Product Overview
The MABIS Digital Premium Wrist Blood Pressure Monitor is designed for easy and accurate home monitoring of blood pressure, pulse rate, and detection of irregular heartbeats. This device helps users track variations in blood pressure, which is crucial for identifying potential health risks such as heart attack, stroke, or fatigue. It stores up to 120 readings for two users, providing a comprehensive record of your health data.
Image: Front view of the MABIS Digital Premium Wrist Blood Pressure Monitor, showing the display with blood pressure readings, pulse rate, time, and date. The device is white with blue buttons for 'M' (Memory) and Power.
Important Safety Information
Please read all instructions carefully before using this device. This monitor is intended for home use and should not replace professional medical advice. Consult your physician for interpretation of blood pressure readings.
Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Legal Disclaimer: Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. This device is not a dietary supplement.
Setup
1. Battery Installation
The monitor requires 2 AAA batteries (not included). Open the battery compartment cover on the back of the unit. Insert the batteries according to the polarity indicators (+ and -) inside the compartment. Close the cover securely.
2. Applying the Wrist Cuff
Ensure you are relaxed and have been inactive for at least 15 minutes before taking a measurement. The standard adult wrist cuff measures 5.3”–8.5”.
- Fasten the Cuff: Wrap the cuff snugly around your left wrist, with the display facing upwards on the inside of your wrist. The cuff should be positioned approximately 0.4”–0.8” (1-2 cm) from the bend of your wrist.
- Align Unit with Wrist: Confirm that the unit is positioned correctly, not too close to your hand or elbow.
- Position Your Arm: Rest your arm on a flat surface, such as a table, and raise the unit to heart level. This ensures accurate readings.
Image: Visual guide demonstrating the three steps for taking blood pressure: 1. Fasten the cuff snugly around the wrist. 2. Align the unit 0.4"-0.8" from the bend of the wrist. 3. Position the arm on a flat surface at heart level.
Image: Diagram of the MABIS monitor with callouts pointing to key features: Low battery indicator, BP guide, Heartbeat indicator, Date & time, 120 reading memory, Wrist cuff (5.3"-8.5"), Systolic/Diastolic, Pulse, One-button operation.
Operating Instructions
Taking a Measurement
Once the cuff is correctly applied and your arm is positioned at heart level:
- Press the Power button () to turn on the monitor. The cuff will automatically inflate.
- Remain still and silent during the measurement. Movement or talking can affect accuracy.
- Once the measurement is complete, the systolic (SYS), diastolic (DIA), and pulse (PUL) readings will be displayed on the LCD screen.
- The monitor will automatically store the reading with a date and time stamp.
Image: A person's wrist with the MABIS blood pressure monitor attached, showing the display with readings. The person is pressing the power button to initiate a measurement.
Understanding Your Readings
- SYS (Systolic Pressure): The top number, indicating the pressure in your arteries when your heart beats.
- DIA (Diastolic Pressure): The bottom number, indicating the pressure in your arteries between beats.
- PUL (Pulse Rate): Your heart rate, measured in beats per minute.
- Irregular Heartbeat Detection: The monitor can detect irregular heartbeats and display an indicator if detected. This helps identify arrhythmias or palpitations.
- Visual BP Guide: The color-coded bar on the left side of the display provides a quick visual reference for your blood pressure category based on internationally established standards.
Image: Close-up view of the MABIS monitor's display, highlighting the color-coded vertical bar on the left, which serves as a visual blood pressure guide.
Memory Function
The monitor can store up to 120 readings for 2 users, complete with date and time stamps. To access stored readings, press the Memory button (). Pressing it repeatedly will cycle through the stored measurements.
Maintenance
Cleaning
Wipe the monitor and cuff with a soft, dry cloth. If necessary, use a slightly damp cloth with mild soap, then wipe dry. Do not use abrasive cleaners or immerse the unit in water.
Storage
Store the monitor in its hard protective case when not in use. Keep it in a cool, dry place, away from direct sunlight, extreme temperatures, and humidity. Remove batteries if the unit will not be used for an extended period.
Image: The MABIS blood pressure monitor displayed next to its white hard protective case, emphasizing its portability and ease of storage.
Troubleshooting
If you encounter issues with your MABIS Blood Pressure Monitor, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No display or weak display | Batteries are low or incorrectly installed. | Replace with new AAA batteries, ensuring correct polarity. |
| Inaccurate readings | Incorrect cuff placement, arm not at heart level, movement/talking during measurement, or recent physical activity. | Ensure cuff is snug and correctly positioned. Rest arm at heart level. Remain still and silent. Wait 15 minutes after activity before measuring. |
| Cuff does not inflate or inflates too little/much | Cuff not properly connected (if detachable), air leakage, or internal error. | Check cuff connection. If issue persists, contact customer support. |
| Irregular Heartbeat indicator appears frequently | Actual irregular heartbeat or movement during measurement. | Take multiple measurements to confirm. If consistent, consult a healthcare professional. Ensure stillness during measurement. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | DBP-2116 |
| Product Dimensions | 3.11"L x 2.56"W x 1.14"Th |
| Item Weight | 0.28 Pounds (4.48 ounces) |
| Power Source | 2 AAA batteries (not included) |
| Display Type | LCD |
| Cuff Size | Wrist measuring 5.3”–8.5” |
| Memory Capacity | Up to 120 readings for 2 users with date and time stamp |
| Included Components | Cuff, Hard Protective Case |
| Manufacturer | Joytech Healthcare Co., Ltd |
| Country of Origin | China |
Warranty and Support
For warranty information and customer support, please refer to the documentation included with your purchase or contact the manufacturer, Joytech Healthcare Co., Ltd, or the brand, MABIS, directly. Contact details are typically available on their official websites or product packaging.
For additional resources and product information, you may visit the MABIS Store on Amazon.