Introduction
This manual provides essential instructions for the safe and effective use of your Kircuit 35V AC/DC Adapter. This adapter is designed to provide power and charge 29.6V Li-ion batteries for compatible Kogan Cordless Stick Vacuum Cleaners, including models such as MX11, C10, T10, Z11, V11 Pro, Z6, V6, KAVACSTM11X, KAVACSTC10A, KAVACSTT10B, and KAVACSTV11A. Please read this manual thoroughly before use and retain it for future reference.
Image: The Kircuit 35V AC/DC Adapter, displaying its label with input (100-240V AC) and output specifications. The adapter is black with a standard US 2-pin plug.
Safety Information
To ensure safe operation and prevent damage, always adhere to the following safety guidelines:
- Use the adapter only with compatible devices as specified in this manual.
- Do not expose the adapter to water, moisture, or extreme temperatures.
- Avoid dropping or subjecting the adapter to strong impacts.
- Do not attempt to disassemble or modify the adapter. This may void the warranty and pose safety risks.
- Ensure the power outlet voltage matches the adapter's input specifications (100-240V AC).
- Unplug the adapter from the power outlet when not in use or during electrical storms.
- Keep out of reach of children.
Setup
Follow these steps to set up your Kircuit AC/DC Adapter:
- Inspect the Adapter: Before first use, visually inspect the adapter and its cable for any signs of damage. Do not use if damaged.
- Connect to Device: Insert the barrel plug connector of the adapter firmly into the charging port of your compatible Kogan Cordless Stick Vacuum Cleaner.
- Connect to Power Outlet: Plug the adapter's 2-pin power plug into a standard 100-240V AC wall outlet.
Image: The Kircuit AC/DC Adapter plugged into a white power strip on a desk, demonstrating a typical connection scenario. The adapter's cable is coiled neatly.
Operating Instructions
Once connected, the adapter will begin to power or charge your device. The charging indicator on your vacuum cleaner (if present) will show the charging status.
- Charging: Allow the vacuum cleaner's battery to charge fully before its first use or after prolonged storage. Refer to your vacuum cleaner's manual for specific charging times.
- Overcharge Protection: The adapter features built-in protection against overcharging, ensuring the longevity of your device's battery.
- Disconnection: To disconnect, first unplug the adapter from the wall outlet, then disconnect the barrel plug from your vacuum cleaner.
Image: The Kircuit AC/DC Adapter with its power cord extended, highlighting the 6.5 ft (approximately 2 meters) cord length for convenient reach.
Maintenance
Proper maintenance ensures the adapter's longevity and safe operation:
- Cleaning: Disconnect the adapter from all power sources before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
- Storage: Store the adapter in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly coiling the cable to prevent damage.
- Cable Care: Do not bend, twist, or pull the cable excessively. Regularly check the cable for cuts, fraying, or exposed wires. If any damage is observed, discontinue use immediately.
Troubleshooting
If you encounter issues with your adapter, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Adapter not powering device/charging |
|
|
| Adapter feels hot during use |
|
|
If the problem persists after trying these solutions, please contact customer support.
Specifications
| Brand | Kircuit |
| Model | AC/DC Adapter B0CH3GJ1F1 |
| Input Voltage | 100-240V AC, 50/60Hz |
| Output Voltage | 35V DC (compatible with 29.6V Li-ion batteries) |
| Connector Type | Barrel Plug |
| Power Source | Corded Electric |
| Special Features | Dynamic IC, Charger IC & Power fuse for rapid charging and overcharge protection. |
| Compatible Devices | Kogan MX11, C10, T10, Z11, V11 Pro, Z6, V6, KAVACSTM11X, KAVACSTC10A, KAVACSTT10B, KAVACSTV11A 29.6V Li-ion Battery Cordless Stick Vacuum Cleaners. |
Warranty and Support
This product is covered by standard manufacturer warranties. For specific warranty details, please refer to the documentation provided with your purchase or contact the seller directly.
For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact the seller, EPtech, through your purchase platform. You may also refer to the Kircuit brand's official support channels if available.
- Return Policy: The product typically includes a 30-day return/replacement policy from the date of purchase.
- Protection Plans: Extended protection plans may be available for purchase separately.