Tengsun 14-42 Inch TV Monitor Wall Mount Bracket

Introduction

This manual provides detailed instructions for the safe and proper installation and use of your Tengsun TV Monitor Wall Mount Bracket. Please read this manual thoroughly before installation and retain it for future reference. This bracket is designed to securely mount LED, LCD, and OLED screens ranging from 14 to 42 inches, with VESA compatibility for 75x75mm, 100x100mm, and 200x200mm patterns, supporting a maximum weight of 40 lbs.

Safety Information

• Ensure the mounting surface can safely support the combined weight of the mount and your television.
• Do not exceed the maximum weight capacity of 40 lbs (18.1 kg).
• Use appropriate tools and follow all installation steps carefully to prevent injury or damage.
• If you are unsure about any part of the installation process, consult a qualified professional.
• Keep all small parts and packaging materials away from children.
• This product is intended for indoor use only.

Package Contents

Before beginning installation, please verify that all components are present and undamaged.

• Wall Mount Bracket (Main Frame)
• TV Mounting Arms (2 pieces)
• Mounting Hardware Kit (various screws, anchors, washers)
• User Manual (this document)

This diagram illustrates the key dimensions of the wall mount bracket, including its overall width of 11.4 inches, height of 8.66 inches, and the 1.18-inch width of the wall plate. It also indicates a carrying capacity of 55 lbs, applicable TV sizes from 14 to 42 inches, and VESA compatibility for 75x75, 100x100, and 200x200 patterns.

Setup and Installation

Follow these steps carefully to install your TV wall mount bracket.

Step 1: Prepare the Wall

• Locate a suitable mounting position on a solid wall (concrete or wood stud). Avoid mounting into drywall alone.
• Use a stud finder to accurately locate the center of wood studs if applicable.
• Mark the drilling points for the wall plate using a pencil and a level to ensure accuracy.

Step 2: Mount the Wall Plate

• Drill pilot holes at the marked locations. The drill bit size will depend on your wall type and the anchors provided.
• Insert wall anchors into the pilot holes if mounting into concrete or drywall without a stud.
• Secure the wall plate to the wall using the provided screws. Ensure it is firmly attached and level.

Step 3: Attach TV Mounting Arms to TV

• Identify the VESA mounting holes on the back of your TV.
• Select the appropriate screws and spacers from the hardware kit that fit your TV's VESA pattern.
• Attach the two TV mounting arms to the back of your TV. Ensure they are oriented correctly (hooks facing upwards) and securely fastened.

This image highlights the tilting functionality of the wall mount and its compatibility with various VESA mounting patterns, including 75x75mm, 100x100mm, and 200x200mm, suitable for TVs ranging from 14 to 42 inches.

Step 4: Hang TV on Wall Plate

• With assistance, carefully lift the TV with the attached mounting arms.
• Hook the TV mounting arms onto the top edge of the wall plate.
• Gently lower the TV until it is securely seated and locked into place on the wall plate.
• Ensure the TV is stable before releasing it.

This image demonstrates the ultra-thin design of the TV stand, showing how it positions the television approximately 2 inches from the wall, allowing for a sleek, space-saving installation.

Operating Instructions

Your Tengsun TV Monitor Wall Mount Bracket allows for convenient tilting adjustments to optimize your viewing experience.

Adjusting Tilt

• To adjust the tilt angle, locate the tilt adjustment screws on the side of the TV mounting arms.
• Loosen these screws slightly to allow the TV to pivot.
• Gently tilt the TV to the desired upward or downward angle.
• Once the desired angle is achieved, tighten the tilt adjustment screws firmly to secure the TV in position.

Maintenance

Proper maintenance ensures the longevity and safe operation of your wall mount.

• Periodically (e.g., every 6 months) check all screws and connections to ensure they remain tight. Retighten if necessary.
• Clean the mount with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or chemical-based cleaning products, as these may damage the finish.
• Do not hang objects from the mount or the television, as this can exceed the weight capacity and cause damage or injury.

Troubleshooting

If you encounter issues during or after installation, refer to the following common problems and solutions.

Problem: TV is not level

• Solution: Check if the wall plate is level. If not, carefully loosen the wall screws, adjust the wall plate using a level, and retighten. Also, ensure the TV mounting arms are attached evenly to the TV.

Problem: TV feels unstable or sags

• Solution: Verify that all screws securing the mount to the wall and the TV to the arms are securely tightened.
• Solution: Confirm that the wall anchors (if used) are properly installed and holding firmly. If mounting into drywall without a stud, consider relocating to a stud or using heavy-duty toggle anchors.
• Solution: Ensure the TV's weight does not exceed the mount's maximum capacity of 40 lbs.

Specifications

Warranty Information

This product is covered by a manufacturer's warranty. For detailed information regarding warranty terms, conditions, and duration, please refer to the product packaging or contact Tengsun customer support directly. Keep your proof of purchase for warranty claims.

Customer Support

For technical assistance, inquiries about missing parts, or warranty support, please contact Tengsun customer service. Our team is ready to assist you.

• Email: support@tengsun.com (Example)
• Phone: 1-800-123-4567 (Example)
• Website: www.tengsun.com (Example)

When contacting support, please have your product model number (14-42 Inch TV Monitor Wall Mount Bracket) and purchase date readily available to expedite service.