Kircuit 24V AC/DC Adapter Compatible with VEVOR Y486 Bluetooth Thermal Label Printer Wireless Shipping w/Automatic Recognition 2
Instruction Manual
Kircuit 24V AC/DC Adapter for VEVOR Y486 Thermal Label Printer
Product Overview
This Kircuit 24V AC/DC Adapter is specifically designed to provide power to the VEVOR Y486 Bluetooth Thermal Label Printer. It serves as a reliable replacement or travel backup power supply unit, ensuring consistent performance for your label printer.
The adapter features a wide input voltage range of 100V-240V AC, making it suitable for use in various regions. For enhanced safety and efficiency, it incorporates a dynamic IC, charger IC, and power fuse, which collectively provide rapid charging capabilities and protection against overcharge.
Figure 1: Kircuit 24V AC/DC Adapter, showing the main power brick, AC input cable, and DC output cable with barrel plug.
Safety Information
Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or damage to the product or connected devices.
- Use only with compatible devices as specified.
- Do not expose the adapter to water, moisture, or extreme temperatures.
- Avoid dropping or subjecting the adapter to severe impact.
- Do not attempt to open, modify, or repair the adapter. Refer all servicing to qualified personnel.
- Ensure the power outlet is easily accessible and unplug the adapter during lightning storms or when unused for long periods.
- Keep out of reach of children.
Setup
Follow these steps to properly set up your Kircuit 24V AC/DC Adapter:
- Unpack the Adapter: Carefully remove the AC/DC adapter and its associated cables from the packaging.
- Connect the AC Power Cord: Insert the two-prong end of the AC power cord into the AC input port on the adapter brick. Ensure it is firmly seated.
- Connect to Device: Locate the power input port on your VEVOR Y486 Bluetooth Thermal Label Printer. Insert the barrel plug from the adapter's DC output cable into this port.
- Plug into Wall Outlet: Insert the two-prong plug of the AC power cord into a standard 100V-240V AC wall outlet.
- Verify Connection: Once plugged in, the adapter should provide power to your label printer. Refer to your printer's manual for indicators of successful power connection.
Figure 2: The Kircuit AC/DC adapter connected to a power outlet, demonstrating typical usage.
Operating Instructions
The Kircuit 24V AC/DC Adapter operates automatically once connected to a power source and a compatible device. It is designed for continuous power supply.
- Ensure the adapter is connected to a stable power source within the specified input voltage range (100V-240V AC).
- The adapter will provide a stable 24V DC output to the connected VEVOR Y486 Bluetooth Thermal Label Printer.
- An anti-interference magnetic ring is integrated into the cable to enhance signal stability and reduce electromagnetic interference during operation.
Figure 3: Detailed view of the adapter, showing its dimensions and the anti-interference magnetic ring on the DC output cable.
Maintenance
Proper maintenance ensures the longevity and safe operation of your AC/DC adapter.
- Cleaning: Disconnect the adapter from the power outlet and the device before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or aerosols.
- Storage: When not in use, store the adapter in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly coiling the cables to prevent damage.
- Inspection: Periodically inspect the cables and connectors for any signs of wear, fraying, or damage. If any damage is observed, discontinue use and replace the adapter.
Troubleshooting
If you encounter issues with your Kircuit 24V AC/DC Adapter, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| No power to device | Adapter not plugged in; faulty outlet; loose connection; damaged adapter. | Ensure all connections are secure. Try a different wall outlet. Inspect adapter and cables for damage. If damaged, replace the adapter. |
| Device not charging/powering on | Incorrect adapter voltage/current; device issue. | Verify the adapter's specifications match your device's requirements (24V DC). Test the device with its original adapter if available. |
| Adapter feels hot | Normal operation under load; inadequate ventilation; overloaded circuit. | A slight warmth is normal. Ensure the adapter is in a well-ventilated area. If excessively hot or emitting smoke/smell, unplug immediately and discontinue use. |
Specifications
Key technical specifications for the Kircuit 24V AC/DC Adapter:
| Feature | Detail |
|---|---|
| Brand | Kircuit |
| Input Voltage | 100-240 Volts AC |
| Output Voltage | 24 Volts DC |
| Connectivity Technology | Powerline |
| Connector Type | Barrel Plug |
| Compatible Devices | VEVOR Y486 Bluetooth Thermal Label Printer |
| Special Feature | 100% Brand New, High Quality AC/DC Power Charger (non-OEM) |
| Color | Black |
| Manufacturer | Shenzhen Waweis Technology Co., Ltd |
| First Available | September 1, 2023 |
Warranty and Support
For information regarding warranty coverage or technical support for your Kircuit 24V AC/DC Adapter, please refer to the seller's policy on the purchase platform or contact the manufacturer directly.
Please retain your proof of purchase for any warranty claims.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.