HOLOSUN HE507COMP / HS507COMP Reflex Pistol Sight User Manual

1. Introduction

This manual provides comprehensive instructions for the proper use, setup, operation, and maintenance of your HOLOSUN HE507COMP / HS507COMP Reflex Pistol Sight. Designed for enhanced shooting performance, this sight features a large objective lens, the innovative Competition Reticle System (CRS), and durable construction. Please read this manual thoroughly before using the product to ensure safe and optimal performance.

Figure 1: Front view of the HOLOSUN HS507COMP Reflex Pistol Sight, showcasing its large objective lens and robust housing.

2. Key Features

• Large Objective Lens: The sight features a 1.1" x 0.87" objective lens, providing a wide field of view for quick target acquisition and improved situational awareness.
• Competition Reticle System (CRS): Equipped with Holosun's advanced CRS, this sight offers multiple reticle options including a precision 2 MOA dot, an 8 MOA circle, a 20 MOA circle, and a 32 MOA circle. These can be combined to suit various shooting preferences and scenarios.
  

  Figure 2: Illustration of the Competition Reticle System (CRS) showing available reticle patterns in both green and red options.

• Shake Awake Technology: This power-saving feature deactivates the optic's LED when the sight is not in use, extending battery life. The slightest motion instantly reactivates the LED, ensuring the sight is ready when needed. Settings for deactivation time can be adjusted or the feature can be turned off.
• Multilayer Reflective Glass: Optical-quality glass lenses with multilayer coatings are used to maximize light transmission, reduce glare, and enhance wear resistance. These coatings contribute to industry-leading reticle intensity, clarity, and battery efficiency.
• Durable Construction: The sight housing is crafted from 7075 T6 Aluminum with an anodized finish, providing robust protection and a lightweight design suitable for handgun applications.
• Long Battery Life: Utilizes a CR1632 battery, offering up to 50,000 hours of operation depending on usage and settings.

3. Setup

3.1 Battery Installation

The HS507COMP sight uses one CR1632 battery. To install or replace the battery:

1. Locate the battery tray on the side of the sight.
2. Using a small flat-head screwdriver or the included tool, unscrew the battery tray cover.
3. Insert the CR1632 battery with the positive (+) side facing up.
4. Carefully replace the battery tray cover and screw it in securely to ensure a watertight seal.

Figure 3: Side view of the sight, indicating the location of the battery tray for CR1632 battery installation.

3.2 Mounting the Sight

The HS507COMP utilizes an industry-standard footprint for mounting. Ensure your firearm's slide or mounting plate is compatible with this footprint. Use appropriate screws and torque specifications as recommended by your firearm or mounting plate manufacturer to secure the sight firmly.

Figure 4: Bottom view of the sight, illustrating the mounting interface and screw holes for secure attachment to a compatible firearm or plate.

4. Operating Instructions

4.1 Power On/Off

To power on the sight, press either the "+" or "-" button. To power off, press and hold both the "+" and "-" buttons simultaneously for approximately 3 seconds.

4.2 Brightness Adjustment

Press the "+" button to increase brightness and the "-" button to decrease brightness. The sight offers multiple brightness settings to adapt to various lighting conditions, from night vision compatible to bright daylight.

Figure 5: Top view of the sight, highlighting the "+" and "-" buttons used for adjusting reticle brightness.

4.3 Reticle Selection

To cycle through the available reticle options (2 MOA Dot, 8 MOA Circle, 20 MOA Circle, 32 MOA Circle, and combinations), press and hold the "-" button for approximately 3 seconds. Release the button to select the desired reticle.

4.4 Windage and Elevation Adjustment

The sight features windage and elevation adjustment turrets. Each click adjusts the point of impact by 1 MOA. Use a small flat-head screwdriver or the included tool to make adjustments. The total adjustment range is ±30 MOA for both windage and elevation.

Figure 6: Front view of the sight, showing the elevation adjustment dial. Windage adjustment is located on the side.

5. Maintenance

Proper maintenance ensures the longevity and performance of your HOLOSUN sight.

• Cleaning the Lenses: Use a soft, clean microfiber cloth to gently wipe the lenses. For stubborn smudges, a small amount of lens cleaning solution designed for optics can be applied to the cloth, not directly to the lens. Avoid using abrasive materials or harsh chemicals.
• Cleaning the Housing: Wipe the aluminum housing with a damp cloth to remove dirt and debris. Dry thoroughly.
• Battery Check: Periodically check the battery compartment for corrosion. Replace the battery as needed, especially before critical use.
• Storage: When not in use for extended periods, store the sight in a cool, dry place, preferably in its original packaging or a protective case.

6. Troubleshooting

7. Specifications

• Reticle: Red 2 MOA Dot & 8/20/32 MOA Circle
• Light Wavelength: 650nm
• Magnification: 1x
• Eye Relief: Unlimited
• Parallax: Parallax Free
• Power Source: Battery (CR1632)
• Battery Life: Up to 50,000 hours
• Window Size: 1.1" x 0.87"
• Housing Material: 7075 T6 Aluminum
• Surface Finish: Anodize
• Adjustment per Click: 1 MOA
• Windage & Elevation Travel Range: ±30 MOA
• Item Weight: 1.76 ounces
• Item Dimensions (LxWxH): 1.8 x 1.3 x 1.3 inches

8. Warranty and Support

HOLOSUN provides a Lifetime warranty against manufacturer defects for this product. For warranty claims, technical support, or additional product information, please visit the official HOLOSUN Store or contact their customer service directly.

Official HOLOSUN Store: Visit Store