PuraFlame 1684a1bc-ea72-4d84-a712-df3ff8c169c8

Download PDF
Contents

PuraFlame Western Electric Fireplace Insert User Manual

Model: 1684a1bc-ea72-4d84-a712-df3ff8c169c8

Introduction

The PuraFlame Western Electric Fireplace Insert is designed to provide the ambiance of a traditional fireplace with the convenience and safety of an electric unit. Featuring realistic resin logs, adjustable flame settings, and a supplemental heater, this insert offers a comfortable and visually appealing addition to your living space. It is intended for indoor use and provides supplemental heat for areas up to 400 sq. ft.

PuraFlame Western Electric Fireplace Insert with remote control

Image: The PuraFlame Western Electric Fireplace Insert, showcasing its realistic flame effect and included remote control.

Safety Information

Please read all instructions carefully before installation and operation. Failure to follow these instructions may result in fire, electric shock, or personal injury.

  • This electric fireplace insert operates on a 120V power supply. Do not attempt to hardwire the unit; it is designed for plug-in use only.
  • The unit provides supplemental heat for areas up to 400 sq. ft. It is not intended to be used as a primary heat source for your home.
  • Ensure the power cord is not pinched or routed under carpets or other objects that could damage it.
  • Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 meters) from the front of the heater.
  • Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
  • Always unplug the fireplace when not in use.

Package Contents

Verify that all components are present before beginning installation.

  • PuraFlame Western Electric Fireplace Insert
  • Trim Kit (if purchased as a bundle)
  • Remote Control
  • AAA Batteries (2, included for remote control)
  • User Manual

Note: The fireplace insert and trim kit may be delivered in two separate packages on different days.

Illustration of two packages being delivered by a truck to a customer

Image: Visual representation of the product potentially arriving in two separate packages.

Setup and Installation

The PuraFlame Western Electric Fireplace Insert is designed for easy installation. It features a flat bottom, allowing it to sit directly on the floor within a suitable fireplace opening or mantel.

1. Measure Your Fireplace Opening

Before installation, ensure your fireplace opening meets the required dimensions for the 30" model with trim kit. The overall dimensions of the unit are approximately 40.9" Wide x 29.1" High x 8.8" Deep.

Diagram showing product dimensions: 40.9 inches wide, 29.1 inches high, 8.8 inches deep

Image: Detailed product dimensions for the PuraFlame Western Electric Fireplace Insert.

Diagram illustrating how to measure a fireplace opening for the insert, showing minimum and maximum width, height, and suggested depth

Image: Guide for measuring your existing fireplace opening to ensure proper fit.

2. Placement

Carefully unbox the fireplace insert. Due to its flat bottom design, the insert can be placed directly onto a flat, stable surface within your fireplace opening. If using the trim kit, attach it according to the separate instructions provided with the trim kit.

Electric fireplace insert without trim placed inside a brick fireplace opening

Image: The fireplace insert positioned within a traditional brick fireplace opening.

Electric fireplace insert with trim installed in a brick fireplace opening

Image: The fireplace insert with the trim kit installed, providing a finished look.

3. Power Connection

Plug the power cord into a standard 120V electrical outlet. Ensure the outlet is easily accessible and not overloaded with other appliances.

Operating Instructions

Your PuraFlame electric fireplace insert can be operated using the included remote control.

Diagram of the remote control with buttons for flame effects, 750W heater, 1500W heater, crackling sounds, and ON/OFF

Image: Layout of the remote control for the fireplace insert, detailing button functions.

Remote Control Functions:

  • ON/OFF Button: Press to turn the fireplace unit on or off.
  • Flame Button: Cycles through 3 different flame settings, allowing you to adjust the intensity and brightness of the flame effect. The flame effect can be used independently of the heater.
  • Heater Buttons (750W / 1500W): Select between two heat settings. The 750W setting provides lower heat output, while the 1500W setting provides maximum heat. The adjustable thermostat will maintain your desired room temperature.
  • Crackling Sound Button: Activates or deactivates the fire crackling sound effect. There are 6 different crackling sound options to choose from.

The realistic resin log set and ember bed provide an authentic wood-burning fireplace appearance.

Close-up view of the resin log set and ember bed with a tape measure showing 7.5 inches deep fuel bed

Image: Close-up of the realistic resin log set and ember bed.

Close-up of the electric fireplace's flame effect and resin logs

Image: A detailed view of the vibrant flame effect and the textured resin logs.

Close-up of the top vent of the electric fireplace insert

Image: Detail of the top vent, where heat is emitted.

Maintenance

Regular maintenance will help ensure the longevity and optimal performance of your electric fireplace insert.

  • Cleaning: Ensure the unit is turned off and unplugged before cleaning. Use a soft, damp cloth to wipe down the exterior surfaces. Do not use abrasive cleaners or sprays.
  • Ventilation: Periodically check the air intake and exhaust vents for dust or debris accumulation. Gently clean with a soft brush or vacuum cleaner attachment to ensure proper airflow.
  • Log Set: The resin log set does not require maintenance. Avoid placing objects on the logs or attempting to move them.

Troubleshooting

If you experience issues with your PuraFlame electric fireplace insert, refer to the following common solutions:

ProblemPossible CauseSolution
Unit does not turn on.No power, remote control batteries dead, or unit is off.Check power cord connection. Replace remote control batteries. Ensure the ON/OFF button is pressed.
No heat output.Heater not activated, or thermostat set too low.Press the 750W or 1500W heater button. Increase the thermostat setting.
Flame effect not working.Flame effect is off.Press the Flame button to cycle through settings.
Crackling sound not working.Sound effect is off.Press the Crackling Sound button to activate.

If the problem persists after attempting these solutions, please contact PuraFlame customer service for assistance.

Specifications

FeatureDetail
BrandPuraFlame
Model NamePuraFlame 23 Inches Western Electric Fireplace Insert
Product Dimensions8.8"D x 40.9"W x 29.1"H
MaterialMetal
Finish TypePolished
Installation TypeFreestanding
Power SourceAC
Heat Output5120 British Thermal Units (750W/1500W)
Heating Coverage400 square feet
Special FeatureAdjustable Thermostat, LED Flame
Included ComponentsRemote Control
Batteries2 AAA batteries (included)
Burner TypeResin Log
ManufacturerNingbo Richen Electrical Appliance Co., Ltd.

Warranty and Support

The PuraFlame Western Electric Fireplace Insert comes with a one-year warranty from the date of purchase. For any questions, technical assistance, or warranty claims, please contact PuraFlame customer service.

You can find more information and contact details on the official PuraFlame store page: PuraFlame Store

© 2024 PuraFlame. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.