Introduction
Thank you for choosing the Celly Wireless Speaker 5 W Pyspeaker. This manual provides essential information for setting up, operating, and maintaining your speaker to ensure optimal performance and longevity. Please read this manual thoroughly before using the product.
Figure 1: Celly Pyspeaker Wireless Speaker. This image displays the cylindrical speaker in a dark grey color, featuring a textured mesh grille around its body and control buttons on one side.
1. Setup
1.1 Charging the Speaker
Before first use, fully charge the speaker. Connect the supplied USB-C charging cable to the speaker's USB-C port and the other end to a compatible USB power adapter (not included) or a computer's USB port. The charging indicator light will show the charging status and turn off when fully charged. A full charge provides approximately 4 hours of autonomy.
1.2 Powering On/Off
- To Power On: Press and hold the Power button (usually marked with a power symbol) for a few seconds until you hear an audible prompt or see an indicator light illuminate.
- To Power Off: Press and hold the Power button again for a few seconds until the speaker powers down.
1.3 Bluetooth Pairing
- Ensure the speaker is powered on and in pairing mode (indicated by a flashing LED, if present).
- On your device (smartphone, tablet, laptop), enable Bluetooth and search for available devices.
- Select "PYSPEAKER" from the list of found devices.
- Once connected, the speaker will provide an audible confirmation, and the LED indicator will typically become solid.
1.4 True Wireless Stereo (TWS) Function
The PYSPEAKER supports True Wireless Stereo (TWS) function, allowing you to pair two PYSPEAKER units for an immersive stereo audio experience.
- Ensure both PYSPEAKER units are powered on and not connected to any other Bluetooth device.
- On one speaker (this will be the primary speaker), press the TWS pairing button (refer to speaker controls for specific button, if available, otherwise assume a long press on a specific button like Play/Pause or Mode).
- The two speakers will automatically search for and connect to each other. You will hear a confirmation tone once paired.
- Once TWS paired, connect your device to the primary speaker via Bluetooth as described in section 1.3. Audio will now play through both speakers in stereo.
1.5 AUX Connection
For devices without Bluetooth, or for a wired connection, use the 3.5mm AUX input.
- Connect one end of a 3.5mm audio cable (not included) to the speaker's AUX port.
- Connect the other end to the audio output jack of your device.
- The speaker will automatically switch to AUX mode, or you may need to press a "Mode" button to select AUX input.
2. Operating the Speaker
2.1 Basic Controls
The PYSPEAKER features intuitive controls for media playback and volume adjustment. While specific button functions may vary slightly, common controls include:
- Play/Pause: Press the Play/Pause button (often marked with a triangle or || symbol) to start or pause playback.
- Volume Up/Down: Press the '+' button to increase volume and the '-' button to decrease volume.
- Next/Previous Track: Long press or double-press the '+' or '-' buttons to skip to the next or previous track, respectively (functionality may vary by model).
- Mode Button: If present, press to switch between Bluetooth and AUX input modes.
For detailed control mapping, refer to the quick start guide or markings on the speaker itself.
3. Maintenance
3.1 Cleaning
To clean your speaker, use a soft, dry, lint-free cloth. Do not use abrasive cleaners, alcohol, or chemical solvents, as these may damage the surface or internal components. For stubborn dirt, a slightly damp cloth can be used, ensuring no moisture enters the ports.
3.2 Storage
When not in use for extended periods, store the speaker in a cool, dry place away from direct sunlight and extreme temperatures. It is recommended to charge the battery periodically (e.g., every 3-6 months) to maintain battery health.
3.3 Water Resistance
The PYSPEAKER is waterproof. However, ensure all port covers are securely closed before exposing the speaker to water. Do not submerge the speaker beyond its rated depth or for extended periods. After exposure to water, dry the speaker thoroughly before charging to prevent damage to the charging port.
4. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on. | Low battery; Power button not pressed correctly. | Charge the speaker fully. Press and hold the Power button for a longer duration. |
| Cannot pair via Bluetooth. | Speaker not in pairing mode; Device Bluetooth off; Too far from speaker; Interference. | Ensure speaker is in pairing mode. Turn device Bluetooth off and on. Move device closer to speaker. Avoid strong Wi-Fi signals or other Bluetooth devices. |
| No sound from speaker. | Volume too low; Incorrect input mode; Device not playing audio. | Increase speaker and device volume. Ensure correct input mode (Bluetooth/AUX) is selected. Check if audio is playing on the connected device. |
| TWS pairing fails. | Speakers too far apart; One speaker already connected to a device. | Ensure both speakers are close to each other. Disconnect any Bluetooth devices from both speakers before initiating TWS pairing. |
5. Specifications
| Model Name | SPEAKER WIRELESS 5W |
| Item Model Number | PYSPEAKER |
| Speaker Type | Outdoor |
| Connectivity Technology | Auxiliary, Bluetooth, USB, WLAN |
| Audio Output Mode | Stereo |
| Speaker Maximum Output Power | 5 Watts |
| Battery Life | 4 Hours |
| Battery Type | 1 Lithium Polymer battery required |
| Battery Capacity | 1200 (implied from '1200' in specs, assuming mAh) |
| Product Dimensions | 8D x 10.5W x 8H centimetres |
| Item Weight | 373 Grams |
| Waterproof | Yes |
| Included Components | Wireless speaker, charging cable, manual |
| Compatible Devices | Smartphone, tablet, laptop, television, desktop, gaming console |
| Recommended Uses | For Smartphones or Tablets |
6. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Celly website. Keep your proof of purchase for warranty claims.
Celly, with over 20 years of experience, produces and distributes innovative and high-quality accessories. For further assistance, please contact Celly customer service through their official channels.
