Dolonm Full Size Platform Bed with Upholstered Headboard - Instruction Manual

Introduction

Thank you for choosing the Dolonm Full Size Platform Bed. This manual provides comprehensive instructions for the safe assembly, operation, and maintenance of your new bed frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

This platform bed features a sturdy design with an upholstered headboard, durable slat support, and heavy-duty feet, eliminating the need for a box spring. It is engineered for stability and noise-free use.

Important Safety Information

• Always assemble the bed on a soft, clean surface to prevent damage.
• Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
• Tighten all bolts and screws firmly, but do not overtighten. Periodically check and re-tighten all fasteners.
• Do not allow children to play on or around the bed during assembly.
• Maximum weight capacity: 800 pounds. Do not exceed this limit.
• Use only with a compatible full-size mattress.

Package Contents

Verify that all components listed below are included in your package. If any parts are missing or damaged, please contact customer support.

Image: Diagram showing all components included in the bed frame package.

The package includes the upholstered headboard, side rails, center support beams, wooden slats, and all necessary hardware for assembly.

Setup and Assembly

Follow these steps to assemble your Dolonm Full Size Platform Bed. It is recommended to have two people for assembly.

Assembly Video Guide

Step-by-Step Instructions

1. Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a clean, soft surface. Refer to the parts list in the package contents section to identify each piece.
   

   Image: All bed frame components laid out before assembly.

2. Attach Legs to Side Rails: Securely attach the bed legs to the side rails using the provided screws and Allen wrench. Ensure they are tightened by 70% initially, then fully tighten after all connections are made.
   

   Image: Close-up view of the sturdy bed legs.

3. Connect Headboard and Footboard: Attach the side rails to the upholstered headboard and footboard. Ensure the notches align correctly. If they don't fit, slightly loosen screws C, then tighten after insertion.
   

   Image: The upholstered headboard, showing its design.

4. Install Center Support Beams: Place the center support beams across the frame and secure them. These beams provide additional stability for the mattress.
5. Lay Out Slats: Unroll and place the wooden slats evenly across the bed frame. Ensure each slat is properly seated and secured to the side rails. The slats are designed to support the mattress directly, eliminating the need for a box spring.
   

   Image: Detail of the durable wooden slats providing mattress support.

6. Final Tightening: Once all components are in place, go back and fully tighten all screws and bolts.

Operating Instructions

Your Dolonm Platform Bed is designed for optimal comfort and support. Place your full-size mattress directly onto the wooden slats. No box spring is required. The bed frame is engineered to provide a stable and noise-free foundation for your mattress.

Image: The fully assembled Dolonm Full Size Platform Bed with a mattress.

Maintenance and Care

• Cleaning: For the velvet fabric headboard, gently spot clean with a damp cloth and mild detergent. Avoid harsh chemicals. For the metal frame, wipe with a soft, dry cloth.
• Regular Checks: Periodically inspect all bolts and screws to ensure they remain tight. Re-tighten as necessary to maintain stability and prevent noise.
• Avoid Excessive Weight: Do not jump on the bed or place excessive weight on any single point to prevent damage to the slats or frame.

Troubleshooting

Specifications

• Model: W1793115344-SOLDF
• Size: Full
• Product Dimensions: 77.16"L x 55.51"W x 45.27"H
• Color: Black Velvet
• Material: Pine Wood (slats), 80% Pine Wood, 20% Polyester (fabric)
• Weight Capacity: Up to 800 pounds
• Box Spring Required: No
• Assembly Required: Yes
• Manufacturer: Dolonm

Image: Diagram illustrating the dimensions of the Dolonm Full Size Platform Bed.

Warranty and Support

For warranty information, missing parts, or technical assistance, please contact Dolonm customer support through the retailer where the product was purchased. Please have your model number (W1793115344-SOLDF) and purchase date available when contacting support.

Visit the official Dolonm Store for more products and information: Dolonm Store