70mai Dash Cam 4K A810 Series User Manual

Product Overview

Please read this manual carefully before using the product and keep it in a safe place.

Components:

• ① Display
• ② Function buttons
• ③ Power button
• ④ Microphone
• ⑤ Ventilation holes
• ⑥ Indicator
• ⑦ Mount slot
• ⑧ Camera
• ⑨ Speaker

Mount Components:

• ⑩ Rear camera port
• 11 Power port
• ⑫ Memory card slot
• 13 Adhesive sticker

Note: Illustrations are for reference purposes only. Actual product and functions may vary.

Installation

1. Installing the electrostatic sticker

   Paste the electrostatic sticker on the recommended area on the front windshield. Press the sticker to remove air bubbles.

   Avoid the edge of the windshield and select a flat, smooth area. Keep the windshield clean and dry to prevent the sticker from losing adhesion.

2. Installing the mount

   Attach the mount into the mount slot and slide up.

3. Installing the memory card

   Insert the memory card into the card slot.

4. Mounting the dash cam

   Paste the dash cam onto the electrostatic sticker.

5. Routing cable

   Route the power cord to the cigarette lighter and connect power.

   Notes:

   • Use the included wiring trim tool to hide the power cord under the vehicle's headliner and rubber seal along the A-pillar.
   • The cigarette lighter socket location may vary by vehicle.
6. Adjusting the camera angle

   Turn on the dash cam and adjust the camera angle based on the preview screen.

Accessories (Optional)

The rear recording function requires rear cameras. Scan the QR code for the rear camera operation guide. It is recommended to use a 70mai brand rear camera to avoid incompatibility.

Download 70mai App

This product can be used with the 70mai app. Download and install the app by scanning the QR code or searching for "70mai" in the app store. Requires Android 4.4 & iOS 9.0 or above.

Online Guide

For more on product functions and FAQs, please see the user guide by scanning the QR code.

Package Contents

Dash Cam Only:

• Dash Cam × 1
• Mount × 1
• Power cord × 1
• Car charger × 1
• Wiring trim tool × 1
• Electrostatic sticker × 1
• User manual × 1

Dash Cam Set:

• Dash Cam × 1
• Mount × 1
• Power cord × 1
• Car charger × 1
• Wiring trim tool × 1
• Electrostatic sticker × 1
• User manual × 1
• Rear camera package* × 1 (*Includes rear camera, lead wire, signal wire, and accessories)

Refer to the rear camera user manual for more information.

Specifications

• Product: Dash Cam
• Model: A810, A810-2
• Input: 5V = 2A
• Battery capacity: 500mAh
• Resolution: 3840 x 2160
• Lens: FOV 150°, F1.8
• Battery type: Li-ion battery
• Power supply: Car cigarette lighter
• Wireless connectivity: Wi-Fi IEEE 802.11 b/g/n 2.4GHz

Memory Card Instructions

• A memory card (sold separately) must be installed before use.
• Supports standard MicroSD cards with a minimum capacity of 32GB and U3(UHS-3) rating or above.
• Format the memory card in the dash cam before first use. Formatting deletes all files. Back up important data beforehand.
• Memory cards may degrade over time. Replace if video/image saving is affected.
• Use high-quality memory cards from reputable vendors. Inferior cards may have incorrect speed or capacity ratings. 70mai is not liable for lost/damaged videos due to low-quality cards.
• Format the memory card every two weeks to maintain optimal speeds.
• Do not insert or remove the memory card while the dash cam is turned on.

Precautions

• Read precautions and the online guide for safe use.
• The dash cam assists drivers by recording the environment; it does not guarantee driving safety. 70mai is not liable for accidents or data loss from operating the dash cam while driving.
• Some functions may not work properly due to vehicle conditions, driving style, or environment. Power failure, extreme temperatures, collisions, or damaged memory cards can cause abnormal function. Videos are for reference only.
• Install correctly, ensuring it does not block the driver's line of sight or airbags.
• Use only included accessories (car charger, power cord) to avoid product failure. 70mai is not liable for damage caused by non-genuine accessories.
• If the battery is deformed, swollen, or leaking, stop use immediately and contact after-sales service.
• Keep away from strong magnetic fields.
• Do not use in temperatures above 60°C or below -10°C.
• Use only within the scope permitted by law.

Regulatory Compliance Information

WEEE Information

This symbol indicates waste electrical and electronic equipment. Dispose of it at a designated collection point for recycling, not with household waste. This protects human health and the environment.

EU Declaration of Conformity

This equipment complies with applicable EU Directives. The full declaration is available at: https://help.70mai.asia/1193.html

UKCA Declaration of Conformity

This equipment complies with UK Radio Equipment Regulations 2017. The full declaration is available at: https://help.70mai.asia/2145.html

Cautions

• Do not dispose of batteries in fire, hot ovens, or by crushing/cutting, as this can cause explosions.
• Avoid high temperatures, which can cause explosions or leaks.
• Avoid extremely low air pressure, which can cause explosions or leaks.
• The device has a non-removable built-in battery. Do not disassemble or modify it.
• Using an incorrect battery type can defeat safeguards.

FCC

This equipment complies with FCC Part 15 limits for Class B digital devices. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received. Modifications not approved by the responsible party may void the user's authority to operate the equipment.

To correct interference: Reorient/relocate the receiving antenna, increase separation between equipment and receiver, connect to a different circuit, or consult a dealer/technician.

This equipment complies with FCC radiation exposure limits for uncontrolled environments. Maintain a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operated with any other antenna or transmitter.

FCC ID: 2AOK9-A810

ISED Compliance Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation.

ISED Radiation Exposure Statement

This equipment complies with IC RSS-102 radiation exposure limits for uncontrolled environments. Install and operate with a minimum distance of 20 cm between the radiator and your body.

IC: 28033-A810