Locksworth ET551 Electronic Digital Keypad Safe User Manual

Introduction

Thank you for choosing the Locksworth ET551 Electronic Digital Keypad Safe. This manual provides essential information for the proper setup, operation, and maintenance of your safe. Please read these instructions carefully before use to ensure optimal security and functionality. Keep this manual for future reference.

Important Safety Information

• Do not store emergency keys inside the safe. Keep them in a secure, separate location.
• Ensure the safe is placed on a stable, level surface or securely mounted to a wall or floor to prevent tipping.
• Keep the keypad dry and clean. Avoid using abrasive cleaners.
• Replace batteries promptly when the low battery indicator appears to avoid being locked out.
• Do not attempt to force the safe open if the electronic system fails. Use the emergency key.

Package Contents

Verify that all components are present in the package:

• Locksworth ET551 Safe Unit
• 2 x Emergency Keys
• 1 x External Battery Box
• 2 Sets of Expansion Bolts (for mounting)
• 4 x AA Batteries
• Floor Protectors
• User Manual (this document)

Image: Included accessories for the Locksworth ET551 safe, showing emergency keys, mounting bolts, floor protectors, AA batteries, external battery box, internal light, and password reset button.

Product Features

• Dual Unlocking Methods: Electronic digital keypad and mechanical emergency key.
• SOTER Hub Structure: Enhanced anti-prying resistance with even force distribution among door locks.
• Solid Steel Locking Bolts: Four 25mm thick bolts designed to resist cutting and prying.
• Phosphating Treatment: 18-step surface treatment for rust prevention, oxidation resistance, and improved paint adhesion.
• Dual Alarm System: Triggers a 50-second high-decibel alarm upon unusual vibrations or three consecutive incorrect password attempts.
• Adjustable/Removable Shelf: For flexible organization of contents.
• Internal LED Light: Illuminates the interior for visibility.
• Key/Jewelry Hooks: Convenient storage for small items.
• Durable Construction: Alloy steel body with a wrinkle powder coating and round chamfer design.

Image: Visual representation of the safe's security features, including resistance to drilling, solid locking bolts, and anti-prying design.

Image: Interior features of the safe, highlighting the removable shelf, sensor light, felt carpet lining, and key/jewelry hooks.

Image: Exterior design elements of the safe, showcasing the round chamfered edges, wrinkle powder coating, and unique keypad panel.

Setup Guide

1. Initial Opening and Battery Installation

1. Locate the emergency keyhole, usually concealed behind a plastic cover on the keypad panel.
2. Remove the plastic cover.
3. Insert one of the emergency keys into the keyhole and turn it counter-clockwise.
4. While the key is turned, rotate the knob clockwise to open the safe door.
5. Inside the safe, locate the battery compartment on the back of the door.
6. Insert the 4 AA batteries provided, ensuring correct polarity (+/-).
7. Close the battery compartment.

2. Mounting the Safe

For enhanced security, it is recommended to mount the safe to a wall or floor using the provided expansion bolts.

1. Choose a suitable location for mounting, ensuring it is a solid surface (e.g., concrete wall, wooden stud, or floor).
2. Open the safe door and locate the pre-drilled mounting holes on the back or bottom panel.
3. Position the safe and mark the drilling points on the wall or floor through the mounting holes.
4. Drill pilot holes at the marked points using an appropriate drill bit size for the expansion bolts.
5. Align the safe with the drilled holes.
6. Insert the expansion bolts through the safe's mounting holes and into the wall/floor.
7. Tighten the bolts securely until the safe is firmly attached. Do not overtighten.

Image: Illustrated steps for securely mounting the safe to a wall using expansion bolts.

Operating Instructions

1. Setting/Changing the Passcode

The default passcode is 12345678. It is highly recommended to change this immediately after battery installation.

1. With the safe door open, press the red reset button located on the inside of the door (usually near the hinge or battery compartment). The indicator light on the keypad will flash.
2. Enter your desired new passcode (3-8 digits) on the keypad.
3. Press the '#' button to confirm. The indicator light will stop flashing, indicating the new passcode is set.
4. Test the new passcode with the door open before closing it.

2. Opening the Safe with Passcode

1. Enter your personal passcode on the digital keypad.
2. Press the '#' button. The indicator light will turn green.
3. Within 5 seconds, turn the knob clockwise to open the safe door.

3. Opening the Safe with Emergency Key

This method is used if you forget your passcode or if the batteries are depleted.

1. Remove the plastic cover over the emergency keyhole on the keypad panel.
2. Insert an emergency key and turn it counter-clockwise.
3. While the key is turned, rotate the knob clockwise to open the safe door.

4. Using the External Battery Box

If the internal batteries are depleted and you cannot open the safe with the passcode, use the external battery box.

1. Insert 4 AA batteries into the external battery box (ensure correct polarity).
2. Plug the external battery box cable into the emergency power port, usually located near the emergency keyhole or under the keypad.
3. Enter your passcode on the keypad and press '#'.
4. Turn the knob clockwise to open the safe.
5. Once open, replace the internal batteries immediately.

5. Dual Alarm System

The safe is equipped with a dual alarm system to deter unauthorized access.

• Vibration Alarm: If the safe experiences unusual vibrations or attempts to move it, a high-decibel alarm will sound for 50 seconds.
• Incorrect Passcode Alarm: If three consecutive incorrect passcode attempts are made, a high-decibel alarm will sound for 50 seconds.
• To silence the alarm, enter the correct passcode or use the emergency key to open the safe.

Image: Illustrates the three methods of opening the safe: Method 1 (passcode entry and knob turn), Method 2 (emergency key turn and knob turn), and Method 3 (external battery box connection, passcode entry, and knob turn). It also shows the default password.

Maintenance

1. Battery Replacement

When the low battery indicator lights up, replace all 4 AA batteries promptly to ensure continuous operation.

1. Open the safe door.
2. Locate the battery compartment on the back of the door.
3. Remove the old batteries and dispose of them responsibly.
4. Insert 4 new AA alkaline batteries, ensuring correct polarity.
5. Close the battery compartment.

2. Cleaning

Wipe the safe's exterior with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners that could damage the finish or keypad.

3. Rust Prevention

The safe features a phosphating treatment for rust prevention. To maintain this protection, avoid exposing the safe to excessive moisture or corrosive environments. If the safe gets wet, dry it thoroughly immediately.

Troubleshooting

• Safe does not open with passcode:
  Solution: Ensure batteries are not depleted. Replace them if necessary. Double-check that the correct passcode is entered. If still unsuccessful, use the emergency key.
• Keypad is unresponsive:
  Solution: Check battery levels. If batteries are new, ensure they are inserted with correct polarity. If the issue persists, use the external battery box or emergency key.
• Alarm sounds unexpectedly:
  Solution: The alarm may be triggered by strong vibrations or incorrect passcode attempts. Enter the correct passcode or use the emergency key to disarm.
• Door does not close properly:
  Solution: Ensure no objects are obstructing the door or locking bolts. Check if the safe is on a level surface.

Specifications

Image: Diagram showing the exterior dimensions (15"D x 12.6"W x 17.7"H) and door thickness of the 1.9 cubic feet safe.

Warranty Information

Locksworth products are manufactured to high-quality standards. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your purchase or contact customer support for specific warranty terms and conditions.

Customer Support

If you have any questions, require assistance with setup, or encounter any issues with your Locksworth ET551 safe, please contact our customer support team. Refer to the contact information provided on the product packaging or the Locksworth official website for the most up-to-date support details.