpack all components and lay them out on a protective surface.
- Assemble the aluminum frame according to the specific diagrams provided with your hardware. Ensure all connections are secure.
- Carefully insert the ESG glass panels into the designated frame slots. Ensure the frosted side faces the desired direction.
- Secure the glass panels using the provided gaskets and retaining strips/screws. Do not overtighten.
- Verify the door panel is square and stable.
3.3. Installation with Sliding Door Hardware
Refer to the instruction manual provided with your specific sliding door hardware kit for detailed installation steps. The vidaXL door panel is designed to be compatible with various standard kits.
- Install the sliding track above the door opening, ensuring it is level and securely fastened to wall studs or appropriate anchors.
- Attach the rollers/hangers to the top edge of the assembled door panel.
- Carefully lift and hang the door panel onto the installed track. This step requires two people.
- Install floor guides and anti-jump discs as per your hardware kit instructions to ensure smooth and safe operation.
- Test the door's movement to ensure it slides smoothly and quietly. Adjust as necessary.
Image: Example of the vidaXL Aluminum Sliding Door installed in a room.
4. Operating Instructions
The vidaXL Aluminum Sliding Door is designed for smooth and effortless operation.
- Opening and Closing: Gently push or pull the door panel along its track. Avoid excessive force.
- Handle Use: If a handle is installed, use it to guide the door.
- Clear Path: Ensure the path of the door is clear of obstructions to prevent damage to the door or surrounding area.
- Frosted Glass: The frosted ESG glass provides privacy while allowing light to pass through.
5. Maintenance
Regular maintenance will ensure the longevity and optimal performance of your sliding door.
5.1. Cleaning the Glass Panels
- Use a soft, lint-free cloth and a mild glass cleaner or a mixture of water and vinegar.
- Spray the cleaner onto the cloth, not directly onto the glass, to avoid streaks and drips into the frame.
- Wipe the glass panels gently. For the frosted surface, wipe in one direction to maintain its appearance.
- Avoid abrasive cleaners or harsh chemicals, as these can damage the glass or the frosted finish.
5.2. Cleaning the Aluminum Frame
- Wipe the aluminum frame with a soft cloth dampened with mild soap and water.
- Dry thoroughly with a clean, soft cloth to prevent water spots.
- Avoid abrasive materials or strong chemical cleaners that could scratch or corrode the aluminum finish.
Image: Close-up view of the aluminum frame and ESG glass detail.
5.3. Hardware Maintenance
- Periodically check all screws and fasteners on the door panel and sliding hardware for tightness. Tighten if necessary.
- Keep the sliding track clean and free of dust and debris. A vacuum cleaner can be used to remove accumulated dirt.
- If the door's movement becomes stiff or noisy, apply a silicone-based lubricant (not oil-based) to the rollers and track as recommended by your sliding hardware manufacturer.
6. Troubleshooting
This section addresses common issues you might encounter with your sliding door.
| Problem | Possible Cause | Solution |
|---|---|---|
| Door does not slide smoothly | Dirty track, misaligned rollers, loose hardware. | Clean the track, check roller alignment, tighten all hardware. Lubricate rollers/track if necessary. |
| Door makes noise when sliding | Lack of lubrication, debris in track, worn rollers. | Clean and lubricate the track and rollers. Inspect rollers for wear and replace if damaged. |
| Door is difficult to open/close | Obstruction in the path, misaligned track, damaged floor guide. | Remove any obstructions. Check track alignment with a level. Inspect and adjust or replace the floor guide. |
| Glass appears loose in frame | Loose retaining strips or gaskets. | Gently tighten retaining screws or re-seat gaskets. Do not overtighten. |
If you encounter issues not listed here or if solutions do not resolve the problem, please contact vidaXL customer support.
7. Specifications
Key technical specifications for the vidaXL Aluminum Sliding Door (Model 288065).
| Feature | Detail |
|---|---|
| Model Number | 288065 |
| Overall Dimensions (W x H) | 35.4 inches x 80.7 inches (90 cm x 205 cm) |
| Door Thickness | 1.6 inches (4 cm) |
| Glass Thickness | 0.2 inches (0.5 cm) |
| Material | Aluminum frame, ESG (tempered safety) glass with frosted effect |
| Color | Black frame |
| Item Weight | 70.9 pounds (32.24 kg) |
| Assembly Required | Yes |
| Compatibility | Compatible with various sliding door hardware kits (sold separately) |
8. Warranty Information
vidaXL products are manufactured to high-quality standards and are covered by a limited warranty against manufacturing defects. The specific warranty period and terms may vary by region and product type.
Please retain your proof of purchase for warranty claims. For detailed warranty information, refer to the warranty card included with your product or visit the official vidaXL website.
This warranty does not cover damage caused by improper installation, misuse, neglect, accidents, alterations, or normal wear and tear.
9. Customer Support
If you have any questions, require assistance with assembly, or need to report a missing or damaged part, please contact vidaXL customer support.
- Online Support: Visit the official vidaXL website for FAQs, support articles, and contact forms.
- Email: Refer to your purchase documentation for the appropriate customer service email address.
- Phone: Check the vidaXL website for regional customer service phone numbers.
When contacting support, please have your product model number (288065) and proof of purchase readily available.
