70mai Dash Cam Accessory Kit User Manual

Introduction

This user manual provides detailed instructions for the 70mai Dash Cam Accessory Kit, designed to provide essential components for the secure and stable mounting of your 70mai Dash Cam. This kit ensures universal compatibility and long-lasting performance for models A800S, A800SE, and A810.

What's in the Box

The 70mai Dash Cam Accessory Kit includes the following components:

• Electrostatic stickers x2
• Heat resistant adhesives Mount for Dash Cam A810 x1

Image: The accessory kit packaging, clearly showing the electrostatic stickers and the adhesive mount.

Compatibility

This accessory kit is universally compatible with the following 70mai Dash Cam models:

• 70mai Dash Cam A800S
• 70mai Dash Cam A800SE
• 70mai Dash Cam A810

Features

• Universal Compatibility: Designed to fit dash cam A800S, A800SE, A810, making them a perfect backup or replacement solution.
• Essential Kit: Includes spare mounts, static stickers, and 3M adhesive pads for quick replacement and secure installation.
• Secure & Stable Mounting: High-quality 3M adhesive pads ensure a firm grip on your windshield, keeping the dash cam steady even on bumpy roads.
• Easy to Install & Remove: Static stickers allow residue-free repositioning, while spare mounts offer flexibility for multi-vehicle use.
• Durable & Reliable: Made from premium materials, these accessories resist heat and vibration, ensuring long-lasting performance.

Setup and Installation

Follow these steps for proper installation of your 70mai Dash Cam using the accessory kit:

1. Prepare the Windshield: Clean the area on your windshield where the dash cam will be mounted. Ensure it is free of dust, grease, and moisture.
2. Apply Static Sticker (Optional but Recommended): For easier repositioning and residue-free removal, first apply an electrostatic sticker to the cleaned windshield area. Smooth out any air bubbles.
3. Attach Adhesive Mount: Peel off the protective film from one side of the 3M adhesive pad and firmly attach it to the dash cam mount.
4. Mount the Dash Cam: Peel off the remaining protective film from the adhesive pad (or from the adhesive pad already attached to the static sticker) and press the dash cam mount firmly onto the desired location on the windshield. Apply pressure for at least 30 seconds to ensure a strong bond.
5. Allow Adhesion Time: For optimal adhesion, it is recommended to wait at least 24 hours before driving, especially in extreme temperatures.

Note: The 3M adhesive pads are designed for a strong, permanent bond. Use the electrostatic stickers if you anticipate needing to remove or reposition the dash cam frequently without leaving residue.

Operating

This accessory kit consists of passive components designed to facilitate the mounting of your 70mai Dash Cam. There are no operational controls or functions associated with these accessories themselves. Once installed, they provide a stable base for your dash cam to operate as intended.

Maintenance

To ensure the longevity and effectiveness of your 70mai Dash Cam accessories:

• Cleaning: If the electrostatic sticker or adhesive pad becomes dirty before application, gently wipe it with a clean, lint-free cloth. Avoid using harsh chemicals.
• Storage: Store unused accessories in a cool, dry place away from direct sunlight and extreme temperatures to preserve the adhesive quality.
• Replacement: If the adhesive pad loses its stickiness or the mount becomes damaged, replace it with a new accessory from the kit to ensure secure mounting.

Troubleshooting

If you encounter issues with the accessory kit, consider the following:

• Mount Not Sticking:
  • Ensure the windshield surface is thoroughly clean and dry before application.
  • Apply firm and consistent pressure for the recommended duration during installation.
  • Allow sufficient curing time (24 hours) for the adhesive to bond properly, especially in varying temperatures.
  • If the adhesive pad has been previously used or exposed to dust, its effectiveness may be reduced. Use a new adhesive pad.
• Dash Cam Vibrates/Shakes:
  • Verify that the mount is securely attached to both the dash cam and the windshield.
  • Ensure the dash cam is properly seated in the mount.
  • Check for any loose components on the dash cam itself.
• Residue After Removal:
  • If you did not use an electrostatic sticker, some residue from the 3M adhesive may remain. This can typically be removed with an adhesive remover or rubbing alcohol.
  • For future installations, always use the provided electrostatic stickers to prevent residue.

Specifications

Warranty and Support

70mai provides reliable customer care for its products. For any inquiries or assistance, please refer to the following information:

• Warranty: 1-year warranty is provided.
• Contact Support:
  • Phone: 1-877-746-6088
  • Email: help@70mai.com
  • Operating Hours: Monday - Friday, 9 AM - 6 PM PST
• For quick solutions, you may call or email us.

Image: 70mai customer support details, including phone and email contacts.