Introduction
The DJI Osmo Pocket 3 Battery Handle is designed to significantly extend the operating time of your Osmo Pocket 3 camera. Featuring a built-in 950mAh battery, it can increase the camera's operating duration by approximately 62%. This accessory also includes a USB-C port for connecting external audio devices and a 1/4-inch thread for mounting on tripods or other accessories, enhancing your overall user experience.
Figure 1: DJI Osmo Pocket 3 Battery Handle, providing extended power and additional connectivity.
Setup
Attaching the Battery Handle
- Ensure your Osmo Pocket 3 is powered off.
- Align the USB-C connector of the Battery Handle with the USB-C port at the bottom of the Osmo Pocket 3.
- Gently push the Battery Handle upwards until it clicks securely into place. The connection is designed for hot-swapping, allowing seamless attachment.
Figure 2: Demonstrating the attachment of the Battery Handle to the Osmo Pocket 3.
Detaching the Battery Handle
- Press and hold the release button located on the side of the Battery Handle.
- While holding the button, gently pull the Battery Handle downwards to detach it from the Osmo Pocket 3.
Initial Charging
Before first use, it is recommended to fully charge the Battery Handle. Connect a USB-C charging cable to the USB-C port on the back of the handle. The indicator light will show charging status.
Figure 3: Rear view of the Battery Handle, highlighting the USB-C charging port.
Video Guide: Attaching the Battery Handle
Video 1: A seller demonstrates how to attach the Battery Handle to the DJI Osmo Pocket 3, showing the secure connection process.
Operating
Extended Operating Time
When connected, the Battery Handle's 950mAh capacity extends the Osmo Pocket 3's operating time by approximately 62%. The Osmo Pocket 3's display will show the battery levels for both the camera and the attached handle.
External Audio Devices
The USB-C port on the back of the Battery Handle can be used to connect external audio devices such as digital wired headphones, wired microphones, or wireless microphone receivers. This allows for enhanced audio recording capabilities without needing additional adapters for the camera itself.
Tripod and Accessory Mounting
A 1/4-inch thread is located at the bottom of the Battery Handle. This allows you to securely attach the Osmo Pocket 3 with the handle to tripods, monopods, or other compatible accessories, providing stable shooting options.
Video 2: A seller highlights how the Battery Handle extends the recording time of the Osmo Pocket 3, demonstrating its practical use.
Video 3: A seller discusses the Battery Handle as a power backup solution for video recording, emphasizing its utility.
Maintenance
To ensure optimal performance and longevity of your DJI Osmo Pocket 3 Battery Handle, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to wipe the exterior of the Battery Handle. Avoid using harsh chemicals or abrasive materials.
- Storage: Store the Battery Handle in a cool, dry place away from direct sunlight and extreme temperatures.
- Charging: Fully charge the battery at least once every three months if not in regular use to prevent deep discharge.
- Connector Care: Keep the USB-C connector clean and free of dust or debris to ensure proper connection and charging.
Troubleshooting
If you encounter issues with your DJI Osmo Pocket 3 Battery Handle, consider the following:
- Not Charging: Ensure the USB-C cable and power adapter are functioning correctly. Try a different cable or adapter. Verify the connection is secure.
- Not Connecting to Osmo Pocket 3: Ensure the Battery Handle is correctly aligned and clicked into place. Check for any obstructions in the USB-C ports on both devices.
- Battery Level Not Displaying: If the battery level is not shown on the Osmo Pocket 3 screen, detach and reattach the handle. Ensure both devices are powered on.
- Loose Connection: If the handle feels loose, ensure it is fully clicked into place. If the issue persists, inspect the locking mechanism for damage.
For persistent issues, please refer to the official DJI support resources.
Specifications
| Feature | Specification |
|---|---|
| Product Dimensions | 1.32 x 1.1 x 2.76 inches |
| Item Weight | 2.33 ounces (0.07 Kilograms) |
| Batteries | 1 C batteries required (included) |
| Compatible Devices | Osmo Pocket 3 |
| Item Model Number | CP.OS.00000304.01 |
| UPC | 190021094932 |
Warranty and Support
For warranty information and technical support, please refer to the official DJI website or contact DJI customer service directly. Keep your purchase receipt and product serial number (CP.OS.00000304.01) handy for any inquiries.
