VASAGLE ULDC170K01 Round Dining Chair Stool Instruction Manual

1. Introduction

Thank you for choosing the VASAGLE ULDC170K01 Round Dining Chair Stool. This manual provides essential information for the safe assembly, operation, and maintenance of your new stool. Please read these instructions carefully before use and retain them for future reference.

This stool, recognized with the Bronze A' Design Award 2024, combines synthetic leather with refined stitching, offering a stylish addition to any home. It features a comfortable 3.1-inch thick 58D molded foam seat and sturdy steel legs with swivel leveling feet for stability.

2. Safety Information

WARNING:

Exceeding the maximum weight limit of 265 pounds (120 kg) or using the stool on an uneven surface can increase the risk of tipping or instability, potentially causing accidents or injuries.
Always adhere to the weight limit and assembly instructions to ensure safe use.

Ensure all parts are securely fastened before use. Regularly check and tighten all screws and bolts to maintain stability.

3. Package Contents

Please verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

1 x Stool Seat (with synthetic leather upholstery)
1 x Leg Frame (steel)
Assembly Hardware (screws, washers, Allen key)

4. Assembly Instructions

The assembly process for this stool is straightforward. Follow these steps to assemble your stool:

Carefully unpack all components and lay them out on a clean, soft surface to prevent scratches.
Attach the stool seat to the leg frame using the provided screws and Allen key. Ensure all screws are aligned with the pre-drilled holes.
Tighten all screws firmly, but do not overtighten.
Once assembled, place the stool upright. Adjust the swivel leveling feet on the bottom of each leg to ensure the stool is stable and does not wobble on uneven floors.

Diagram illustrating the assembly process of the stool, showing how the seat attaches to the leg frame, and how to adjust the swivel leveling feet for stability. — **Figure 4.1:** Assembly steps and adjustment of leveling feet.

Detail view of the stool's robust steel legs and adjustable swivel leveling feet designed for stability on uneven surfaces. — **Figure 4.2:** Close-up of sturdy steel legs and swivel leveling feet.

5. Operating Instructions

The VASAGLE ULDC170K01 stool is designed for comfortable seating in various settings, including dining areas, living rooms, bedrooms, and studies.

Seating: Sit centrally on the stool to distribute weight evenly.
Weight Capacity: Do not exceed the maximum static load capacity of 265 lbs (120 kg).
Placement: This stool is designed to fit perfectly under most dining tables or in narrow spaces, making it a versatile seating solution.

Diagram showing the dimensions of the VASAGLE ULDC170K01 stool and its maximum static load capacity of 265 lbs (120 kg). — **Figure 5.1:** Stool dimensions and maximum load capacity.

Cross-section diagram of the stool seat showing layers: synthetic leather, 3.1 inch (8 cm) 58D molded foam, thick plywood, and non-woven fabric. — **Figure 5.2:** Detailed view of the comfortable seat construction.

6. Maintenance

To ensure the longevity and appearance of your VASAGLE stool, follow these maintenance guidelines:

Cleaning: Wipe the stool with a damp cloth. For spills, clean immediately with a soft, dry cloth. Avoid harsh chemicals or abrasive cleaners that may damage the synthetic leather.
Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
Protection: Avoid prolonged exposure to direct sunlight or extreme temperatures, which can cause the material to fade or crack.

Close-up view of the stool's richly textured synthetic leather and classic, exquisite stitching detail. — **Figure 6.1:** The synthetic leather surface is easy to clean with a damp cloth.

7. Troubleshooting

If you encounter any issues with your stool, refer to the following common solutions:

Stool wobbles: Check if all screws are tightened. Adjust the swivel leveling feet on the bottom of each leg until the stool is stable on the floor.
Loose parts: If any parts feel loose, re-tighten the corresponding screws using the provided Allen key. Do not overtighten.
Difficulty assembling: Ensure you are following the assembly steps in the correct order. Verify that all components are correctly oriented before tightening screws. Refer to the assembly diagram in Section 4.

If problems persist, please contact customer support for further assistance.

8. Specifications

Feature	Detail
Model Number	ULDC170K01
Brand	VASAGLE
Color	Caramel Brown
Product Dimensions (D x W x H)	48 x 48 x 48.3 cm (18.9 x 18.9 x 19 inches)
Item Weight	2.5 kg (5.5 lbs)
Maximum Recommended Weight	120 kg (265 lbs)
Material	Steel, 58D molded foam, synthetic leather, plywood
Frame Material	Steel
Seat Material Type	Synthetic Leather
Assembly Required	Yes
Care Instructions	Wipe with a damp cloth

9. Warranty and Support

Your VASAGLE ULDC170K01 stool comes with a standard return policy. For specific details regarding returns or extended warranty options, please refer to your purchase documentation or the retailer's website.

Return Policy: Typically 30 days for refund/replacement. Please check with your retailer for exact terms.
Extended Protection Plans: Additional protection plans may be available for purchase, offering extended coverage for 2, 3, or 4 years.
Customer Support: For further assistance, product inquiries, or to report missing/damaged parts, please visit the official VASAGLE store or contact your retailer's customer service. You can find more products and information at the VASAGLE Brand Store.