1. Product Overview
This TAHIKO engine and transmission mount set is designed to securely support the engine and transmission within your vehicle's chassis. These mounts are crucial for absorbing vibrations and shocks generated by the powertrain, ensuring a smoother and quieter ride while preventing excessive movement of the engine and transmission.
An official product video showcasing the TAHIKO engine and transmission mount set, demonstrating the individual components and their design.
2. Compatibility
This mount set is compatible with the following vehicle:
- Make: Mitsubishi
- Model: Lancer 2.0L
- Years: 2002, 2003, 2004, 2005, 2006, 2007
- Transmission Type: Automatic Transmission (AUTO Trans Mount)
Interchange Part Numbers for reference:
- 9181, 9037, 8818, 8819, 9188, 9170, 9569
- EM-9037, EM-9181, EM-8818, EM-8819, EM-9188, EM-9170, EM-5825
- A6647, A6688, A6669, A4606, A4617, A4641
- MB309486, MR333578, MR297256, MR491479, MR403666, MR554541
3. Package Contents
The TAHIKO Engine & Transmission Mount Set includes the following 4 components:
- Front Motor Mount: Designed to support the front of the engine.
Detailed view of the Front Motor Mount, including key dimensions. - Front Right Motor Mount: Positioned on the front right side to provide additional engine support.
Detailed view of the Front Right Motor Mount, including key dimensions. - Rear Motor Mount: Supports the rear of the engine, often near the firewall.
Detailed view of the Rear Motor Mount, including key dimensions. - Transmission Mount: Specifically designed for automatic transmissions, supporting the transmission unit.
Detailed view of the Transmission Mount, including key dimensions.
4. Installation
Installation of engine and transmission mounts requires specialized tools and automotive knowledge. It is highly recommended that installation be performed by a certified professional mechanic.
General Guidance:
- Safety First: Always ensure the vehicle is securely supported on jack stands or a lift. Disconnect the battery before beginning work.
- Vehicle Service Manual: Refer to your vehicle's specific service manual for detailed, step-by-step instructions, torque specifications, and any special tools required for your Mitsubishi Lancer model.
- Component Identification: Carefully identify the correct placement for each mount (Front, Front Right, Rear, Transmission) before removal and installation.
- Support Powertrain: Use a suitable engine hoist or transmission jack to support the engine and transmission during the removal of old mounts and installation of new ones.
- Torque Specifications: Tighten all fasteners to the manufacturer's specified torque values to ensure proper function and safety.
5. Maintenance
Engine and transmission mounts are wear-and-tear components. Regular inspection can help identify potential issues before they become severe.
Recommended Maintenance:
- Periodic Inspection: During routine vehicle maintenance (e.g., oil changes), visually inspect the mounts for signs of wear, cracking, tearing of the rubber, or fluid leaks (if hydraulic mounts).
- Check for Looseness: Ensure all mounting bolts are secure and properly torqued.
- Address Issues Promptly: If any signs of damage or excessive wear are observed, consult a qualified mechanic for assessment and replacement.
6. Troubleshooting
Symptoms of failing engine or transmission mounts can include increased vibration, noise, or harsh shifts. If you experience any of the following, it may indicate an issue with your mounts:
- Excessive Engine Vibration: Noticeable vibrations felt through the steering wheel, floor, or seats, especially at idle or specific RPMs.
- Clunking or Banging Noises: Sounds coming from the engine bay during acceleration, deceleration, or shifting gears.
- Harsh Shifting: Automatic transmission shifts feel unusually abrupt or rough.
- Engine Movement: Visible or excessive movement of the engine when the vehicle is in gear and the brakes are applied (with caution and professional supervision).
If you suspect an issue with your engine or transmission mounts, it is advisable to have your vehicle inspected by a professional mechanic.
7. Specifications
| Feature | Specification |
|---|---|
| Brand | TAHIKO |
| Model Number | MN-0041566 |
| Material | Metal and Rubber |
| Item Weight (Set) | Approximately 4700 Grams (10.3 lbs) |
| Included Components | 1x Front Motor Mount, 1x Front Right Motor Mount, 1x Rear Motor Mount, 1x Transmission Mount |
| Placement on Vehicle | Front, Front Right, Rear |
| UPC | 606089359543, 602309497057 |
Note: All parts are tested during the manufacturing process to ensure proper management of engine torque and dampening of excess noise and vibration. Superior materials (steel and rubber) are utilized to meet OE standards.
8. Warranty and Support
This TAHIKO engine and transmission mount set comes with a 5-Year Limited Warranty.
For warranty claims, technical support, or any questions regarding the product, please contact the seller or manufacturer directly through the platform where the purchase was made. Please have your order details and product model number (MN-0041566) available when contacting support.