1. Introduction
This manual provides essential information for the safe and effective use of your onerbl 12V AC/DC Adapter. Please read these instructions carefully before use and retain them for future reference. This adapter is designed to provide reliable power to compatible devices, specifically POPSKY TT202 series vintage turntable record players.
2. Safety Information
To prevent electric shock, fire, or damage to the adapter or connected device, observe the following safety precautions:
- Ensure the adapter's voltage and current specifications match the requirements of your device.
- Do not expose the adapter to water, moisture, or extreme temperatures.
- Avoid dropping or subjecting the adapter to strong impacts.
- Do not attempt to open, modify, or repair the adapter. Refer servicing to qualified personnel.
- Unplug the adapter from the power outlet when not in use for extended periods.
- Keep the adapter away from children.
3. Product Overview
The onerbl 12V AC/DC Adapter is a high-quality replacement power supply designed for durability and safety. It features a compact design and multiple protection mechanisms.
3.1 Key Features
- Input: AC 100-240V, 50/60Hz (Worldwide AC Input)
- Output: DC 12V (specific current output depends on the model, ensure compatibility)
- Protections: Over Voltage Protection, Over Heat Protection, Short-Circuit Protection, Over-Current Protection
- Durable design with quality components.
3.2 Components
4. Setup
Follow these steps to properly set up your onerbl 12V AC/DC Adapter:
- Verify Compatibility: Confirm that your device (e.g., POPSKY TT202 series turntable) requires a 12V DC input and that the adapter's barrel connector size matches your device's power input port.
- Connect to Device: Insert the DC barrel connector of the adapter firmly into the power input port of your POPSKY turntable.
- Connect to Power Outlet: Plug the AC adapter into a standard wall power outlet (AC 100-240V, 50/60Hz). Ensure the outlet is easily accessible.
- Power On: Once connected, you can power on your device according to its own operating instructions.
5. Operating Instructions
The onerbl 12V AC/DC Adapter operates automatically once connected to a power source and a compatible device. It provides a stable 12V DC output.
- Ensure all connections are secure before powering on your device.
- The adapter is designed for continuous operation within its specified limits.
- If your device has an on/off switch, use that to control its power.
6. Maintenance
Minimal maintenance is required for the onerbl 12V AC/DC Adapter:
- Keep the adapter clean by wiping it with a dry, soft cloth.
- Do not use liquid cleaners or solvents.
- Regularly inspect the cable for any signs of damage, such as fraying or cuts. If damage is found, discontinue use immediately and replace the adapter.
- Store the adapter in a cool, dry place when not in use.
7. Troubleshooting
If you encounter issues with your adapter, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Adapter not plugged in correctly. | Ensure the adapter is fully inserted into both the wall outlet and the device's power port. |
| Device does not power on. | Wall outlet is not active. | Test the wall outlet with another working appliance. |
| Device does not power on. | Adapter or device is faulty. | If possible, test the adapter with another compatible device, or test the device with another known-good adapter. If the adapter is faulty, replace it. |
| Adapter feels excessively hot. | Overload or poor ventilation. | Ensure the device's power requirements do not exceed the adapter's capacity. Provide adequate ventilation around the adapter. If overheating persists, discontinue use. |
8. Specifications
- Brand: onerbl
- Input: AC 100-240V, 50/60Hz
- Output: DC 12V (Current output depends on specific model, typically sufficient for POPSKY TT202 series)
- Connector Type: Barrel Connector, AC Plug
- Color: Black
- Dimensions (Adapter Body): Approximately 2.6 inches (Length) x 1.6 inches (Width) x 1.2 inches (Height)
- Cable Length: Approximately 76 inches (6.33 feet)
- Protections: Over Voltage Protection, Over Heat Protection, Short-Circuit Protection, Over-Current Protection
- Manufacturer: Shenzhen Waweis Technology Co., Ltd
9. Warranty and Support
For warranty information or technical support, please refer to the documentation provided with your purchase or contact the retailer. Keep your purchase receipt as proof of purchase.
