Introduction
Thank you for choosing the KERBL 12L Poultry Waterer. This manual provides essential information for the safe and efficient use of your product. Please read it thoroughly before assembly and operation to ensure proper function and longevity of the waterer.
Product Overview
The KERBL 12L Poultry Waterer is designed to provide a reliable and consistent water source for various poultry, including chickens and chicks. Its robust construction and automatic water supply mechanism ensure your flock remains hydrated with minimal effort.
Key Features:
- Suitable for chickens and chicks.
- Constructed from solid, durable plastic.
- Designed for easy maintenance and cleaning.
- Equipped with a carrying handle for convenient transport and automatic water supply.
- Made from very robust PVC material.
Figure 1: The KERBL 12L Poultry Waterer, featuring a red lid and base with a white bucket, designed for easy carrying and stable placement.
Figure 2: The KERBL 12L Poultry Waterer in use, surrounded by several chickens drinking from its base, demonstrating its practical application in a poultry environment.
Setup Instructions
The waterer is supplied in components for assembly. No special tools are required for this process.
- Unpack Components: Carefully remove all parts from the packaging. You should have the main bucket, the red lid, the red base with integrated legs, and the carrying handle.
- Attach the Base: Securely attach the red base to the bottom of the white bucket. Ensure that the connection is firm and stable. The base is designed to elevate the waterer and provide a drinking trough.
- Install Carrying Handle: Insert the ends of the red carrying handle into the designated slots on the upper rim of the bucket. Ensure it clicks into place securely.
- Place the Lid: Position the red lid on top of the bucket, ensuring it fits snugly to protect the water from contaminants.
- Positioning: Place the assembled waterer on a perfectly flat and stable surface. This is crucial to prevent tipping and to ensure the automatic water dispensing mechanism functions correctly without leakage.
Operating Instructions
Using your KERBL Poultry Waterer is straightforward:
- Filling the Waterer: Remove the red lid from the top of the bucket. Pour clean, fresh water directly into the bucket. The water will automatically flow into the drinking trough at the base as needed, regulated by an internal float mechanism.
- Capacity: The 12-liter capacity allows for an extended water supply, reducing the frequency of refills, depending on the size and number of your poultry.
- Monitoring: Regularly check the water level in the bucket and the cleanliness of the water in the drinking trough. Refill with fresh water as necessary.
Maintenance
Proper maintenance ensures the longevity and hygienic operation of your poultry waterer.
- Regular Cleaning: To maintain hygiene and prevent bacterial growth, clean the waterer frequently. Disassemble the lid, bucket, and base. Wash all components thoroughly with warm water and a mild, non-toxic detergent safe for animal use. Rinse all parts completely to remove any soap residue before reassembly.
- Material Care: The waterer is constructed from robust PVC plastic. While durable, prolonged exposure to direct sunlight can degrade plastic over time. Consider placing the waterer in a shaded area to extend its lifespan.
- Leak Prevention: Periodically inspect the seals and connections between the bucket and the base. If you observe any leakage, ensure all parts are correctly assembled and tightened. For persistent leaks, particularly around the internal float mechanism, some users have found success by carefully applying a food-safe silicone sealant to reinforce the watertightness.
Troubleshooting
Here are solutions to common issues you might encounter:
- Water Leaks or Drains Completely:
Issue: The waterer empties itself or leaks continuously from the base.
Solution: This is often caused by an uneven surface. Ensure the waterer is placed on a perfectly level and stable ground. Even a slight tilt can cause the automatic valve to malfunction and release all the water. Also, check that all components are securely fastened and that the internal float mechanism is not obstructed or damaged. Applying a food-safe silicone seal around the float mechanism has been reported by some users to resolve persistent leaks.
- Drinking Trough Not Filling:
Issue: The drinking trough at the base remains empty or fills very slowly.
Solution: First, ensure the main bucket is filled with water. Then, check for any blockages in the valve mechanism or the small opening that allows water to flow from the bucket into the trough. Clean any debris, feed particles, or sediment that may be obstructing the water flow.
- Water Contamination:
Issue: Water in the trough becomes dirty quickly.
Solution: While the elevated design helps reduce contamination, poultry can still introduce dirt or feed into the water. Regular and thorough cleaning of all components is essential. Consider relocating the waterer to an area less prone to dust, dirt, or droppings.
Specifications
| Attribute | Detail |
|---|---|
| Brand | KERBL |
| Model Number | 71120 |
| Capacity | 12 Liters |
| Material | Plastic (PVC) |
| Color | Red and White |
| Product Dimensions (L x W x H) | 43 x 42 x 31 cm |
| Item Weight | 2.22 kg (4.89 Pounds) |
| Power Source | Manual operation (filling) |
| Recommended Animal Age | Adult |
Warranty and Support
For specific warranty information, terms, and conditions, please refer to the documentation provided at the time of purchase or contact the retailer directly. Keep your proof of purchase for any warranty claims.
For further assistance or technical support, please contact KERBL customer service through their official website or the contact information provided by your retailer.
